Structure of Gecko Inspired Flexible Foot and Control System

China Mechanical Engineering ›› 2011, Vol. 22 ›› Issue (8): 897-900.

Previous Articles Next Articles

Structure of Gecko Inspired Flexible Foot and Control System

Li Bing1,2;Wang Xiaohua1;Yu Shulin1,2;Sun Shaoming3;Mei Tao1,3

1.Institute of Intelligent Machines,Chinese Acdemy of Sciences,Hefei,230031 

2.University of Science and Technology of China,Hefei,230026 

3.Institute of Advanced Manufacturing Technology,Changzhou,Jiangsu,213164

Online:2011-04-25 Published:2011-05-04
Supported by:

National Program on Key Basic Research Project (973 Program)（No. 2011CB302106）;
National Natural Science Foundation of China（No. 50905175）

仿壁虎柔性脚掌结构及控制系统的研究

李冰1,2;汪小华1;于树林1,2;孙少明3;梅涛1,3

1.中国科学院合肥智能机械研究所,合肥,230031

2.中国科学技术大学,合肥,230026

3.先进制造技术研究所,常州,213164

基金资助:
国家重点基础研究发展计划(973计划)资助项目(2011CB302106)；国家自然科学基金资助项目(50905175)
National Program on Key Basic Research Project (973 Program)（No. 2011CB302106）;
National Natural Science Foundation of China（No. 50905175）

Abstract

Abstract:

A compliant outward bend foot was designed, drawing inspiration from geckos, which used adhesion array to absorb. Mechanical analysis and computation were developed on the structure of this foot. The bionic flexible soles inspired foot’s motion was controlled by using servo motor actuators. Controlling the servo motor by using single chip microcomputer,thus the bend and flat of foot were controlled.Through experiments by physical platform, the validity and feasibility of design were verified.

Key words:

gecko inspired;flexible foot, servo motor, bend, flat

摘要：

采用仿壁虎微纳米黏附阵列材料,设计并研制了具有柔性的仿壁虎柔性脚掌。对该脚掌进行了力学分析与计算。仿壁虎柔性脚掌将伺服舵机作为脚掌外翻和展平的驱动器。由单片机对伺服舵机控制,以实现仿壁虎柔性脚掌的外翻和展平。通过实物样机试验，验证了设计的有效性和可行性。

关键词:

仿壁虎, 柔性脚掌, 伺服舵机, 外翻, 展平

CLC Number:

TP24

LI Bing, HONG Xiao-Hua, XU Shu-Lin, SUN Shao-Meng, MEI Chao.

Structure of Gecko Inspired Flexible Foot and Control System

[J]. China Mechanical Engineering, 2011, 22(8): 897-900.

李冰, 汪小华, 于树林, 孙少明, 梅涛.

仿壁虎柔性脚掌结构及控制系统的研究

[J]. 中国机械工程, 2011, 22(8): 897-900.

[1]	WU Zhongrui, CHEN Difa, WU Jizhan, YANG Yudian, LIU Huaiju. Study on Influences of Ni Content, Nitriding Hardening Depth, and Shot Peening on Bending Fatigue Performance of 42CrMo Gears [J]. China Mechanical Engineering, 2024, 35(03): 394-404.
[2]	YUAN Rongfu, WU Min, HU Zeqi, FENG Wei, WANG Rongcheng, XU Jin, . Analysis of Surface Gradient Decarburization in Automotive Front Axle Bending Based on n-Order Shear Deformation Theory [J]. China Mechanical Engineering, 2024, 35(03): 414-426.
[3]	GAO Song, SUN Yingli, LI Qihan, YING Liang, HAO Zhaopeng, ZHANG Bangcheng. Multi-point 3D Hot Stretch-Bending Process of Titanium Alloy Profiles and Their Microstructure Evolution [J]. China Mechanical Engineering, 2023, 34(24): 2986-2995,3014.
[4]	HAN Fei, SUN Weilong, ZHANG Ruoqing. Study on the Influences of Bending Methods on Springback in Roll Forming Processes [J]. China Mechanical Engineering, 2023, 34(19): 2353-2361.
[5]	YAN Dongdong, HU Yubo, LANG Lihui, QIN Chengwei, ZHANG Sanmin, LI Yong. Bending Load Monitoring and Positioning Method of Long-span Composite Structures [J]. China Mechanical Engineering, 2023, 34(18): 2257-2267.
[6]	QU Cong, MENG Zhijuan, ZHAO Liang, CHEN Yao, MA Lidong. Prediction of Five-point Bending Springback of Ti-6Al-4V Plates Based on Variable Elastic Modulus [J]. China Mechanical Engineering, 2022, 33(16): 1991-1999.
[7]	. Research on Rocking Head Type Piezoelectric Motor with Double Annual Plate for Canard Control [J]. China Mechanical Engineering, 2022, 33(14): 1654-1660.
[8]	ZHU Bin, LIU Wang, TIAN Feng, LIU Yong, ZHANG Yisheng, . Research on Hot Stamping-Joining Integrated Process Feasibility of High-strength Steel/CFRP and Sample Bending Performance [J]. China Mechanical Engineering, 2021, 32(24): 2975-2980.
[9]	MAO Tianyu, LIU Huaiju, WANG Baobin, HOU Shengwen, CHEN Difa. Analysis of Gear Bending Fatigue Test Based on Hierarchical Bayesian Model [J]. China Mechanical Engineering, 2021, 32(24): 3008-3015，3023.
[10]	LI Jiefeng, PAN Ronghua, YANG Zhongqing. Design and Tests of a Two-way SMA Bending Actuator [J]. China Mechanical Engineering, 2021, 32(19): 2305-2311，2320.
[11]	DUAN Yongchuan;QIAO Haidi;ZHANG Fangfang;LIU Yu;YANG Liu;GUAN Yingping. Dispersive Analysis and Accaracy Verification of Yield Strength Online Recognition [J]. China Mechanical Engineering, 2020, 31(23): 2864-2873.
[12]	CHEN Guangyao, LI Heng, HE Zirui, MA Jun, LI Guangjun, FU Ying. Effective Prediction and Compensation of Springbacks for Tube Bending Using Machine Learning Approach [J]. China Mechanical Engineering, 2020, 31(22): 2745-2752.
[13]	XU Yong, LI Ming, XIA Liangliang, ZHANG Shihong, . Hydro-mechanical Forming Process Combined with Multi-directional Local Loading for Special-shaped Exhaust Pipes [J]. China Mechanical Engineering, 2020, 31(22): 2763-2771.
[14]	JIANG Jingang1;CHEN Houjun1;MA Xuefeng1;ZHANG Yongde1;LIU Yi2. Forming Planning Method and Experimentation of Personalized Orthodontic Archwires [J]. China Mechanical Engineering, 2020, 31(11): 1323-1330,1336.
[15]	WEI Yunbo;ZHAO Danyang;WANG Minjie;LI Hongxia. Design and Mechanics Analysis of Biodegradable Polymer Vascular Stents with High Radial Supporting Property [J]. China Mechanical Engineering, 2020, 31(09): 1098-1107,1130.

Structure of Gecko Inspired Flexible Foot and Control System

仿壁虎柔性脚掌结构及控制系统的研究

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics