激光宽带熔覆光内送粉喷嘴研制

摘要/Abstract

摘要：

针对现有光外送粉宽带熔覆中金属粉末受热不均匀、光粉同轴耦合精度不高的问题，设计了一种光内送粉激光熔覆喷头。送粉装置位于激光熔覆喷头内部,四周被激光束包裹。为了实现在宽带激光束内部均匀地对熔池送粉,保证粉末受热均匀,粉末速度方向始终垂直于熔池,设计了一种分粉流道;应用FLUENT软件对粉束发散情况进行了数值分析,确定了出口粉管的间距尺寸;应用FLUENT软件对粉管内部流场进行分析,确定了装置内部分粉管路的尺寸,减少了出口处的紊流,达到了较佳的送粉效果。最后利用所研制的送粉装置进行了送粉实验,验证了其效果。

关键词: 激光宽带熔覆, 光内送粉, 送粉装置, 数值模拟

Abstract:

In order to improve the situation of the uneven heating of metal powder existing in the current outside-laser powder feeding broadband laser cladding nozzle and the low coaxial coupling accuracy, a inside-laser coaxial powder feeding broadband laser cladding nozzle was designed.The entire device was located inside the laser cladding nozzle,surrounded by laser beam,senting cladding powder to the laser molten pool.A flow channel was designed to realize the uniformity of inside-laser powder feeding and ensure the powder was heated evenly and the direction of the powder velocity was perpendicular to the molten pool throughout.FLUENT software was used to analyze the divergence of powder to determine the size of the export channel spacing and the internal flow field of powder channel to determine the size of the device partially channel so that the turbulence at the outlet could be reduced and the best results of powder feeding could be achieved.Finally,the powder feeding nozzle for powder feeding test was used to validate the experimental effects of powder feeding device.

Key words: broadband laser cladding, inside-laser powder feeding, powder feeding device, numerical simulation

中图分类号:

TG665

雷定中, 石世宏, 傅戈雁. 激光宽带熔覆光内送粉喷嘴研制[J]. 中国机械工程, 2015, 26(22): 3076-3081.

Lei Dingzhong, Shi Shihong, Fu Geyan. Research on Inside-laser Powder Feeding Nozzle for Broadband Laser Cladding[J]. China Mechanical Engineering, 2015, 26(22): 3076-3081.

参考文献

[1]宋建丽,李永堂,邓琦林,等.激光熔覆成形技术的研究进展[J].机械工程学报,2010,46(14):29-39.
Song Jianli,Li Yongtang,Deng Qilin,et al.Research Process of Laser Cladding Forming Technology[J].Journal of Mechanical Engineering, 2010,46(14):29-39.
[2]肖荣诗,王智勇,杨晓,等.同步送粉大功率激光表面宽带熔覆技术[J].应用激光,2000,20(3):115-116.
Xiao Rongshi,Wang Zhiyong,Yang Xiao,et al.Techniques for Wide Trace Cladding with High Power Lasers[J].Applied Laser, 2000, 20(3):115-116.
[3]杨森,钟敏霖,张庆茂,等.激光快速成型金属零件的新方法[J].激光技术,2001,25(4):254-257.
Yang Sen,Zhong Minlin,Zhang Qingmao,et al.New Technique to Rapidly Manufacture Metal Parts with Laser[J].Laser Technique, 2001, 25(4):254-257.
[4]史建军.激光宽带熔覆装置及工艺研究[D].苏州:苏州大学，2007.
[5]杨胶溪,左铁钏,徐文清,等.宽带激光熔覆制造高速线材硬质合金辊环术[J].应用激光,2006,26(6):369-371.
Yang Jiaoxi,Zuo Tiechuan,Xu Wenqing,et al.The Fabrication of High-speed Wire Rolls by Wide-strip Laser Cladding Cemented Carbide[J]. Applied Laser,2006,26(6):369-371.
[6]王智勇,陈虹,左铁钏.一种大功率激光加工用带式积分镜的设计[J].北京工业大学学报,2002,28(3):334-336.
Wan Zhiyong,Chen Hong,Zuo Tiechuan.Design of Strip Integral Mirror for High Power Laser Processing[J].Journal of Beijing University of Technology,2002,28(3):334-336.
[7]石皋莲,石世宏,吴少华,等.光内送粉激光熔覆快速成形粉末利用率实验研究[J].热加工工艺,2010,39(7):152-154.
Shi Gaolian,Shi Shihong,Wu Shaohua,et al.Research on Effective Utilization Rate of Power in Inside Laser Coaxial Powder Feeding Laser Cladding and Rapid Prototyping Process[J].Hot Working Technology,2010,39(7):152-154.
[8]石世宏,傅戈雁.激光加工成形制造光内送粉工艺与光内送粉喷头:中国,200610116413-1[P].2006-09-22.
[9]王维,才磊,杨光,等.激光熔覆同轴送粉喷嘴研制[J].中国激光,2012,39(4):0403003.
Wang Wei,Cai Lei,Yang Guang,et al.Research on the Coaxial Powder Feeding Nozzle for Laser Cladding[J].Chinese Journal of Lasers, 2012, 39(4):0403003.
[10]朱刚贤,李涤尘,张安峰,等.沉积层结构对同轴送粉喷嘴粉末流场的影响规律[J].中国激光,2010,37(6):1636-1642.
Zhu Gangxian,Li Dichen,Zhang Anfeng,et al.Influence of Deposited Layer’s Structure on Flow Field of Coaxial Powder Feeding Nozzle[J]. Chinese Journal of Lasers,2010,37(6):1636-1642.
[11]Wen S Y,Shin Y C,Murthy J Y,et al.Modeling of Coaxial Powder Flow for the Laser Direct Deposition Process[J].Int. J. Heat Transfer, 2009,52(25/26):5867-5877.
[12]董敢,刘继常,李媛媛.激光熔覆中同轴送粉气体-粉末流数值模拟[J].强激光与粒子束,2013,25(8):1951-1955.
Dong Gan,Liu Jichang,Li Yuanyuan.Numerical Simulation of Gas-powder Flow in Laser Cladding with Coaxial Powder Feeding[J].High Power Laser and Particle Beams,2013,25(8):1951-1955.
[13]Nan Yang.Concentration Model Based on Movement Model of Powder Flow in Coaxial Laser Cladding[J].Opt. & Laser Technol., 2009,41(1):94-98.
[14]Wang Xiaobing,Sun Bi,Cheng Yong,et al.Properties of Flattened Gausslan Beam in Directional Prism Cavity[J].Laser Technology,2002,26(2):117-119.
[15]赵维义,胡芳友,易德先.三通道激光熔覆同轴送粉喷嘴气体速度场试验[J].中国表面工程,2012,25(1):51-55.
Zhao Weiyi,Hu Fangyou,Yi Dexian.Experiment of Shielding Gas Flow Field on a Three Tunnels Coaxial Powder Feeding Nozzle[J]. China Surface Engineering,2012,25(1):51-55.
[16]韦俊尤,胡晓冬,姚建华.激光熔覆沸腾式送粉器气固两相流数值模拟研究[J].激光技术,2012,36(6):719-723.
Wei Junyou,Hu Xiaodong,Yao Jianhua.Numerical Simulation of Gas-solid Two-phase Flow in Fluidized Bed Based Powder for Laser Cladding[J]. Laser Technology,2012,36(6):719-723.