面向清洁生产的磨削工艺方案多层多目标优化模型及应用

doi:10.3969/j.issn.1004-132X.2022.05.008

摘要/Abstract

摘要： 为了实现磨削过程的节能减排，提出了一种面向清洁生产的磨削工艺方案多层多目标优化模型。从清洁生产“三流（物料流、能量流、环境排放流）”的角度建立了面向清洁生产的磨削能耗与碳排放模型。从工艺路线和工序工艺参数层建立了以磨削能耗、磨削碳排放和磨削时间为目标的多层多目标优化模型，采用基于层次分析法和客观赋权法(CRITIC)法组合赋权的改进遗传算法进行优化求解。以某轴承套圈为研究对象进行磨削工艺实验，结果表明：通过算法优化得到的加工方案相较于传统的加工方案，在工艺层面节约了6.48%的加工时间、降低了42.81%的能耗、减少了8.26%的碳排放；在工序层面缩短了25%的磨削时间、降低了18.84%的能耗、减少了8.69%的碳排放。结果验证了模型和方法的有效性。最后依据上述研究结果提出了相应的节能减排策略。

关键词: 磨削, 优化模型, 能耗, 碳排放, 清洁生产

Abstract: In order to effectively realize the energy saving and emission reduction of the grinding processes, a multi-layer and multi-objective optimization model of the grinding process plan for cleaner production was proposed. A model of grinding energy consumption and carbon emission was established from the perspective of “three streams (material flow, energy flow and environmental emission flow)” of cleaner production. A multi-layer and multi-objective optimization model targeting grinding energy consumption, grinding carbon emissions and grinding time was established from the routing levels and process parameter levels, and an improved genetic algorithm based on the combination of AHP(analytic hierarchy process) and CRITIC(criteria importance through intercriteria correlation) was proposed for optimization. The grinding processes of a certain bearing ring were tested and verified. Compared with the traditional processing plan, the optimization processing plan obtained through algorithm saves 6.48% machining time, 42.81% energy consumption, and 8.26% carbon emissions at the routing level; and saves 25% grinding time, 18.84% energy consumption and 8.69% carbon emissions at the process parameter level, which verifies the effectiveness of the model and method. Finally, corresponding energy-saving and emission-reduction strategies were proposed based on the above research.

Key words: grinding, optimization model, energy consumption, carbon emission, cleaner production

中图分类号:

TG580

吕黎曙, 邓朝晖, 刘涛, 万林林, . 面向清洁生产的磨削工艺方案多层多目标优化模型及应用[J]. 中国机械工程, 2022, 33(05): 589-599.

LYU Lishu, DENG Zhaohui , LIU Tao, WAN Linlin, . Multi-layer and Multi-objective Optimization Model and Applications of Grinding Process Plan for Cleaner Production[J]. China Mechanical Engineering, 2022, 33(05): 589-599.

参考文献

［1］HASANBEIGI A，PRICE L，FINO-CHEN C, et al. Retrospective and Prospective Decomposition Analysis of Chinese Manufacturing Energy Use and Policy Implications［J］. Energy Policy, 2013, 63(6)：562-574.
［2］曹华军, 李洪丞, 曾丹, 等. 绿色制造研究现状及未来发展策略［J］. 中国机械工程, 2020, 31(2)：135-144.
CAO Huajun, LI Hongcheng, ZENG Dan, et al. The State-of-art and Future Development Strategies of Green Manufacturing［J］. China Mechanical Engineering, 2020, 31(2)：135-144.
［3］郭登月, 程凯, 丁辉, 等. 无心磨削过程碳排放量及其关键影响因素解析［J］. 中国机械工程, 2014, 25(11)：1478-1485.
GUO Dengyue, CHENG Kai, DING Hui, et al. AnInvestigation on Quantitative Analysis of Carbon Footprint in Centreless Grinding Process and Its Key Factors［J］. China Mechanical Engineering, 2014, 25(11)：1478-1485.
［4］ZHOU L, LI J, LI F, et al. Energy Consumption Model and Energy Efficiency of Machine Tools：a Comprehensive Literature Review［J］. Journal of Cleaner Production, 2016, 112：3721-3734.
［5］李涛, 孔露露, 张洪潮, 等. 典型切削机床能耗模型的研究现状及发展趋势［J］. 机械工程学报, 2014, 50(7)：102-111.
LI Tao, KONG Lulu, ZHANG Hongchao, et al. Recent Research and Development of Typical Cutting Machine Tools Energy Consumption Models ［J］. Journal of Mechanical Engineering, 2014, 50(7)：102-111.
［6］HINDIYEH M, ALTALAFHA T, AL-NAERAT M, et al. Process Modification of Pharmaceutical Tablet Manufacturing Operations：an Eco-efficiency Approach［J］. Processes, 2018, 6：15.
［7］朱硕, 张华, 江志刚, 等. 基于DEVS的机械加工过程碳排放多粒度动态模型构建及仿真［J］. 机械工程学报, 2018, 54(19)：158-169.
ZHU Shuo, ZHANG Hua, JIANG Zhigang, et al. Multi-granularity Dynamic Model Establishment and Simulation of Carbon Emissions for Machining Process Based on DEVS［J］. Journal of Mechanical Engineering, 2018, 54(19)：158-169.
［8］RAMEZANIAN R, VALI-SIAR M M, JALALIAN M. Green Permutation Flowshop Scheduling Problem with Sequence-dependent Setup Times：a Case Study［J］. International Journal of Production Research, 2019, 57 (10)：3311-3333.
［9］ZHOU G, ZHANG C, LU F, et al. Integrated Optimization of Cutting Parameters and Tool Path for Cavity Milling Considering Carbon Emissions［J］. Journal of Cleaner Production, 2020, 250：119454.
［10］李聪波, 付松, 陈行政, 等. 面向高效节能的数控滚齿加工参数多目标优化模型［J］. 计算机集成制造系统, 2020, 26(3)：676-687.
LI Congbo, FU Song, CHEN Xingzheng, et al. Multi-objective CNC Gear Hobbing Parameters Optimization Model for High Efficiency and Energy Saving［J］. Computer Integrated Manufacturing System, 2020, 26(3)：676-687.
［11］李聪波, 李鹏宇, 刘飞, 等. 面向高效低碳的机械加工工艺路线多目标优化模型［J］. 机械工程学报, 2014, 50(17)：133-141.
LI Congbo, LI Pengyu, LIU Fei, et al. Multi-objective Machining Process Route Optimization Model for High Efficiency and Low Carbon［J］. Journal of Mechanical Engineering, 2014, 50(17)：133-141.
［12］倪恒欣, 阎春平, 陈建霖, 等. 高速干切滚齿工艺参数的多目标优化与决策方法［J］. 中国机械工程, 2021, 32(7)：832-838.
NI Hengxing, YAN Chunping, CHEN Jianling, et al. Multi-objective Optimization and Decision-making Method of High Speed Dry Gear Hobbing Processing Parameters［J］. China Mechanical Engineering, 2021, 32(7)：832-838.
［13］邓朝晖, 吕黎曙, 符亚辉, 等. 机床零部件生命周期碳排放评估与减排策略研究［J］. 机械工程学报, 2017, 53(11)：144-156.
DENG Zhaohui, LYU Lishu, FU Yahui, et al. Assessing Carbon Emission of Machine Tool Parts from Life Cycle Perspective and Emission Reduction Strategy Research［J］. Journal of Mechanical Engineering, 2017, 53(11)：144-156.
［14］刘飞. 机械加工系统能量特性及其应用［M］. 北京：机械工业出版社, 1995.
LIU Fei. Energy Characteristics of Machining System and Its Application ［M］. Beijing：Machinery Industry Press, 1995.
［15］ZHOU Y, TAN C. Research on Multi-source Energy Consumption Characteristics of CNC Machine Tool Processing System［J］. IOP Conference Series Materials Science and Engineering, 2018, 382：032065.
［16］JIA S, TANG R Z, LYU J X. Therblig-based Energy Demand Modeling Methodology of Machining Process to Support Intelligent Manufacturing［J］. Journal of Intelligent Manufacturing, 2014, 25：913-931.
［17］LI W, KARA S. An Empirical Model for Predicting Energy Consumption of Manufacturing Processes：a Case of Turning Process［J］. Proceedings of the Institution of Mechanical Engineers, Part B：Journal of Engineering Manufacture, 2011, 225(9)：1636-1646.
［18］NARITA H, KAWAMURA H, NORIHISA T, et al. Development of Prediction System for Environmental Burden for Machine Tool Operation［J］. Transactions of the Japan Society of Mechanical Engineers C, 2006, 72(4)：923-928.
［19］NARITA H, KAWAMURA H, CHEN L Y, et al. Development of Prediction System of Environmental Burden for Machine Tool Operation (2nd Report, Proposal of Evaluation Indicator for Eco-Efficiency) ［J］. Optics Letters, 2006, 71(704)：1392-1399.
［20］MALKIN B. Grinding Technology Theory and Application of Machining with Abrasives［M］. NewYork:Johnwiley and Sons, 1989.

[1]	王德祥, 赵齐亮, 张宇, 高腾, 江京亮, 刘国梁, 李长河, . 离子液体在微量润滑磨削界面的摩擦学机理研究[J]. 中国机械工程, 2022, 33(05): 560-568，606.
[2]	张志恒, 袁裕鹏, . 基于时空维度的长江主要类型船舶能耗建模及变化规律[J]. 中国机械工程, 2022, 33(04): 459-468.
[3]	焦瑀阳, 李丽, 聂华, 周丽, 陈行政, 李涛. 采用OPC统一架构的锻造车间能耗数据采集与监管系统[J]. 中国机械工程, 2021, 32(20): 2492-2500.
[4]	马玉豪, 李勇, 江磊, 丁国富. 断屑钻尖后刀面的砂轮磨削位姿算法[J]. 中国机械工程, 2021, 32(19): 2321-2325,2330.
[5]	丁凯, 李奇林, 雷卫宁, 徐铭洲, 王许. 单颗磨粒超声辅助磨削SiC陶瓷材料去除机理[J]. 中国机械工程, 2021, 32(19): 2331-2339.
[6]	任莹晖, 周家恒, 李伟, 周志雄, 李陈方. 化学机械磨削技术研究现状与展望[J]. 中国机械工程, 2021, 32(18): 2143-2152.
[7]	赫青山, 杨天标, 刘天立, 赵延军, 崔仲鸣. 磨料有序排布电镀砂轮的制备及其把持力研究[J]. 中国机械工程, 2021, 32(18): 2159-2164.
[8]	杨赫然, 何源, 孙兴伟, 董祉序, 乔赫廷. 螺杆转子砂带磨削装置开发及材料去除率预测[J]. 中国机械工程, 2021, 32(17): 2055-2062.
[9]	王利亭, 赵秀栩, 李娇. 蜗杆砂轮磨齿加工参数优化[J]. 中国机械工程, 2021, 32(17): 2136-2141.
[10]	吴柯, 陆新明, MEHMOOD Awais, 周立波, 袁巨龙. 基于固结磨粒的单晶蓝宝石自旋转磨削加工方法[J]. 中国机械工程, 2021, 32(16): 2002-2007，2015.
[11]	陈冰, 罗良, 焦浩文, 邓朝晖, 姚洪辉. 基于磨削痕迹仿真的磨削纹理生成机理[J]. 中国机械工程, 2021, 32(14): 1677-1685.
[12]	彭锐涛, 彭兴, 童佳威, 赵林峰, 陈美良, 贺湘波. 水基混合纳米流体对内冷却磨削性能的影响[J]. 中国机械工程, 2021, 32(13): 1591-1599.
[13]	尹龙, 赵波, 郭星晨, 赵重阳. 超声辅助内圆磨削40Cr15Mo2VN轴承套圈的试验研究#br#[J]. 中国机械工程, 2021, 32(10): 1172-1180.
[14]	刘艺繁, 阎春平, 倪恒欣, 牟云. 基于GABP和改进NSGA-Ⅱ的高速干切滚齿工艺参数多目标优化决策#br#[J]. 中国机械工程, 2021, 32(09): 1043-1050.
[15]	刘峰, 赵彦凯, 姚竞争, 王贺. 基于主体参数化分析的潜水器多学科优化[J]. 中国机械工程, 2021, 32(08): 997-1007.