数控机床工作台误差综合补偿方法研究

摘要/Abstract

摘要： 针对由几何误差与热误差引起的数控机床工作台与主轴之间相对位置变动的问题，通过试验分析其在不同温度状态下的误差数据，得到机床工作台平面度误差随热变形保持不变的规律，并提出了一种数控机床工作台平面度误差与主轴热误差的综合补偿方法。该方法通过分别建立工作台平面度误差模型和热误差模型，并运用叠加原理建立综合误差补偿模型，对传统固定单位置点建模补偿方法的原理性缺陷进行了改进。结合机床关键部件的实时温度值和刀具位置的实时坐标值，计算出了全工作台各区域各温度阶段的误差补偿值，进而实现了全工作台主轴轴向综合误差的实时补偿。检验及分析结果表明，相比于传统固定单位置点热误差建模补偿方法，该方法所建模型残余标准差减小约7μm，精度提高比例达到50%；单次最大补偿残差减小约11μm，精度提高比例达到60%，大幅度提高了机床的加工精度。

关键词: 数控机床工作台, 平面度误差模型, 热误差模型, 综合模型

Abstract: To avoid of the relative position problems changing between the worktable and the main spindle of any CNC machine because of geometric errors and thermal errors. The error data at different temperatures were obtained through experiments, the rules of the flatness errors on worktables were obtained remaining unchanged with the thermal deformation, and a kind of comprehensive compensation method of the flatness error and thermal error on worktables of CNC machine tool was proposed. In this method, the flatness error model and thermal error model were established separately, then the comprehensive error compensation model was established by using the superposition principle. The principle's defects of the traditional fixed point model compensation method were corrected. Based on the real-time temperature values of the key parts of CNC machine and the real-time coordinate values of the tool positions, the error compensation values of each stage of the whole working table were calculated. And then the real-time compensation of the overall axial errors of the spindle on the whole working table was realized. The accuracy of CNC machine are improved by using the proposed thermal error compensation method. Compared with the traditional single point thermal error compensation method, the standard deviation of the integrated model is reduced by about 7μm after analysis, and the accuracy ratio is up to 50%.The maximum compensation residual is reduced by about 11μm, the accuracy ratio of lift is up to 60%.

Key words: CNC machine worktable, flatness error model, thermal error model, combined error model.

中图分类号:

苗恩铭, 徐建国, 吕玄玄, 魏新园. 数控机床工作台误差综合补偿方法研究[J]. 中国机械工程.

MIAO Enming, XU Jianguo, LYU Xuanxuan, WEI Xinyuan. Study on Combined Error Compensation Method for CNC Machine Worktables[J]. China Mechanical Engineering.

参考文献

[1]BRYAN J B.International Status of Thermal Error Research［J］. Ann. CIRP，1990，39(2)：645-656.

[2]ARONSON R B.War Against Thermal Expansion［J］. Manuf. Eng.，1996，116(6)：45-50.

[3]YANG S，YUAN J，NI J .Accuracy Enhancement of a Horizontal Machining Center by Real-time Error Compensation［J］. Journal of Manufacturing Systems，1996，15(2)：113-124.

[4]MIAO Enming，GONG Yayun，NIU Pengcheng，et al.Robustness of Thermal Error Compensation Modeling Models of CNC Machine Tools[J]. International Journal of Manufacturing Technology，2013，69(9)：2593-2603.

[5]张成新，高峰，李艳.基于实时反馈的机床热误差在线补偿模型[J].中国机械工程， 2015,26(3):361-365.
ZHANG Chengxin， GAO Feng， LI Yan. On-line Compensation Model Based on Real-time Feedback Thermal Errors of Machine Tools[J]. China Mechanical Engineering，2015，26(3)：361-365.

[6]苗恩铭，刘义，杨思炫，等.无偏估计拆分算法在数控加工中心主轴热误差建模中的应用[J] .中国机械工程，2016，27(16)：2131-2136.
MIAO Enming， LIU Yi， YANG Sixuan， et al. Applications of Split Unbiased Estimation Algorithm in Thermal Error Modeling of CNC Machining Center[J]. China Mechanical Engineering，2016，27(16)：2131-2136.

[7]马军旭，赵万华，张根保.国产数控机床精度保持性分析及研究现状[J] .中国机械工程，2015，26(22)：3108-3115.
MA Junxu， ZHAO Wanhua， ZHANG Genbao. Research Status and Analyses on Accuracy Retentivity of Domestic CNC Machine Tools[J]. China Mechanical Engineering，2015，26(22)：3108-3115.

[8]刘焕牢，李曦，李斌，等.数控机床几何误差和误差补偿关键技术[J].机械工程师，2003(1)：16-18.
LIU Huanglao， LI Xi， LI Bin， et al. Measurement Methods and Key Technology of CNC Machine Tool Error Compensation[J]. Mechanical Engineer，2003(1)：16-18.

[9]王维，杨建国，姚晓栋，等.数控机床几何误差与热误差综合建模及其实时补偿[J].机械工程学报，2012，48(7)：165-170.
WANG Wei， YANG Jianguo， YAO Xiaodong， et al. Synthesis Modeling and Real-time Compensation of Geometric Error and Thermal Error for CNC Machine Tools[J]. Journal of Mechanical Engineering，2012，48(7)：165-170.

[10]苗恩铭，党连春,庄鑫栋,等.数控机床实切状态下热误差自动测量系统及其测量方法：中国，201510442587.6[P]. 2015-10-28.
MIAO Enming，DANG Lianchun，ZHUANG Xindong，et al．Automatic Measurement System and Method for Thermal Error of CNC Machine Tool in Real Cutting State：China，201510442587.6[P]．2015-10-28．
[11]MIAO Eenming， GONG Yayun， DANG Lianchun， et al. Temperature-sensitive Point Selection of Thermal Error Model of CNC Machining Center[J]. International Journal of Advanced Manufacturing Technology，2014，74(5/8)：681-691.

[12]罗尧治，公晓莺.基于双三次B样条插值的空间结构自由曲面[J].空间结构，2004，10(2)：30-34.
LUO Yaozhi， GONG Xiaoying. An Algorithm Based on Bicubic B-spline Surface Interpolation for Free Surface Design[J]. Spatial Structures，2004，10(2)：30-34.

[13]那日萨.三次B样条插值曲面及其实现[J]. 小型微型计算机系统，1995，16(3)：23-28.
NA Risa. Cubic B-spline Interpolation Surface and Its Realization[J]. Mini-micro Systems，1995，16(3)：23-28.

[14]王惠文，孟洁.多元线性回归的预测建模方法[J].北京航空航天大学学报，2007，33(4)：500-504.
WANG Huiwen， MENG Jie. Predictive Modeling on Multivariate Linear Regression [J]. Journal of Beijing University of Aeronautics and Astronautics，2007，33(4)：500-504.

[15]李二涛，张国煊，曾虹.基于最小二乘的曲面拟合算法研究[J].杭州电子科技大学学报，2009，29(2):48-51.
LI Ertao， ZHANG Guoxuan， ZENG Hong. Algorithm of Surface Fitting Research Based on Least-squares Methods[J]. Journal of Hangzhou Dianzi University，2009，29(2):48-51.

[16]姜辉，孙翰英，范嘉桢，等.基于FANUC 0i系统外部坐标原点偏移功能的数控机床误差补偿研究[J].机械制造，2009，47(7)：73-76.
JIANG Hui， SUN Hanying， FAN Jiazhen， et al. Research on Error Compensation of CNC Machine Tool Based on Excursion Function of External Coordinate Origin Point of FANUC 0i System[J]. Machinery，2009，47(7)：73-76.