基于STL模型的双面数控渐进成形干涉检查与修正

中国机械工程

基于STL模型的双面数控渐进成形干涉检查与修正

朱虎1;肖冬选1;姜在宽2

1.沈阳航空航天大学机电工程学院，沈阳，110136
2.庆南大学机械自动化工学部，昌原，51767

出版日期:2019-12-10 发布日期:2019-12-10
基金资助:
辽宁省自然科学基金资助项目(2014024011)

STL Model Based Interference Check and Correction in Double Sided CNC Incremental Forming

ZHU Hu1;XIAO Dongxuan1;KANG Jaeguan2

1.College of Mechanical and Electrical Engineering,Shenyang Aerospace University,Shenyang,110136
2.School of Mechanical and Automation Engineering,Kyungnam University,Changwon,51767

Online:2019-12-10 Published:2019-12-10

摘要/Abstract

摘要： 针对双面数控渐进成形中工具头与板材之间容易发生干涉的问题, 提出了基于STL模型的工具头与板材干涉检查与修正方法。对于主工具头，采用等距面生成无干涉的成形轨迹，以避免干涉；对于副工具头，将干涉类型分为工具头与板材非成形特征区的干涉和工具头与板材成形特征区的干涉两种类型，并通过判断副工具头刀位点与支撑面的位置关系来确定是否发生干涉。算法应用实例和成形实验结果表明，所提出的算法能够避免干涉，进而生成无干涉的工具头运动轨迹。

关键词: 双面数控渐进成形, 干涉检查, 干涉修正, STL模型

Abstract: For the problems of the interferences were easy to occur between the tool head and sheet metal in the double sided CNC incremental forming, a interference check and correction method was proposed based on the STL model. For the main tool head, the non-interference forming toolpath were generated to avoid the interference by using the equidistant surfaces. For the vice tool head, the interference types were divided into the interferences between the tool head and the areas of the forming characteristics and the interferences between the tool head and the areas of the non-forming characteristics. And the position relationship between the cutter location points of the vice tool head and the support surfaces was used to judge whether the interference occured. The case studies and the forming experimental results show that the interferences may be avoided and the interference free toolpaths of the tool head may be generated by using the proposed algorithm.

Key words: double sided CNC incremental forming, interference check, interference correction, STL model

中图分类号:

TG485

朱虎1;肖冬选1;姜在宽2. 基于STL模型的双面数控渐进成形干涉检查与修正[J]. 中国机械工程.

ZHU Hu1;XIAO Dongxuan1;KANG Jaeguan2. STL Model Based Interference Check and Correction in Double Sided CNC Incremental Forming[J]. China Mechanical Engineering.

参考文献

[1]LI Y L, CHEN X X, LIU Z B, et al. A Review on the Recent Development of Incremental Sheet-forming Process [J]. International Journal of Advanced Manufacturing Technology, 2017, 92(5/8): 2439-2462.
[2]BEHERA A K, SOUSA R A, INGARAO G, et al. Single Point Incremental Forming: an Assessment of the Progress and Technology Trends from 2005 to 2015[J]. Journal of Manufacturing Processes, 2017, 27: 37-62.
[3]MCANULTY T, JESWIET J, DOOLAN M. Formability in Single Point Incremental Forming: a Comparative Analysis of the State of the Art [J]. CIRP Journal of Manufacturing Science and Technology, 2017, 16: 43-54.
[4]LU B, FANG Y, XU D K, et al. Investigation of Material Deformation Mechanism in Double Side Incremental Sheet Forming [J]. International Journal of Machine Tools & Manufacture, 2015, 93: 37-48.
[5]MOSER N, PRITCHET D, REN H, et al. An Efficient and General Finite Element Model for Double-sided Incremental Forming [J]. Journal of Manufacturing Science & Engineering, 2016, 138(9): 091007.
[6]MEIER H, BUFF B, LAURISCHKAT R, et al. Increasing the Part Accuracy in Dieless Robot-based Incremental Sheet Metal Forming[J]. CIRP Annals—Manufacturing Technology, 2009, 58(1): 233-238.
[7]MOSER N, ZHANG Z, REN H, et al. Effective Forming Strategy for Double-sided Incremental Forming Considering In-plane Curvature and Tool Direction[J]. CIRP Annals—Manufacturing Technology, 2016, 65(1): 265-268.
[8]LINGAM R, SRIVASTAVA A, REDDY N V. Deflection Compensations for Tool Path to Enhance Accuracy during Double Sided Incremental Forming [J]. Journal of Manufacturing Science & Engineering, 2016, 138(9): 091008.
[9]LINGAM R, PRAKASH O, BELK J H, et al. Automatic Feature Recognition and Tool Path Strategies for Enhancing Accuracy in Double Sided Incremental Forming [J]. International Journal of Advanced Manufacturing Technology, 2017, 88(5/8): 1639-1655.
[10]朱虎, 杨晓光. 五轴数控渐进成形干涉检查与修正研究[J]. 机械工程学报, 2014, 50(7): 168-175.
ZHU Hu, YANG Xiaoguang. A Study on the Interference Detection and Correction in 5-Axis CNC Incremental Forming [J]. Journal of Mechanical Engineering, 2014, 50(7): 168-175.
[11]埃里克森. 实时碰撞检查算法技术[M].刘天慧,译. 北京：清华大学出版社, 2010.
ERICSON C. Real-time Collision Detection[M]. LIU Tianhui, Trans. Beijing: Tsinghua University Press, 2010.