China Mechanical Engineering ›› 2010, Vol. 21 ›› Issue (1): 6-12.
Previous Articles Next Articles
Online:
2010-01-10
Published:
2010-01-22
Supported by:
基金资助:
CLC Number:
TIAN Fu-Xiang, TUN Hong-Chao, DIAO Da-Xu, SHAO Bing, WANG Chao-Qun, SHU Jian-Yang.
田富洋, 吴洪涛, 赵大旭, 邵兵, 王超群, 朱剑英.
[1]Chael Jang--Soo, Park Taw--Won, Kim J. Dynamic Analysis of a Flexible Multibody System[J]. International Journal of Precision Engineering and Manufacturing, 2005,6 (4) : 21-25. [2]Akin D L, Minsky M L, Thiel E D, et al. Space Applications of Automation, Robotics and Machine Intelligence Systems (ARAMIS) Phase II [R]. Washington D C: National Aerouautics and Space Administration, 1983. [3]Oda M. ETS--VII, Space Robot In--orbit Experiment Satellite[C]//1996 IEEE Int. Conf. on Robotics and Automation. Nagoya,Japan, 1996 : 739-744. [4]Sylla M, Asseke B. Dynamics of a Rotating Flexible and Symmetric Spacecraft Using Impedance Matrix in Terms of the Flexible Appendages Canti lever Modes [J]. Multibody System Dynamics, 2008,19: 345-364. [5]Pascal M. Some Open Problems in Dynamic Analysis of Flexible Multibody Systems [J]. Multibody System Dynamics,2001, 5:315-334. [6]Bathe K J, Ramm E, Wilson E L. Finite Elements Formulations for Large Deformation Dynamic Analysis[J]. International Journal for Numerical Methods in Engineering, 1995,9 : 353-386. [7]Carrera E M A. Serna Inverse Dynamics of Flexible Robots[J]. Mathematics and Computers in Simulation, 1996,41: 485-508. [8]Znamenacek J, Valasek M. An Efficient Implementation of the Recursive Approach to Flexible Multibody Dynamics[J]. Multibody System Dynamics, 1998,2: 227-252. [9]Hwang Yunn--Lin. Recursive Newton--Euler Formulation for Flexible Dynamic Manufacturing Anal ysis of Open--loop Robotic Systems[J]. Int. J Adv. Manuf. Technol. , 2006,29:598-604. [10]Jain A ,Rodriguez G. A Spatial Operator Algebra for Computation Multibody Dynamics[C]//International Conference on Scientific Computation and Differential Equations. Grado, Italy. 1997. [11]吴洪涛,熊有伦.机械工程中的多体系统动力学问题[J].中国机械工程,2000,11(6):608-611. [12]熊启家.基于空间算子代数理论的链式多体系统递推动力学研究 [D].南京航空航天大学,2003: [13]方喜峰[1],吴洪涛[2],刘云平[2],陆宇平[3],汪通悦[4].基于空间算子代数理论计算多体系统动力学建模[J].机械工程学报,2009,45(1):228-234. [14]Jain A,Rodriguez G. An Analysis of the Kinematics and Dynamics of Underactuated Manipulators [J]. IEEE Transactions on Robotics and Automa- tion, 1993,9(4):411-422. [15]Sohl A, Bobrow. E A Recursive Multibody Dynamics and Sensitivity Algorithm for Branched Kinematic Chains[J]. Journal of Dynamic Systems, Measurement, and Control,2001,23:391-399. [16]Jain A, Rodriguez G. Recursive Flexible Multibody System Dynamics Using Spatial Operators [J]. Journal of Guidance, Control and Dynamics, 1992,15.. 1453-1466. [17]翟婉明著.车辆 轨道耦合动力学[M],2007:400. |
[1] | WEN Zhiwei, LOU Junqiang, CHEN Tehuan, CUI Yuguo, WEI Yanding, LI Guoping. Vibration Mimicking Fish Body Wave and Flow Distribution of Underwater Flexible Structure with Resonant Actuation of Macro Fiber Composites [J]. China Mechanical Engineering, 2024, 35(03): 405-413. |
[2] | JIANG Jiguang, HOU Jue, SU Chengzhi, BA Qijiao, TIAN Aixin, XU Mingyu. Research on Optimal Pose Set Planning Method under Physical Constraint Robot Kinematics Calibration [J]. China Mechanical Engineering, 2024, 35(03): 472-480. |
[3] | DU Xu, CHANG Zexin, ZHENG Junqiang, REN Pengfei. A Real-time Tool Path Smoothing Algorithm Considering Joint Jerk Constraints [J]. China Mechanical Engineering, 2024, 35(02): 280-286. |
[4] | CHEN Zhuofan, ZHOU Kun, QIN Feifei, WANG Binrui. Inverse Kinematics Solution of Robots Based on IQPSO Algorithm [J]. China Mechanical Engineering, 2024, 35(02): 293-304. |
[5] | RONG Yu, CHEN Gang, DOU Tianci, . A Multi Index Comprehensive Optimal Anti Impact Trajectory Planning Method [J]. China Mechanical Engineering, 2024, 35(02): 305-316. |
[6] | WANG Weijun, YANG Guilin, DU Qinghao, CHEN Qingying, . Design of 3K Planetary Gear Reducers with No Backlash [J]. China Mechanical Engineering, 2024, 35(01): 36-44,55. |
[7] | YE Bosheng, JIN Xiongcheng, LI Han, SHAO Baiyan, LI Xiaokun, LI Siao. Robot Error Compensation Algorithm by Pseudo Target Iterative Generation [J]. China Mechanical Engineering, 2024, 35(01): 136-143. |
[8] | WANG Kaidi, CHEN Suifan, TANG Wei, QIN Kecheng, LI Qipeng, YANG Zhan, LIU Yang, ZOU Jun. A Bionic Bouncing Robot Design and Made Inspired by Locusts [J]. China Mechanical Engineering, 2023, 34(24): 2946-2951. |
[9] | TANG Yang, ZHANG Wudi, ZHANG Yulin, WANG Yuan, . Simulation and Experimental Study on Slip Bearing Performance and Pipe Wall Damage Characteristics of Pipeline Plugging Robots [J]. China Mechanical Engineering, 2023, 34(22): 2758-2771. |
[10] | XU Jilong, LIU Fucai, NIU Yunzhan. Design and Analysis of a Novel Weak-coupling Parallel Hip Exoskeleton with Large Angle of Rotation [J]. China Mechanical Engineering, 2023, 34(21): 2540-2547. |
[11] | XU Wan, CHENG Zhao, XIA Ruidong, CHEN Hancheng. An Adaptive Robust Unscented Kalman Filter Localization Algorithm Based on Dynamic Residual [J]. China Mechanical Engineering, 2023, 34(21): 2607-2614. |
[12] | CHENG Jibin, DAI Ning, GUO Pei, XIONG Jiyuan, YE Shiwei, CHENG Xiaosheng. Design Techniques of Soft Robot Arms Based on Mechanics Metamaterials [J]. China Mechanical Engineering, 2023, 34(16): 1900-1906. |
[13] | WU Chaoqun, ZHAO Song, LEI Ting. Robot Welding Trajectory Planning and High Frequency Control for Curved Seams [J]. China Mechanical Engineering, 2023, 34(14): 1723-1728. |
[14] | LI Jiaxuan, LI Lun, ZHOU Bo, ZHAO Jibin, ZHU Guang, WANG Zhengjia, . A Robotic Multi-directional Polishing Trajectory Generation Method Based on Preston-PSO Algorithm [J]. China Mechanical Engineering, 2023, 34(14): 1729-1740. |
[15] | SUN Luping, ZHANG Wenchang, WANG Zhihua, WANG Zhenwen, REN Zhimo, ZHANG Qian, . Measurement Method of Cabin Automatic Docking Based on 2D Laser Displacement Sensor [J]. China Mechanical Engineering, 2023, 34(09): 1120-1125,1133. |
Viewed | ||||||
Full text |
|
|||||
Abstract |
|
|||||