转子式机油泵的椭圆与类椭圆齿廓修形方案分析

中国机械工程

转子式机油泵的椭圆与类椭圆齿廓修形方案分析

霍鹏光1;龚金科1;蔡皓2

1.湖南大学汽车车身先进设计制造国家重点实验室，长沙，410082
2.湖南省机油泵股份有限公司，衡东,421400

出版日期:2018-02-10 发布日期:2018-02-02
基金资助:
湖南省自然科学省市联合基金资助项目(12JJ9015)
The Joint Funds of Hunan Provincial Natural Science Foundation of China （No. 12JJ9015）

Analysis of Ellipse and Similar Ellipse Tooth Profile Modification Scheme of Rotor Oil Pump

HUO Pengguang1;GONG Jinke1;CAI Hao2

1.State Key Laboratory of Advanced Design and Manufacturing for Vehicle Body,Hunan University, Changsha,410082
2.Hunan Oil Pump Company, Hengdong, Hunan,421400

Online:2018-02-10 Published:2018-02-02
Supported by:
The Joint Funds of Hunan Provincial Natural Science Foundation of China （No. 12JJ9015）

摘要/Abstract

摘要： 针对当前椭圆齿廓转子机油泵存在的不足，设计了一种新型类椭圆齿廓转子，包括相互啮合的内转子和外转子。同时对椭圆和类椭圆修形后的机油泵进行了流量性能、液力矩以及多体动力学对比分析。应用类椭圆转子的机油泵可在不改变原有泵体设计的基础上进行改型，以减少改型的费用,同时在提高机油泵低速时流量的基础上，减小了内转子上由油液产生的扭矩，从而提高了转子泵的流量性能,降低了磨损并节省能源。

关键词: 机油泵, 转子, 修形方案, 类椭圆齿廓

Abstract: A new kind of similar elliptic rotor tooth profile was designed to solve the problems of current oil pumps with elliptical profile rotor, including the inner rotor and outer rotor meshing with each other. At the same time, the flow performance analysis, liquid moment analysis and multibody dynamics analysis were compared with elliptic profile and similar elliptic profile. Applications of oil pump with similar elliptical may reduce the costs of modifications without changing the original design of the pump bodies. It also may reduce torques generated by oil on inner rotors on the basis of improving the oil pump flows at low speeds. The similar elliptic profile improves the rotor pump flow performance and reduces abrasion and saves energy.

Key words: oil pump, rotor, modification scheme, similar elliptic tooth profile

中图分类号:

TK414.131

霍鹏光1;龚金科1;蔡皓2. 转子式机油泵的椭圆与类椭圆齿廓修形方案分析[J]. 中国机械工程.

HUO Pengguang1;GONG Jinke1;CAI Hao2. Analysis of Ellipse and Similar Ellipse Tooth Profile Modification Scheme of Rotor Oil Pump[J]. China Mechanical Engineering.

参考文献

[1]宋如钢, 张宝欢, 杨延相. 新型摆线转子泵啮合特性的研究[J]. 粉末冶金技术, 2007, 25(2): 100-103.
SONG Rugang , ZHANG Baohuan , YANG Yanting.Study on the Meshing Characteristicd of a Novel Cycloidal Rotor Pump[J].Power Metallurgy Technology,2007,25(2):100-103.
[2]黄将兴, 李朝阳, 陈兵奎.二次包络摆线内啮合齿轮泵研究[J]. 机床与液压, 2010, 38(19):7-10.
HUANG Jiangxing, LI Zhaoyang, CHEN Bingkui.Study on Two Enveloping Cycloid Internal Meshing Gear Pump[J].Machine Tools and Hydraulic,2010,38(19):7-10.
[3]毛华永,李国祥,徐秀兰,等.摆线转子式齿轮泵的设计[J].粉末冶金技术,2003,21(5):282-286
MAO Huayong, LI Guoxiang, XU Xiulan, et al.Design of Cycloidal Rotor Gear Pump [J].Power Metallurgy Technology,2003,21(5):282-286.
[4]曾庆生,杨毅,王湘江.转子式机油泵多学科优化设计[J].内燃机工程,2009,30(5):73-77
ZENG Qingsheng, YANG Yi, WANG Xiangjiang.Multidisciplinary Design Optimization of Rotor Oil Pump [J].Internal Combustion Engine Engineering,2009,30(5):73-77.
[5]JUNG S Y, KIM M S, CHO H Y, et al. Development of an Automated Design System for Oil Pumps with Multiple Profiles (Circle, Ellipse, and Involute)[J]. J. Kor. Soc. Prec. Eng.，2009,26(3):103-112.
[6]JUNG S Y, HAN S M, CHO H Y, et al. Automated Design System for a Rotor with an Ellipse Lobe Profile[J]. Journal of Mechanical Science and Technology,2009,23(11):2928-2937.
[7]JUNG S Y, BAE J H, KIM M S, et al. Development of a New Gerotor for Oil Pumps with Multiple Profiles[J]. International Journal of Precision Engineering and Manufacturing,2011,12(5):835-841.

[8]CHOI T H, KIM M S, LEE G S, et al. Design of Rotor for Internal Gear Pump Using Cycloid and Circular-arc Curves[J]. Journal of Mechanical Design,2012,134(1):011005.
[9]BAE J H, KIM C. Design of Rotor Profile of Internal Gear Pump for Improving Fuel Efficiency[J]. International Journal of Precision Engineering and Manufacturing,2015,16(1):113-120.
[10]INAGUMA Y. Friction of Outer Rotor Affecting Friction Torque Characteristics in An internal Gear Pump[J]. Archive Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science 1989-1996,2015,229(16):3013-3026.

[1]	李胜远, 郑龙席. 磁轴承激励下转子系统动力学特性[J]. 中国机械工程, 2021, 32(08): 901-907.
[2]	王龙凯, 王艾伦, 金淼, 尹伊君, . 含内阻的拉杆组合转子双稳态振动特性[J]. 中国机械工程, 2021, 32(05): 512-522,564.
[3]	陈冠峰1;陈松平1;蔡思捷2. 基于离散像素法的双螺杆压缩机螺杆转子间隙布置方法[J]. 中国机械工程, 2020, 31(24): 2937-2942，3023.
[4]	欧阳志高, 李坚, 吴立强, 艾兴, 章的. 薄壁机匣结构复杂冲击载荷与等效试验方法研究[J]. 中国机械工程, 2020, 31(14): 1754-1761.
[5]	刘洋;刘晓波;梁珊. 基于傅里叶分解方法的航空发动机转子故障诊断[J]. 中国机械工程, 2019, 30(18): 2156-2163.
[6]	王志永;杜伟涛. 螺旋锥齿轮铣齿机主轴\\|轴承系统的动力学分析[J]. 中国机械工程, 2019, 30(18): 2211-2216,2223.
[7]	王艾伦1，2;邓桂龙1，2;刘强1，2;李世杰1，2. 组合转子疲劳-蠕变联合损伤机理研究[J]. 中国机械工程, 2019, 30(10): 1156-1162.
[8]	韦为1,2;耿葵花1,2;耿爱农3;王少伟1;李辛沫3. 基于LuGre模型的转子压缩机滑片-滑槽运动副摩擦力测试[J]. 中国机械工程, 2019, 30(08): 932-938.
[9]	何谦1,2;王艾伦2;陈中祥1;杨俊1. 考虑结合面法向刚度的拉杆转子轴向振动特性[J]. 中国机械工程, 2018, 29(24): 2954-2958.
[10]	杨文军1，2;张锴锋1;王磊1，2;袁惠群3. 基于Kriging插值的失谐叶盘气动结构耦合振动特性分析[J]. 中国机械工程, 2018, 29(12): 1405-1413.
[11]	宜亚丽;豆林瑞;郭辉;金贺荣. 双相外激波摆杆活齿传动耦合刚度[J]. 中国机械工程, 2018, 29(06): 644-649.
[12]	潘勇1;王香耿1;程敏2,3;刘保国2. 考虑稳定性的非线性刚度转子系统振幅突变分叉集分析[J]. 中国机械工程, 2017, 28(20): 2441-2447.
[13]	张磊1;裴世源1;徐华1;张亚宾2;朱杰2. 摇摆工况下错位瓦轴承支撑的转子系统动力学特性[J]. 中国机械工程, 2017, 28(18): 2161-2170.
[14]	宾光富, 周伟, 王钢, 陈文. 基于附加约束的小型涡轮增压器转子模态测试[J]. 中国机械工程, 2017, 28(11): 1274-1278.
[15]	苏宇锋, 叶志通, 张坤. 抗磁悬浮石墨转子理论分析与实验[J]. 中国机械工程, 2017, 28(09): 1039-1043.