[1]Prischow G, Junghans G. Open System Controllers --a Challenge for the Future of the Machine Tool Industry[J]. Annals of CIRP, 1993,41 (1) : 449- 452.
[2]Minhat M, Vyatkin V, Xu X, et al. A Novel Open CNC Architecture Based on STEP-- NC Data Model and IEC 61499 Function Block[J]. Robotics and Computer -- Integrated Manufacturing , 2009, 25 : 560-569.
[3]Sungsik P, Sun H K, Hyunbo C. Kernel Software for Efficiently Building, Re--configuring, and Dis- tributing an Open CNC Controller[J]. International Journal of Advanced Manufacturing Technology, 2006, 27: 788-796.
[4]Liu Y, Wang Y Z, Fu H Y, et al. Open Architec- ture CNC Software Package and Key Technology [C]//Proceedings of the 2009 International Confer- ence on Information Technology and Computer Sci- ence. Kiev Ukraine, 2009 : 225-228.
[5]Hu T L, Zhang C R, Liu R L, et al. Design and Implementation of an Open CNC Core At the Shop Floor Level[J]. International Journal of Advanced Manufacturing Technology, 2009,40 : 541-552.
[6]Yu D, Hu Y,Xu X W, et al. An Open CNC Sys- tem Based on Component Technology[J]. IEEE Transactions on Automation Science and Engineer- ing, 2009,6(2) :302-310.
[7]Wei H X, Duan X M, Chen Y D,et al. Research of Open CNC System Based on CORBA[C]//Proceed- ings of the 2008 Fifth IEEE International Symposi- um on Embedded Computing. Beijing, 2008: 364-369.
[8]陶耀东[1,2],林浒[2].高性能开放式数控系统框架设计[J].小型微型计算机系统,2009(9):1911-1916.
[9]陈友东[1],陈五一[1],王田苗[1].基于组件的开放结构数控系统[J].机械工程学报,2006,42(6):188-192.
[10]董靖川[1],王太勇[1],徐跃[1].基于数控流水线技术的开放式数控系统[J].计算机集成制造系统,2009,15(6):1130-1139.
[11]李霞 [1],王永章 [2],梁宏斌 [2],钟力 [3].有限状态机在开放式数控系统中的应用[J].计算机集成制造系统,2005,11(3):428-432.
[12]杜少华[1,2],于东[2],胡毅[1,2],宋桃桃[1,2].组件技术在开放式控制系统中的研究[J].小型微型计算机系统,2009,30(4):623-627.
[13]李诚人[1].嵌入式开放型数控系统研究[J].计算机应用与软件,2008(1):227-229. |