Study on Parameter Design Based on Orthogonal Test and Support Vector Machine

China Mechanical Engineering ›› 2011, Vol. 22 ›› Issue (8): 971-975.

Previous Articles Next Articles

Study on Parameter Design Based on Orthogonal Test and Support Vector Machine

Sun Lin;Yang Shiyuan

Hefei University of Technology,Hefei,230009

Online:2011-04-25 Published:2011-05-04
Supported by:
National Natural Science Foundation of China（No. 70672096）

基于正交试验和支持向量机的参数设计方法研究

孙林;杨世元

合肥工业大学,合肥,230009

基金资助:
国家自然科学基金资助项目(70672096)；合肥工业大学科学研究发展基金资助项目(2010HGXJ0076)合肥工业大学博士专项科研基金资助项目(2010HGBZ0302)
National Natural Science Foundation of China（No. 70672096）

Abstract

Abstract:

In response to the defects of traditional parameter design method,the paper put forward an optimization design based on SVM and orthogonal

test.SVM intelligent model was established and the limited orthogonal test swatches

were studied, the precise relationship among each parameter and quality features of products as well as signal-to-noise ratio can be obtained,so as to guide the optimization design of technological parameter.

Key words: parameter design, support vector machine(SVM), orthogonal test, quality feature, signal-to-noise ratio

摘要：

针对传统参数设计方法存在的问题和不足,提出了一种基于支持向量机(SVM)和正交试验的参数设计方法。建立了SVM智能模型，并对有限正交试验样本进行了学习,得到了产品质量特征值及信噪比与各参数之间的精确关系，所得结果可用于指导工艺参数的优化设计。

关键词:

参数设计, 支持向量机, 正交试验, 质量特征值, 信噪比

CLC Number:

TB21

SUN Lin, YANG Shi-Yuan.

Study on Parameter Design Based on Orthogonal Test and Support Vector Machine

[J]. China Mechanical Engineering, 2011, 22(8): 971-975.

孙林, 杨世元.

基于正交试验和支持向量机的参数设计方法研究

[J]. 中国机械工程, 2011, 22(8): 971-975.

[1]	QI Maofu, SUN Yuantao, TIAN Chunlei, FENG Jiaqi. Shear Failure Mechanism Analysis and Optimum Design of 850 Ton Cold Shear Based on Orthogonal Test [J]. China Mechanical Engineering, 2024, 35(04): 752-759.
[2]	YUE Jianfeng, LONG Xinyu, HUANG Yunlong, GUO Jialong, LIU Wenji. On-line Identification of Narrow Gap P-GMAW Sidewall Fusion States Based on Arc Acoustic Signals [J]. China Mechanical Engineering, 2024, 35(02): 244-250，259.
[3]	ZHAO Zemin, WANG Lihua, HUANG Hongyi, CHEN Taimao, JIANG Wei. Effects of Dynamic Stabilization Operation Parameters on Ballast Stability [J]. China Mechanical Engineering, 2023, 34(19): 2313-2319，2369.
[4]	HU Bo, LUO Weitao, WANG Shaofei, LAN Xiwang. Quantitative Study on Magnetic Anomaly of Superalloy Surface Defects Based on Parameter Optimization of SVM [J]. China Mechanical Engineering, 2023, 34(17): 2058-2064.
[5]	XIANG Routong, WANG Shilong, ZHOU Jie, YI Lili. Study on Pressure Response Characteristics of New Pneumatic Position Sensor under Irradiation Environments [J]. China Mechanical Engineering, 2023, 34(11): 1364-1371.
[6]	CHEN Yupeng, WANG Haibo, XUE Chaojun, ZOU Huaijing, GAO Yimin, . Dynamics Simulation and Experimental Study of Industrial Assembly Anti-vibration Exoskeletons [J]. China Mechanical Engineering, 2023, 34(04): 404-413.
[7]	HOU Xiang, LIU Yixin, ZHONG Mengjie, LIN Sai, LIU Yang, LUO Ronghuang, LUO Xuetao, ZHANG Sa, . Research on Dry Etching Processes on PSSs [J]. China Mechanical Engineering, 2021, 32(24): 3001-3007.
[8]	WANG Qiang, CHEN Jigang, ZHAO Jianhua, LI Xue, HU Zhanqi, . Design of Inner Cone Roller Swaging Tool for Aviation Self-lubricating Spherical Plain Bearings [J]. China Mechanical Engineering, 2021, 32(20): 2501-2507,2519.
[9]	LI Xiangjie, ZHANG Xiangwen, . Recognition Method of Braking Intention of Electric Vehicles Based on ABC-SVM Algorithm [J]. China Mechanical Engineering, 2021, 32(17): 2125-2135.
[10]	YANG Yanling, YU Jing, LIN Ximeng, CAI Jinhui. Optimal Design of Contact Probes for Three-dimensional Thread Measuring Machines#br# [J]. China Mechanical Engineering, 2021, 32(15): 1812-1817.
[11]	WANG Jianxin, WU Yaowen, ZHANG Guangyi, CHAO Yang, ZHANG Wenwu, . Experimental Research of CFRP Cutting by Using Water Jet Guided Laser Processing#br# [J]. China Mechanical Engineering, 2021, 32(13): 1608-1616.
[12]	DING Jiaxin ;WANG Zhenya ;YAO Ligang ;CAI Yongwu. Rolling Bearing Fault Diagnosis Based on GCMWPE and Parameter Optimization SVM [J]. China Mechanical Engineering, 2021, 32(02): 147-155.
[13]	LIU Yuanming, WANG Zhenhua, WANG Tao, LIU Wenli, XIONG Xiaoyan. Data-driven Modeling and Intelligent Prediction Analysis for Hot Strip Outlet Crowns [J]. China Mechanical Engineering, 2020, 31(22): 2728-2733.
[14]	WANG Fubin1;PAN Xingchen1;SUN Yuge2;GUO Baojun3. Fuzzy Information Granulation for Casting Speed of Billets and Limited Weight Cutting Forecast Based on ELM [J]. China Mechanical Engineering, 2019, 30(24): 2968-2973.
[15]	XU Bo1,2;GAN Weimin1,2;HE Yafeng1,2;LI Wenjing3;WANG Xiangzhi1,2 . Cathode Design and Experimental Study of NC Electrochemical Boring Processes for Stepped Holes [J]. China Mechanical Engineering, 2019, 30(12): 1498-1506.

Study on Parameter Design Based on Orthogonal Test and Support Vector Machine

基于正交试验和支持向量机的参数设计方法研究

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics