功能梯度材料快速成形过程建模与控制

摘要/Abstract

摘要： 在三坐标雕刻机上开发出一种功能梯度材料增材制造装置，在低于水的凝固点温度下，将两种材料的水基膏体以一定比例进行挤出沉积，形成梯度材料零件。在该三维零件沉积成形过程中，配置好的材料不可避免地会存在结块和气泡现象,当结块分解或气泡释放时，会导致沉积过程中的挤压力不断变化，使得成形过程不稳定，成形零件质量差。在分析三维梯度材料沉积成形过程的干扰因素的基础上，通过实验建立了沉积过程中挤压力的动态模型，采用最小二乘方法进行系统辨识，完成了最小方差自适应挤压力控制器的设计，并用两种不同颜色的腻子粉（CaCO3）进行实验，验证了功能梯度材料快速沉积原理的可行性和控制器的有效性。

关键词: 梯度材料, 沉积, 挤压力, 自适应控制

Abstract: A new additive manufacturing equipment built on engraving machine was developed for the manufacture of FGM components, which extrudes two water-based materials in a certain proportion belowed the temperature of water solidification point. In the deposition processes of three-dimensional parts, the agglomeration and bubbles will inevitably exist in the configuration of the materials. When the release of the bubbles and the decomposition of agglomeration, the extrusion force of deposition processes was changed at any time , the deposition processes were unstable and the quality of deposited parts was hardly guaranteed. Analyzing the various process parameters and disturbances affected on the deposition processes of gradient material components, based on the plentiful experiments, this paper constructed the dynamic model of the deposition processes and the recursive least squares method was used to complete system identification. To test the feasibility of the FGM rapidly deposited and the validity of controller, two different colored Calcium carbonates(CaCO3) were tested.

Key words: functionally gradient material(FGM), deposition, extrusion force, adaptive control

中图分类号:

TH145.9

焦盼德, 李淑娟, 杨磊鹏, 闫存富. 功能梯度材料快速成形过程建模与控制[J]. 中国机械工程.

JIAO Pande, LI Shujuan, YANG Leipeng, YAN Cunfu. Modeling and Control of Rapid Deposition for Functionally Gradient Material Components[J]. China Mechanical Engineering.

参考文献

[1]刘华炜，刘学武，张广文.功能梯度材料制备工艺及研究进展[J].机械设计与制造，2012（4）:265-267.
LIU Huawei, LIU Xuewu, ZHANG Guangwen. Research Progress and Preparing Technology of Functionally Graded Material[J]. Machinery Design & Manufacture，2012(4):265-267.
[2]马涛，赵忠民,刘良祥,等.功能梯度材料的研究进展及应用前景[J]. 化工科技,2012,20(1):71-75.
MA Tao, ZHAO Zhongmin, LIU Liangxiang, et al. The Research Development and Future Application of Functionally Gradient Materials[J]. Science & Technology in Chemical Industry,2012,20(1):71-75.
[3]MARCUS H L, BEAMAN J J, BARLOW J W, et al. Solid Freeform Fabrication: Powder Processing[J]. American Ceramic Society Bulletin, 1990, 69(6):1030-1031.
[4]SUI G, LEU M C. Thermal Analysis of Ice Walls Built by Rapid Freeze Prototyping[J]. Journal of Manufacturing Science and Engineering, 2003, 125(4): 824-834.
[5]HUANG T S, MASON M S, HILMAS G E, et al. Freeze-form Extrusion Fabrication of Ceramic parts[J]. Virtual and Physical Prototyping, 2006, 1(2): 93-100.
[6]MASON M S, HUANG T S, LANDERS R G, et al. Freeform Extrusion of High Solids Loading Ceramic Slurries, Part I: Extrusion Process Modeling[C]//7th Annual Solid Freeform Fabrication Symposium. Rolla: University of Missouri, 2006:316-328.
[7]BRYANT F D, SUI G,LEU M C. A Study on Effects of Process Parameters in Rapid Freeze Prototyping[J]. Rapid Prototyping Journal, 2003, 9(1): 19-23.
[8]PRINZ F B, WEISS L E. Novel Applications and Implementations of Shape Deposition Manufacturing[J]. Naval Research Reviews, 1998, 50: 19-26.
[9]LEU M C, DEUSER B K, TANG L, et al. Freeze-form Extrusion Fabrication of Functionally Graded Materials[J]. CIRP Annals—Manufacturing Technology, 2012, 61:223-226.
[10]MASON M S, HUANG T S, LANDERS R G, et al. Aqueous-based Extrusion of High Solids Loading Ceramic Pastes: Process Modeling and Control[J]. Journal of Materials Processing Technology, 2009, 209(6): 2946-2957.
[11]COSTIN M H, TAYLOR P A, WRIGHT J D. On the Dynamics and Control of a Plasticating Extruder[J]. Polymer Engineering & Science, 1982, 22(17): 1095-1106.
[12]PREVIDI F, SAVARESI S M, PANAROTTO A. Design of a Feedback Control System for Real-time Control of Flow in a Single-screw Extruder[J]. Control Engineering Practice, 2006, 14(9): 1111-1121.
[13]HUANG T S, MASON M S, ZHAO X, et al. Aqueous-based Freeze-form Extrusion Fabrication of Alumina Components[J]. Rapid Prototyping Journal, 2009, 15(2): 88-95.
[14]李淑娟, 包惠同, 张恒. 三维陶瓷零件低温沉积过程挤压力建模及自适应控制[J]. 机械科学与技术, 2016(2):253-259.
LI Shujuan, BAO Huitong, ZHANG Heng. Modeling for Extrusion Force and Adaptive Control in the Freeze Deposition Process of Three Dimensional Ceramic Components[J]. Journal of Remote Sensing, 2016(2):253-259.
[15]韩曾晋.自适应控制[M].北京:清华大学出版社,1999:70-93.
HAN Zengjin. Adaptive Control[J]. Beijing: Tsinghua University Press, 1999: 70-93.
[16]方崇智,萧德云.过程辨识[M].北京:清华大学出版社,1988:159-197.
FANG Chongzhi, XIAO Deyun. Process Identification[M].Beijing: Tsinghua University Press, 1988:159-197.