[1]计时鸣, 许亚敏, 金明生, 等. 软固结磨粒气压砂轮的力学分析[J]. 中国机械工程, 2012,23(19):2366-2372.
Ji Shiming, Xu Yamin, Jin Mingsheng, et al. Mechanical Analysis of Pressure Grinding Wheel with Soft Abrasive Consolidation[J]. China Mechanical Engineering, 2012,23(19):2366-2372.
[2]许亚敏. 软固结磨粒气压砂轮的光整加工技术及实验研究[D]. 杭州: 浙江工业大学, 2011.
[3]张鹤腾. 气压砂轮光整加工振动稳定性研究[D].杭州: 浙江工业大学,2013.
[4]Walker D D, Brooks D, King A, et al. The “Precessions” Tooling for Polishing and Figuring Flat, Spherical and Aspheric Surfaces[J]. Optics Express, 2003, 11(8): 958-964.
[5]Walker D D, Brooks D, Freeman R, et al. New Developments in the Precessions Process for Manufacturing Freeform, Large-optical, and Precision Mechanical Surfaces[J]. SPIE, 2005, 6148: 51-60.
[6]高波, 谢大纲, 姚英学, 等. 气囊式工具抛光新技术[J]. 光学技术, 2004, 30(3): 333-335.
Gao Bo, Xie Dagang, Yao Yingxue, et al. New Technology of Ballonet Tool for Polishing[J]. Optical Technique, 2004, 30(3): 333-335.
[7]宋剑锋,姚英学,谢大纲, 等. 超精密气囊工具抛光方法的研究[J]. 华中科技大学学报(自然科学版), 2007, 35(S1): 104-107.
Song Jianfeng, Yao Yingxue, Xie Dagang, et al. Study on Ultra-precision Bonnet Tool Polishing Method[J]. Journal of Huazhong University of Science and Technology(Nature Science),2007, 35(S1): 104-107.
[8]计时鸣, 金明生, 张宪, 等. 应用于模具自由曲面的新型气囊抛光技术[J]. 机械工程学报, 2007, 43(8): 2-6.
Ji Shiming, Jin Mingsheng, Zhang Xian, et al.Novel Gasbag Polishing Technique for Free-form Mold[J]. Chinese Journal of Mechanical Engineering, 2007, 43(8): 2-6.
[9]金明生, 计时鸣, 张利, 等. 连续进动气囊抛光行间距优化及实验研究[J]. 中国机械工程, 2013,24(7):861-865.
Jin Mingsheng, Ji Shiming, Zhang Li, et al. Line Spacing Optimization and Experimental Research of Gasbag Polishing with Continuous Precession[J]. China Mechanical Engineering, 2013,24(7):861-865.
[10]张彦, 李军, 朱永伟,等. 双面抛光运动的数学建模及轨迹优化[J]. 光学技术, 2011, 37(3):279-283.
Zhang Yan, Li Jun, Zhu Yongwei, et al. Mathematical Modeling and Trajectory Optimization of Double-sided Polishing Process[J]. Optical Technique, 2011, 37(3):279-283.
[11]施春燕, 袁家虎, 伍凡,等. 运动轨迹对抛光误差的影响分析和轨迹优化研究[J]. 光学学报, 2011, 31(8):252-256.
Shi Chunyan, Yuan Jiahu, Wu Fan, et al. Analysis of Polishing Errors by Tool Paths and Optimization of Tool Paths[J]. Acta Optica Sinica, 2011, 31(8):252-256.
[12]陈国达,计时鸣,金明生,等. 面向等残余面形误差的分层修形模具气囊抛光轨迹规划方法[J]. 兵工学报, 2012, 33(6): 724-729.
Chen Guoda, Ji Shiming, Jin Mingsheng, et al. Layering Shaping Mould Gasbag Polishing Trajectory Planning Method for Equal Residual Figure Error[J]. Acta Armamentarii, 2012, 33(6): 724-729.
[13]金明生. 模具自由曲面气囊抛光机理及工艺研究[D]. 杭州:浙江工业大学,2009.
[14]罗作国. 切削颤振辨识及主动抑制策略的研究[D]. 武汉:华中科技大学,2007.
|