六面体单元在压印成形模拟中的应用

中国机械工程

六面体单元在压印成形模拟中的应用

易国锋1;李巧敏2;钟文2;柳玉起2

1.湖北工业大学机械工程学院，武汉， 430074
2.华中科技大学材料成形与模具技术国家重点实验室，武汉, 430074

出版日期:2017-08-10 发布日期:2017-08-07
基金资助:
国家自然科学基金资助项目(51275184)
National Natural Science Foundation of China （No. 51275184）

A Hexahedral Element Applied to Coining Simulations

YI Guofeng1;LI Qiaomin2;ZHONG Wen2;LIU Yuqi2

1.School of Mechanical Engineering, Hubei University of Technology, Wuhan, 430074
2.State Key Laboratory of Materials Processing and Die & Mould Technology, Huazhong University of Science and Technology, Wuhan, 430074

Online:2017-08-10 Published:2017-08-07
Supported by:
National Natural Science Foundation of China （No. 51275184）

摘要/Abstract

摘要： 针对动力显式压印成形模拟系统COINFORM中单点积分单元的沙漏问题，建立了一种采用多点积分方案的八节点六面体单元。推导了体积闭锁和剪切闭锁的产生机理，采用假设应变法，成功消除了单元在近似不可压缩变形中的体积闭锁和弯曲变形中的剪切闭锁。将建立的六面体单元与COINFORM相结合，对银999纪念币压印成形模拟算例进行了分析。研究结果表明，提出的多点积分六面体单元在压印模拟中不存在闭锁现象，且比COINFORM原有单元具有更高的计算精度。

关键词: 多点积分, 闭锁现象, 纪念币, 压印成形

Abstract: In order to overcome the hourglass problems of the one-point integrated element used in the dynamic explicit coining simulation system COINFORM, a new multi-point integrated 8-node hexahedral element was proposed herein. The generation mechanism of volume locking and shear locking was deduced. With the assumed strain method, the volumetric locking in near-incompressible deformations and the shear locking in bending situations were avoided. Combined with COINFORM, the proposed hexahedral element was applied to the coining simulation of a Ag999 commemorative coin. The results show that the locking phenomena of the multi-point integrated element are successfully avoided in the coining simulation, and the proposed element achieves higher computational accuracy than that of the existing element of COINFORM.

Key words: multi-point integration, locking phenomena, commemorative coin, coining

中图分类号:

易国锋1;李巧敏2;钟文2;柳玉起2. 六面体单元在压印成形模拟中的应用[J]. 中国机械工程.

YI Guofeng1;LI Qiaomin2;ZHONG Wen2;LIU Yuqi2. A Hexahedral Element Applied to Coining Simulations[J]. China Mechanical Engineering.

参考文献

[1]俞晓萍. 北京奥运会纪念币—从中国走向世界[J].中国金币,2008(9):13-14.
YU Xiaoping. Commemorative Coins for Beijing Olympic Games-from China to the world[J]. China Gold Coin,2008(9):13-14.
[2]钟文，柳玉起，许江平，等. 金银纪念币压印成形中的缺陷预测[J]. 中国机械工程,2012,23(1):109-112.
ZHONG Wen, LIU Yuqi, XU Jiangping, et al. Defect Prediction in Coining Process for Au-Ag Commemorative Coins[J]. China Mechanical Engineering,2012,23(1):109-112.
[3]BREKELMANS W A M, MULDERS L H G, RAMAEKERS J A H, et al. The Coining Process: analytical Simulations Evaluated[J]. CIRP Annals—Manufacturing Technology,1988,37(1):235-238.

[4]BUFFA G, FRATINI L, MICARI F. The Relevance of the Preform Design in Coining Processes of Cupronickel Alloy[C]//Proceedings of the 9th International Conference on Numerical Methods in Industrial Forming Processes. Oporto,2007:1005-1010.
[5]GUO K, WANG X, BELL R, et al. The Experimental Evaluation of Friction Conditions during a Silver Coining Process[J]. Steel Reesearch International,2008,79(2):80-87.
[6]GUO K. Development of Design Tools for Coining Process Using FEM[D]. Ottawa: Carleton University,2009.
[7]XU J P, LIU Y Q, LI S Q, et al. Fast Analysis System for Embossing Process Simulation of Commemorative Coin–COINFORM[J]. Comput. Model. Eng. Sci.,2008,38(3):201-216.
[8]BENZLEY S E, PERRY E, MERKLEY K, et al. A Comparison of All Hexagonal and All Tetrahedral Finite Element Meshes for Elastic and Elasto-plastic Analysis[C]//Proceedings, 4th International Meshing Roundtable. Albuquerque,1995:179-191.
[9]FLANAGAN D P, BELYTSCHKO T. A Uniform Strain Hexahedron and Quadrilateral with Orthogonal Hourglass Control[J]. International Journal for Numerical Methods in Engineering,1981,17(5): 679-706.
[10]HALLQUIST J O. LS-DYNA Theory Manual Theory Manual[M]. Livermore: Livermore Software Technology Corporation,2014.
[11]BELYTSCHKO T, BINDEMAN L P. Assumed Strain Stabilization of the Eight Node Hexahedral Element[J]. Computer Methods in Applied Mechanics and Engineering,1993,105(2):225-260.
[12]ZHU Y Y, CESCOTTO S. Unified and Mixed Formulation of the 8-node Hexahedral Elements by Assumed Strain Method[J]. Computer Methods in Applied Mechanics and Engineering,1996,129(1):177-209.
[13]LIU W K, GUO Y, TANG S, et al. A Multiple-quadrature Eight-node Hexahedral Finite Element for Large Deformation Elastoplastic Analysis[J]. Computer Methods in Applied Mechanics and Engineering,1998,154(1):69-132.
[14]WANG J, WAGONER R H. A Practical Large-strain Solid Finite Element for Sheet Forming[J]. International Journal for Numerical Methods in Engineering,2005,63(4):473-501.
[15]OOI E T, RAJENDRAN S, YEO J H, et al. A Mesh Distortion Tolerant 8-node Solid Element Based on the Partition of Unity Method with Inter-element Compatibility and Completeness Properties[J]. Finite Elements in Analysis and Design,2007,43(10):771-787.
[16]FREDRIKSSON M, OTTOSEN N S. Accurate Eight-node Hexahedral Element[J]. International Journal for Numerical Methods in Engineering,2007,72(6):631-657.

[17]ZIENKIEWICZ O C, TAYLOR R L, ZHU J Z. The Finite Element Method: Its Basis and Fundamentals[M]. Burlington: Elsevier Butterworth-Heinemann,2005:733-734.