[1] 袁新安,李伟,殷晓康,等.基于ACFM的奥氏体不锈钢不规则裂纹可视化重构方法研究[J].机械工程学报,2020,56(10):27-33. YUAN Xin'an, LI Wei, YIN Xiaokang, et al. Visual Reconstruction of Irregular Crack in Austenitic Stainless Steel Based on ACFM Technique[J]. Journal of Mechanical Engineering, 2020, 56(10):27-33. [2] NAKAMURA N, ASHIDA K, TAKISHITA T, et al. Inspection of Stress Corrosion Cracking in Welded Stainless Steel Pipe Using Point-focusing Electromagnetic-Acoustic Transducer[J]. NDT&E International, 2016, 83(10):88-93. [3] 李伟,陈国明,齐玉良.交流电磁场裂纹检测反演算法研究[J].中国机械工程, 2007, 18(1):13-15. LI Wei, CHEN Guoming, QI Yuliang, et al. Study on the Inversion Algorithm of Crack-sizing Based on the Alternating Current Field Measurement[J]. China Mechanical Engineering, 2007, 18(1):13-15. [4] 武焕春,薛飞,李成涛,等.核电主管道不锈钢在高温高压水环境下的疲劳裂纹萌生行为[J].材料导报, 2018, 32(2):373-377. WU Huanchun, XUE Fei, LI Chengtao, et al. Fatigue Crack Initiation Behaviors of Nuclear Power Plant Main Pipe Stainless Steel in Water with High Temperature and High Pressure[J]. Materials Review,2018,32(2):373-377. [5] WU J B, SUN Y H, KANG Y H, et al. Theoretical Analyses of MFL Signal Affected by Discontinuity Orientation and Sensor-scanning Direction[J]. IEEE Transactions on Magnetics, 2015,51(1):6200207. [6] 李旺明,刘晴岩,张建华.奥氏体不锈钢管母材和焊缝的显微组织对超声检测的影响[J].理化检验,2015,51(1):22-26. LI Wangming, LIU Qingyan, ZHANG Jianhua. Effect of Microstructure of Parent Metal and Weld Metal of Austenitic Stainless Steel Pipe on Ultrasonic Testing[J]. Physical Testing and Chemical Analysis, 2015,51(1):22-26. [7] YUAN X A, LI W, CHEN G M, et al. Inspection of Both Inner and Outer Cracks in Aluminum Tubes Using Double Frequency Circumferential Current Field Testing Method[J]. Mechanical Systems and Signal Processing, 2019, 127(15):16-34. [8] 许鹏,曾泓茗,朱晨露,等.基于增强磁场涡流的高速轨道缺陷检测方法[J].中国机械工程, 2021,32(4):454-459. XU Peng, ZENG Hongming, ZHU Chenlu, et al. High Speed Track Defect Detection Methods Based on Enhanced Magnetic Field Eddy Currents[J]. China Mechanical Engineering, 2021,32(4):454-459. [9] ZHAO S X, SUN L S, GAO J Q, et al. Uniaxial ACFM Detection System for Metal Crack Size Estimation Using Magnetic Signature Waveform Analysis[J]. Measurement, 2020, 164:108090. [10] YUAN X A, LI W, CHEN G M, et al. Two-step Interpolation Algorithm for Measurement of Longitudinal Cracks on Pipe Strings Using Circumferential Current Field Testing System[J]. IEEE Transactions on Industrial Informatics, 2018, 14(2):394-402. [11] 王晓娜,胡杨,侯德鑫,等.基于方向调制原理的涡流热成像漆层下裂纹检测技术[J].仪器仪表学报, 2019,40(12):56-63. WANG Xiaona, HU Yang, HOU Dexin, et al. Eddy Current Thermography for under Paint Coating Crack Detection Based on Directional Modulation[J]. Chinese Journal of Scientific Instrument, 2019,40(12):56-63. [12] WANG Y, YE C F, WANG M L. Synthetic Magnetic Field Imaging with Triangle Excitation Coil for Inspection of Any Orientation Defect in Riveted Structure[J]. IEEE Transactions on Instrumentation and Measurement, 2020,69(2):533-541. [13] GE J H, LI W, CHEN G M, et al. Analysis of Signals for Inclined Crack Detection through Alternating Current Field Measurement with a U-shaped Probe[J].Insight, 2017, 59(3):121-128. [14] DOLABDJIAN C, WACH G, PEREZ L, et al. Improvement in the Detection of Subsurface Fatigue Cracks under Airframe Fasteners Using Improved Rotating Giant Magneto-resistance Magnetometer Head[J].Insight, 2007,49(3):133-136. [15] LI W, YUAN X A, CHEN G M, et al. High Sensitivity Rotating Alternating Current Field Measurement for Arbitrary-angle Underwater Cracks[J]. NDT and E International,2016,79:123-131. [16] YE C F,ROSELL A, HAQ M, et al. EC Probe with Orthogonal Excitation Coils and TMR Sensor for CFRP Inspection[J]. International Journal of Applied Electromagnetics and Mechanics,2019,59:1247-1255. [17] ZHANG N, YE C F, PENG L, et al. Eddy Current Probe with Three-phase Excitation and Integrated Array TMR Sensors[J]. IEEE Transactions on Industrial Electronics, 2020, 99:2989704. [18] BERNIERI A, FERRIGNO L, MARCO L, et al. Eddy Current Testing Probe Based on Double-coil Excitation and GMR Sensor[J]. IEEE Transactions on Instrumentation and Measurement, 2019, 68(5):1533-1542. [19] XU Z Y, WANG X, DENG Y M. Rotating Focused Field Eddy-current Sensing for Arbitrary Orientation Defects Detection in Carbon Steel[J]. Sensors, 2020,20(8):2345. [20] HAMIA R, CORDIER C, DOLABDJIAN C, et al. Eddy-current Non-destructive Testing System for the Determination of Crack Orientation[J]. NDT&E International, 2014,61:24-28. [21] MARESCHAL O, CORDIER C, DOLABDJIAN C, et al. Aluminum Alloy Sensitization Evaluation by Using Eddy Current Techniques Based on IGMR-magnetometer Head[J]. IEEE Transactions on Magnetics, 2019, 55(1):6200104. [22] LU M Y, MENG X B, HUANG R C, et al. Determination of Surface Crack Orientation Based on Thin-skin Regime Using Triple-coil Drive-pickup Eddy-current Sensor[J]. IEEE Transactions on Instrumentation and Measurement, 2020,70:6003509. [23] LIU X C, YANG J M, WU B, et al. A Novel Generation Method of Oscillatory Rotating Eddy Current for Crack Orientation Determination and Detection in Metal Plates[J]. NDT&E International, 2018, 97:1-10. [24] REPELIANTO A S, KASAI N, SEKINO K, et al. Flaw Detection in Aluminum Plates Using a Rotating Uniform Eddy Current Probe with Two Pairs of Excitation Coils[J]. Metals, 2019, 9(10):1069. [25] 张娜,彭磊,吴瑶,等.高分辨率TMR传感器阵列磁场成像涡流检测探头[J].仪器仪表学报, 2020,41(7):45-53. ZHANG Na, PENG Lei, WU Yao, et al. ECT Probe Based on Magnetic Field Imaging with a High Resolution TMR Sensor Array[J]. Chinese Journal of Scientific Instrument, 2020,41(7):45-53. [26] WU D H, LIU Z T, WANG X H, et al. Composite Magnetic Flux Leakage Detection Method for Pipelines Using Alternating Magnetic Field Excitation[J]. NDT&E International, 2017, 91:148-155. [27] SHEN J L, ZHOU L, ROWSHANDEL H, et al. Determining the Propagation Angle for Non-vertical Surface-breaking Cracks and Its Effect on Crack Sizing Using an ACFM Sensor[J]. Measurement Science&Technology, 2015, 26(11):115604. |