[1]宋如钢, 张宝欢, 杨延相. 新型摆线转子泵啮合特性的研究[J]. 粉末冶金技术, 2007, 25(2): 100-103.
SONG Rugang , ZHANG Baohuan , YANG Yanting.Study on the Meshing Characteristicd of a Novel Cycloidal Rotor Pump[J].Power Metallurgy Technology,2007,25(2):100-103.
[2]黄将兴, 李朝阳, 陈兵奎.二次包络摆线内啮合齿轮泵研究[J]. 机床与液压, 2010, 38(19):7-10.
HUANG Jiangxing, LI Zhaoyang, CHEN Bingkui.Study on Two Enveloping Cycloid Internal Meshing Gear Pump[J].Machine Tools and Hydraulic,2010,38(19):7-10.
[3]毛华永,李国祥,徐秀兰,等.摆线转子式齿轮泵的设计[J].粉末冶金技术,2003,21(5):282-286
MAO Huayong, LI Guoxiang, XU Xiulan, et al.Design of Cycloidal Rotor Gear Pump [J].Power Metallurgy Technology,2003,21(5):282-286.
[4]曾庆生,杨毅,王湘江.转子式机油泵多学科优化设计[J].内燃机工程,2009,30(5):73-77
ZENG Qingsheng, YANG Yi, WANG Xiangjiang.Multidisciplinary Design Optimization of Rotor Oil Pump [J].Internal Combustion Engine Engineering,2009,30(5):73-77.
[5]JUNG S Y, KIM M S, CHO H Y, et al. Development of an Automated Design System for Oil Pumps with Multiple Profiles (Circle, Ellipse, and Involute)[J]. J. Kor. Soc. Prec. Eng.,2009,26(3):103-112.
[6]JUNG S Y, HAN S M, CHO H Y, et al. Automated Design System for a Rotor with an Ellipse Lobe Profile[J]. Journal of Mechanical Science and Technology,2009,23(11):2928-2937.
[7]JUNG S Y, BAE J H, KIM M S, et al. Development of a New Gerotor for Oil Pumps with Multiple Profiles[J]. International Journal of Precision Engineering and Manufacturing,2011,12(5):835-841.
[8]CHOI T H, KIM M S, LEE G S, et al. Design of Rotor for Internal Gear Pump Using Cycloid and Circular-arc Curves[J]. Journal of Mechanical Design,2012,134(1):011005.
[9]BAE J H, KIM C. Design of Rotor Profile of Internal Gear Pump for Improving Fuel Efficiency[J]. International Journal of Precision Engineering and Manufacturing,2015,16(1):113-120.
[10]INAGUMA Y. Friction of Outer Rotor Affecting Friction Torque Characteristics in An internal Gear Pump[J]. Archive Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science 1989-1996,2015,229(16):3013-3026. |