基于不等间距灰色模型的疲劳寿命预测方法

中国机械工程 ›› 2015, Vol. 26 ›› Issue (24): 3267-3274.

基于不等间距灰色模型的疲劳寿命预测方法

李国永1;谷正气1,2;张;沙1;马骁骙1;李吉平3;胡楷1

1.湖南大学汽车车身先进设计制造国家重点实验室,长沙,410082
2.湖南工业大学,株洲,412007
3.湘电重型装备股份有限公司,湘潭,411100

出版日期:2015-12-25 发布日期:2015-12-17
基金资助:
国家高技术研究发展计划(863计划)资助项目(2012AA041805)；中央财政支撑地方高校发展专项资金资助项目(0420036017)；湖南大学汽车车身先进设计与制造国家重点实验室自主课题资助项目(734215002)

Fatigue Life Prediction Method Based on Non-equidistant Grey Model

Li Guoyong1;Gu Zhengqi1,2;Zhang Sha1;Ma Xiaokui1;Li Jiping3;Hu Kai1

1.State Key Laboratory of Advanced Design and Manufacture for Vehicle Body,Hunan University,Changsha,410082
2.Hunan University of Technology,Zhuzhou,Hunan,412007
3.Xiangtan Electric Manufacturing Group Heavy-duty Equipment Co.，Ltd.,Xiangtan,Hunan,411100

Online:2015-12-25 Published:2015-12-17
Supported by:

摘要/Abstract

摘要：

运用不等间距灰色模型与传统Miner准则相结合的方法对结构件的疲劳寿命进行了预测。首先针对应力统计分级得出的相邻应力间距不相等的情况，构建了不等间距灰色模型，并用遗传算法优化不等间距灰色模型的背景值以保证模型的精度。其次运用不等间距灰色模型与Miner准则相结合，建立了疲劳寿命预测的灰色Miner方法。再次采用算例验证了不等间距灰色模型建模的精确性以及将不等间距灰色模型应用于疲劳寿命预测的合理性。最后将该方法应用到矿用自卸车A形架的疲劳寿命预测之中，不仅提高了A形架疲劳寿命的预测精度，而且证明了该方法对构件疲劳寿命预测的有效性。

关键词: 疲劳寿命预测, 不等间距, 灰色模型, A形架

Abstract:

Combining the non-equidistant grey model with traditional Miner rule, a method was proposed to predict the fatigue life of structural components. Firstly, in the case of non-equidistant stress grading statistics, non-equidistant grey model was constructed, and genetic algorithm was used to optimize the values of background value to ensure the accuracy. And, combining the non-equidistant grey model with Miner rule, grey Miner method was constructed to predict fatigue life. Then a numerical example proved the accuracy of non-equidistant grey model and the effectiveness of grey Miner method. Finally the method previously mentioned was applied to the fatigue life prediction of A-shape frame.The results show that it improves the accuracy of fatigue life prediction of A-shape frame and proves the effectiveness of the grey Miner method to predict fatigue life of components.

Key words: fatigue life prediction;non-equidistant;grey model;A-shape , frame

中图分类号:

O346.2
TD57

李国永, 谷正气, 张, 沙, 马骁骙, 李吉平, 胡楷. 基于不等间距灰色模型的疲劳寿命预测方法[J]. 中国机械工程, 2015, 26(24): 3267-3274.

Li Guoyong, Gu Zhengqi, Zhang Sha, Ma Xiaokui, Li Jiping, Hu Kai. Fatigue Life Prediction Method Based on Non-equidistant Grey Model[J]. China Mechanical Engineering, 2015, 26(24): 3267-3274.

参考文献

[1]Mi Chengji, Gu Zhengqi, Yang Qingquan, et al. Frame Fatigue Life Assessment of a Mining Dump Truck Based on Finite Element Method and Multibody Dynamic Analysis[J]. Engineering Failure Analysis,2012,23(4):18-26.
[2]贾星兰, 刘文珽. 谱载下基于模糊 Miner 法则的疲劳寿命估算[J]. 北京航空航天大学学报, 2003，29(3):218-220.
Jia Xinglan, Liu Wenting. Fatigue Life Estimation of Specimen under Spectrum Load Using Fuzzy Miner’s　Rule[J]. Journal of Beijing University of Aeronautics and Astronautics, 2003, 29(3): 218-220.
[3]王春生, 陈艾荣, 聂建国, 等. 既有铁路钢桥剩余疲劳寿命的概率性评估[J]. 计算力学学报, 2006,23(4):408-413.
Wang Chunsheng, Chen Airong, Nie Jianguo, et al. Probabilistic Assessment of Remaining Fatigue Life for Existing Railway Steel Bridges[J]. Chinese Journal of Computational Mechanics,2006,23(4):408-413.
[4]王旭亮, 聂宏. 基于模糊理论的疲劳寿命估算方法[J]. 中国机械工程,2008,19(17):2095-2097.
Wang Xuliang, Nie Hong. Fatigue Life Estimation Method Based on Fuzzy Theory[J]. China Mechanical Engineering, 2008, 19(17): 2095-2097.
[5]Akpan U O, Rushton P A, Koko T S. Development of a Fuzzy Probabilistic Methodology for Multiple-site Fatigue Damage[J]. Journal of Aircraft, 2004, 41(3):628-635.
[6]Prokopowicz P,Bednarek T,Sosnowski W.Fuzzy Numbers Calculations as Help in Fatigue Reliability Estimation[C]//Computer Science and Information Technology,International Multi-conference on. IEEE,2009: 99-104.
[7]童水光, 王相兵, 魏超, 等. 液压挖掘机臂杆结构疲劳寿命预测方法研究[J].中国机械工程,2014,25(16):2167-2172.
Tong Shuiguang, Wang Xiangbing, Wei Chao, et al. Research on Fatigue Life Prediction Method of for Arm Structure of Hydraulic Excavator[J]. China Mechanical Engineering, 2014, 25 (16): 2167-2172.
[8]王旭亮, 聂宏. 基于灰色系统 GM (1, 1) 模型的疲劳寿命预测方法[J]. 南京航空航天大学学报, 2008, 40(6): 845-848.
Wang Xuliang,Nie Hong.Prediction Method for Fatigue Life Based on Grey Model GM (1, 1)[J]. Journal of Nanjing University of Aeronautics & Astronautics, 2008, 40(6): 845-848.
[9]龙双丽, 聂宏, 王旭亮. 灰色模型在不确定性疲劳寿命预测中的研究[J]. 中国机械工程,2010,21(9):1093-1097.
Long Shuangli, Nie Hong, Wang Xuliang. Prediction Method for Fatigue Life Based on Grey Model [J]. China Mechanical Engineering, 2010, 21(9):1093-1097.
[10]徐东, 徐永成, 陈循, 等. 基于 EMD 的灰色模型的疲劳剩余寿命预测方法研究[J]. 振动工程学报, 2011, 24(1): 104-110.
Xu Dong, Xu Yongcheng, Chen Xun, et al. Residual Fatigue Life Prediction Based on Grey Model and EMD[J].Journal of Vibration Engineering, 2011,24(1): 104-110.
[11]徐进. 灰色系统建模理论在机床主轴疲劳寿命设计中的应用研究[J]. 机床与液压, 2003 (6): 229-231.
Xu Jin. Research of Grey System Modelling Theory in Machine Tool Axles’ Fatigue Span Design[J]. Machine Tool & Hydraulics, 2003 (6): 229-231.
[12]傅立. 灰色系统理论及其应用[M]. 北京：科学技术文献出版社, 1992.
[13]邓聚龙. 灰理论基础[M].武汉：华中科技大学出版社, 2002.
[14]肖新平, 王欢欢. GM (1, 1, α) 模型背景值的变化对相对误差的影响[J].系统工程理论与实践, 2014, 34(2): 408-415.
Xiao Xinping, Wang Huanhuan. Change of GM (1, 1, α) Model Background Value on the Influences of Relative Error[J]. Systems Engineering-Theory & Practice, 2014, 34(2): 408-415.
[15]周明, 孙树栋. 遗传算法原理及应用[M]. 北京: 国防工业出版社，2002.
[16]刘克格, 阎楚良, 张书明. 模糊数学在疲劳寿命估算中的应用[J]. 航空学报, 2006, 27(2): 227-231.
Liu Kege, Yan Chuliang, Zhang Shuming. Fatigue life Estimation for Using Fuzzy Mathematics[J]. Acta Aeronautica Et Astronautica Sinica, 2006, 27(2):227-231.
[17]郦明, 奥脱·布克斯鲍姆. 结构抗疲劳设计[M]. 北京: 机械工业出版社, 1987.
[18]Amzallag C, Gerey J P, Robert J L, et al. Standardization of the Rainflow Counting Method for Fatigue Analysis[J]. International Journal of Fatigue, 1994, 16(4): 287-293.