[1]许仰曾.“工业4.0”下“液压4.0”与智能液压元件技术[J]. 流体传动与控制, 2016, 74(1):1-10.
XU Yangzeng. “Hydraulic 4.0” under “Industry 4.0” and Intelligent Hydraulic Component Technology[J]. Fluid Power Transmission and Control, 2016, 74(1):1-10.
[2]范世娟,杨超. 液压系统故障智能诊断技术与发展趋势[J].液压与气动, 2010(7):22-26.
FAN Shijuan,YANG Chao. Intelligent Fault Diagnosis Technology and Development Trend of Hydraulic System[J]. Chinese Hydraulics & Pneumatics, 2010(7):22-26.
[3]DU J, WANG S, ZHANG H. Layered Clustering Multi-fault Diagnosis for Hydraulic Piston Pump[J]. Mechanical Systems & Signal Processing, 2013, 36(2):487-504.
[4]何庆飞, 陈桂明, 陈小虎, 等. 基于改进灰色神经网络的液压泵寿命预测[J]. 中国机械工程, 2013, 24(4):500-506.
HE Qingfei,CHEN Guiming,CHEN Xiaohu,et al. Life Prediction of Hydraulic Pump Based on Improved GR-EY Neural Network[J]. China Mechanical Engineering, 2013, 24(4):500-506.
[5]董秋武, 汪宝生. 基于小波神经网络的液压泵故障类型识别[J]. 机床与液压, 2014, 42(11):177-180.
DONG Qiuwu,WANG Baosheng. Fault Type Identification of Hydraulic Pump Based on Wavelet Neural Network[J]. Machine Tool & Hydraulics, 2014, 42(11):177-180.
[6]MURALIDHARAN V, SUGUMARAN, V, SAKTHIVEL N R. Wavelet Decomposition and Support Vector Machine for Fault Diagnosis of Monoblock Centrifugal Pump[J]. International Journal of Data Analysis Techniques&Strategies,2011,3(2):159-177.
[7]刘思远,何跃,李晓明,等. 基于故障机理的液压泵多信息烈度特征状态评估方法[J].中国机械工程,2019,30(12):1460-1465.
LIU Siyuan, HE Yue,LI Xiaoming,et al. Multi-information Intensity Characteristic State Assessment Method of Hydraulic Pums Based on Fault Mechanism[J]. China Mechanical Engineering, 2019,30(12):1460-1465.
[8]胡纪滨, 周虎城, 魏超, 等. 滑靴副润滑油膜成膜特性的理论与试验研究[J]. 北京理工大学学报, 2015, 35(3):231-235.
HU Jibin, ZHOU Hucheng, WEI Chao, et al. Theoretical and Experimental Research on Film-forming Characteristics of Lubricating Film for Slipper Pairs[J]. Journal of Beijing Institute of Technology, 2015, 35(3):231-235.
[9]马纪明,申亚勇,李齐林.基于 CFD 的斜盘/滑靴副油膜特性分析[J]. 北京航空航天大学学报,2016,42(2):265-272.
MA Jiming,SHEN Yayong, LI Qilin. Analysis of Oil Film Characteristics of Swash Plate/Slipper Pair Based on CFD[J]. Journal of Beijing University of Aeronautics and Astronautics,2016,42(2):265-272.
[10]SCHENK A,IVANTYSYNOVA M.A Transient Thermo-elastohydrodynamic Lubrication Model for the Slipper/Swashplate in Axial Piston Machines[J].Journal of Tribology,2015,137(3):031701.
[11]HASHEMI S. Multibody Dynamics of Pivot Slipper Pad Thrust Bearing in Axialpiston Machines Incorporating Thermal Elastohydrodynamics and Mixed Lubrication Model[J]. Tribology International, 2016,96:57-76.
[12]CANBULUT F. The Experimental Analyses of the Effects of the Geometric and Working Parameters on the Circular Hydrostatic Thrust Bearings[J]. JSME International Journal,2005,48(4):715-722.
[13]徐兵, 李迎兵, 张斌,等. 轴向柱塞泵滑靴副倾覆现象数值分析[J]. 机械工程学报, 2010, 46(20):161-168.
XU Bing, LI Yingbing, ZHANG Bin, et al. Numerical Analysis of Overturning Phenomenon of Slipper Pair of Axial Piston Pump[J]. Journal of Mechanical Engineering, 2010, 46(20):161-168.
[14]袁成清. 机械系统磨损测试与评价[M]. 武汉: 武汉理工大学出版社, 2012.
YUAN Chengqing. Wear Testing and Evaluation of Mechanical Systems[M]. Wuhan: Wuhan University of Technology Press, 2012. |