Research on Drive Train Matching for a Series-parallel Hybrid Electric City Bus and Its Control Strategy

Abstract

Abstract:

Based on the drive train for series-parallel hybrid electric vehicle that can make more combination between engines, generators, motors and so

on,and the system can be ensured to work under the better conditions from the

structure.By matching and analyzing on the drive train for series-parallel hybrid electric

city bus,it is advanced that matching scheme and control strategy were proposed on drive train for series-parallel hybrid electric city bus,also,a sample bus was developed successfully.By the demonstration,it is indicated that the vehicle performance of drive and economy meets the design demands.The sample vehicle has better result in saving oil and can provide the reference for the scale demonstration.

Key words: series-parallel hybrid electric city bus, drive train, matching, control strategy

摘要：

混联式混合动力系统能够使发动机、发电机、电动机等部件间有更多的组合，并在结构上保证系统能在复杂的工况下工作在最优状态。通过对混联式混合动力城市客车动力系统的匹配和分析，提出了一种混联式动力系统的匹配方案和控制策略并成功开发出样车。示范运行结果表明，整车动力性及经济性满足设计要求，节油效果良好，可为规模化示

关键词: 范运行提供依据。混联式混合动力城市客车, 动力系统, 匹配, 控制策略

CLC Number:

U469.72

LEI Liang-Yo, ZHANG Pei-Pei, DIAO Da-Xu, LIU Jian-Jun.

Research on Drive Train Matching for a Series-parallel Hybrid Electric City Bus and Its Control Strategy

[J]. China Mechanical Engineering, 2011, 22(8): 984-988,993.

雷良育, 张培培, 赵大旭, 刘建军.

混联式混合动力城市客车动力系统的匹配及控制策略研究

[J]. 中国机械工程, 2011, 22(8): 984-988,993.

[1]	YANG Yixiao, SUN Dan, LAN Kexin, ZHAO Huan, FENG Yuzhong, ZHANG Jieyi, . Experimental Study of Matching of Brush Seal Friction Pairs Based on Frictional Heating Effects [J]. China Mechanical Engineering, 2024, 35(04): 636-645，690.
[2]	WANG Yu, WU Tingjia, LI Xiang, YU Xiongqing, . Matching Design of Distributed Propulsion Systems for Hydrogen-Lithium Batteries Powered Commuter Aircrafts [J]. China Mechanical Engineering, 2024, 35(01): 27-35.
[3]	WU Hanlin, WEI Peitang, CAI Lei, HU Rui, LIU Huaiju, DU Xuesong, ZHU Caichao, LIU Lang. Optimization of Planetary Roller Screw Tolerance Matching Based on Machining Error Sensitivity Analysis and Fuzzy Analytic Hierarchy Processes [J]. China Mechanical Engineering, 2022, 33(22): 2693-2703.
[4]	SHI Xiaobo, ZHAO Dingxuan, KONG Zhifei, NI Tao, ZHAO Xiaolong, GUO Qinghe. Vehicle High-precision Positioning Technique Based on Multi-sensors Information Fusion [J]. China Mechanical Engineering, 2022, 33(19): 2381-2387.
[5]	ZHU Jianxu, ZHAO Dingxuan, , GONG Mingde, CHEN Hao, , YANG Mengke, . Active Suspension System Energy Consumption and Engine Power Matching Control for Emergency Rescue Vehicles [J]. China Mechanical Engineering, 2022, 33(11): 1361-1368.
[6]	ZHANG Shengfang, WANG Guoqing, MA Fujian, LIU Yu, YANG Dapeng, SHA Zhihua. Automatic Recognition for Cavity Machining Features of Corner Box Parts Based on Improved Graph Matching#br# [J]. China Mechanical Engineering, 2022, 33(08): 921-928.
[7]	WU Fenghe, ZHANG Ning, LI Yuanxiang, ZHANG Huilong, GUO Baosu, . Compressed Sensing Method for Cutting Force Signals Based on Improved Gauss Random Measurement Matrix [J]. China Mechanical Engineering, 2021, 32(18): 2231-2238.
[8]	ZHANG Fengfeng, ZHANG Xin, CHEN Long, SUN Lining, ZHAN Wei. Binocular Camera Calibration Based on BP Neural Network Optimized by Improved Genetic Algorithm#br# [J]. China Mechanical Engineering, 2021, 32(12): 1423-1431.
[9]	DONG Zhibo, LU Weize, XIANG Jingyu, FANG Hongyuan. Design Method of Undermatching Butt Joints for ELC of Impact Resistance [J]. China Mechanical Engineering, 2021, 32(06): 729-733.
[10]	CHEN Xiaohui1;CHEN Haofeng2;CHEN Xu3. Shakedown Analysis of Elbow Pipes of Nuclear Power Plants under Cyclic Loading Based on LMM [J]. China Mechanical Engineering, 2019, 30(19): 2269-2275.
[11]	SHENG Jixin1;ZHANG Bangji1;ZHU Bo2;WANG Ming1;JIN Qiutan1. Parameter Optimization and Experimental Comparison of Two-speed Pure Electric Vehicle Transmission Systems [J]. China Mechanical Engineering, 2019, 30(07): 763-770,776.
[12]	ZHANG Wenhao1;LI Yongjian2，3;ZHANG Weihua1. Bearing Fault Diagnosis Based on K-SVD and HBW-OOMP [J]. China Mechanical Engineering, 2019, 30(04): 406-412.
[13]	CHI Maoru, CAI Wubin, LIANG Shulin, LI Yixiao, SUN Jianfeng, JIN Xuesong, HE Xiang. Influences of Rail Grinding Deviations on Vehicle Dynamics Performances of High Speed Railways [J]. China Mechanical Engineering, 2019, 30(03): 261-265,283.
[14]	ZHANG Hongxin;WANG Mingzhu;QIU Haoran;JIANG Jingang. 3D Reconstruction Method of Castings Based on Monocular Image Sequences [J]. China Mechanical Engineering, 2018, 29(23): 2799-2803,2814.
[15]	SONG Shouxu;QIU Quan;BU Jian;KE Qingdi. Design Method of Predecisional Remanufacturing Based on Life Matching Function [J]. China Mechanical Engineering, 2018, 29(17): 2094-2099.