[1]刘志东. 特种加工[M]. 北京: 北京大学出版社, 2013.
LIU Zhidong. Non-traditional Machining[M]. Beijing: Beijing University Press, 2013.
[2]KUNLEDA M, MIYOSHI Y, TAKAYA T, et al. High Speed 3D Milling by Dry EDM[J]. CIRP Annals: Manufacturing Technology, 2003, 52(1):147-150.
[3]汤传建,康小明,赵万生,等.液中喷气电火花加工试验研究[J] .电加工与模具,2008(3):16-20.
TANG Chuanjian, KANG Xiaoming, ZHAO Wansheng, et al. Research on the Processing of Jet EDM in Fluid [J]. Electromachining Mould, 2008(3):16-20.
[4]顾琳,赵万生,张志华,等. 喷雾电火花铣削加工及其机理的分析[J]. 电加工与模具,2006(2):1-4.
GU Lin, ZHAO Wansheng, ZHANG Zhihua, et al. Analysis of the Machining Process and Its Mechanism of Spray Spark Machining [J]. Electromachining Mould, 2006(2) :1-4.
[5]李磊,顾琳,赵万生.多孔内冲液集束电极电火花加工极间流场仿真及试验研究[J]. 电火花成形及微小孔加工技术,2009(3):167-173.
LI lei, GU Lin, ZHAO Wansheng. Simulation and Experimental Study of the Electrode Electric Spark Machining of the Porous Internal Jet Liquid Cluster Electrode [J]. Electric Spark Forming and Micro-hole Processing Technology, 2009(3):167-173.
[6]蒋毅,孔令蕾,金光远,等.多孔质电极电火花加工极间流场仿真[J]. 机床与液压,2016, 44(1): 147-151.
JIANG Yi, KONG Linglei, JIN Guangyuan, et al. Simulation of Flow Field between Eletrodes in Prorous-electrode of Electrical Discharge Machiniag[J]. Machine Tool & Hydraulics, 2016, 44(1): 147-151.
[7]THOE T B, ASPINWALL D K, KILLEY N. Combined Ultrasonic and Electrical Discharge Machining of Ceramic Coated Nickel Alloy[J]. Journal of Materials Processing Technology, 1999, 92/93:323-328.
[8]KREMER D, LEBRUN J L, HOSARI B,et al. Effects of Ultrasonic Vibrations on the Performances in EDM[J]. CIRP Annals Manufacturing Technology, 1989, 38(1):199-202.
[9]储召良.电极抬刀运动与电火花加工性能研究 [D].上海:上海交通大学, 2013.
CHU Zhaoliang. Research on the Performance of the Electrode Lifting Tool and Electrical Discharge Machining[D]. Shanghai:Shanghai Jiao Tong University, 2013.
[10]刘志东. 放电诱导可控烧蚀高效加工典型工艺方法[J]. 电加工与模具, 2012(1):1-6.
LIU Zhidong. Typical Process Method for the Efficient Machining of Controlled Ablation by Discharge Induction [J]. Electromachining Mould, 2012(1):1-6.
[11]LIU Zhidong, XU Anyang, QIU Mingbo, et al. Basic Study of Combustion-material Removal Process by Multi-function Electrode[J]. Procedia CIRP, 2013, 6:64-70.
[12]XU Anyang, LIU Zhidong, LI Wenpei, et al. Study of High-efficiency Electrical Discharge Machining-induced Ablation Machining of Titanium Alloy TC4 Using a Multi-function Electrode[J]. The International Journal of Advanced Manufacturing Technology,2014,72(1/4):377-385.
[13]LIU Zhidong, YIN Chunjing, CHENG Longhai, et al. Efficient Combined Machining of Electrospark-induced Controllable Combustion and Turning Dressing for TC4[J]. Materials & Manufacturing Processes, 2014, 29(5):614-620.
[14]CAO Zhongli, LIU Zhidong, WANG Xiangzhi, et al. Monopulse Electrical Discharge Machining Ablation Drilling Technology for Ti-6Al-4V Titanium Alloy[J]. The International Journal of Advanced Manufacturing Technology 2016, 86(1/4):539-546.
[15]CAO Zhongli, LIU Zhidong, LING Jiajian, et al. Deep-type Hole Machining by Inner Jetted Aerosol Dielectric Ablation[J]. The International Journal of Advanced Manufacturing Technology, 2015, 78 (9/12):1989-1998.
[16]KUMAR M M, NATARAJAN E . CFD Simulation for Two-phase Mixing in 2D Fluidized Bed[J]. International Journal of Advanced Manufacturing Technology, 2009, 45:1-4.
[17]李磊. 集束电极电火花加工性能研究[D]. 上海:上海交通大学,2011.
LI lei. Research on the Performance of Electric Spark Machining of Cluster Electrodes[D]. Shanghai:Shanghai Jiao Tong University, 2011.
[18]KOENIG W, WEILL R, WERTHEIM R, et al. The Flow Fields in the Working Gap with Electro-discharge-machining[J]. Annals of the CIRP, 1977,25(1):71-76. |