[1]Siegwart R, Larsouneur R,Traxler A. Design and Performance of a High Speed Milling Spindle in Digital Controlled Active Magnetic Bearings[C]//Proceedings of the 2nd International Symposium on Magnetic Bearings. Tokyo, 1990:197-204.
[
2]Kimman M H,Langen H H, Schmidt R H. Milling Spindle with Active Magnetic Bearings [J]. Mechatronics, 2010,42(2):224-235.
[3]Siddhpura M, Paurobally R. A Review of Chatter Vibration Research in Turning [J]. International Journal of Machine Tools & Manufacture, 2012,61:27-47.
[4]Arnold R N. The Mechanism of Tool Vibration in Cutting of Steel [J]. Proc. Inst. Mech. Eng., 1946,154(1):261-284.
[5]Eynian M. Prediction of Vibration Frequencies in Milling Using Modified Nyquist Method [J]. CIRP Journal of Manufacturing Science and Technology, 2015, 32(67):123-132.
[6]Yang Y,Muoa J,Altintas Y. Optimization of Multiple Tuned Mass Dampers to Suppress Machine Tool Chatter[J]. International Journal of Machine Tools and Manufacture, 2010,50(9): 834-842.
[7]乔晓利,祝长生.基于内置力执行器的电主轴铣削颤振的主动控制[J].机械工程学报,2012,48(1):187-192.
Qiao Xiaoli, Zhu Changsheng. Active Control of Milling Chatter Based on the Built-in Force Actuator [J]. Journal of Mechanical Engineering,2012,48(1):187-192.
[8]蒋科坚.主动磁轴承-转子系统振动控制技术[D]. 杭州:浙江大学,2001.
[9]Wang Tongyue, He Ning, Li Liang. Vibration Model in Milling of Thin-walled Components [J]. Chinese Journal of Mechanical Engineering,2007,43(8):22-25.
[10]李忠群,刘强. 圆角铣削颤振稳定域建模与仿真研究[J]. 机械工程学报,2010,46(7);181-186.
Li Zhongqun,Liu Qiang. Modeling and Simulation of Chatter Stability for Circular Milling [J]. Journal of Mechanical Engineering, 2010, 46(7) :181-186.
[11]乔晓利,祝长生. 永磁型电主轴多频率振动的主动控制[J].中国机械工程,2014,25(2):162-168.
Qiao Xiaoli, Zhu Changsheng. An Active Multiple Frequency Vibration Control Scheme of Grinding Wheel in Permanent Magnet (PM) Electric Spindle Rotor System[J]. China Mechanical Engineering, 2014,25(2):162-168.
[12]杨建忠,李江威. 铣削加工过程稳定性分析[J]. 中国机械工程,2013,24(3):360-365.
Yang Jianzhong, Li Jiangwei. Analysis of Milling Process Stability[J]. China Mechanical Engineering, 2013,24(3):360-365.
|