小型扭矩回差式两挡自动变速器

摘要/Abstract

摘要：

为了提高微型耕耘机等小型农业机械的自动化水平和操作舒适性，提出了一种根据作业阻力自动换挡的两挡自动变速器结构。换挡机构由摩擦离合器、超越离合器、端面凸轮和弹簧组成，无需电控和液压机构。采用扭矩式单参数回差换挡规律，降挡扭矩通过弹簧预压力进行调节，换挡回差主要由端面凸轮角度决定。换挡过程中动力不中断，离合器的接合压力保持恒定并传递稳定的扭矩，通过滑摩来逐渐达到转速同步，有利于降低换挡冲击。原理样机验证了变速器的自动换挡功能和换挡稳定性。

关键词: 微型耕耘机, 自动变速器, 换挡规律, 耕作阻力

Abstract:

To improve the level of automation and operation comfort of light-duty agriculture machines, such as micro-cultivator, a novel 2-speed automatic transmission structure was presented,which could shift according to tillage resistance automatically.The gearshift consisted of friction clutch, overrunning clutch,edge cam and springs, without hydraulic and electrical mechanism. Shift schedule was of single parameter backlash schedule of torque. Torque of down shift was adjusted by spring pre-load, and shift backlash was mainly decided by edge cam angle. During shifting process,torque was translated continuously and clutch pressure was constant to provide a steady torque.This characteristic is good for smoothing synchronization and reduces shifting shock. Prototype experiment was carried on,and the auto-shift function and stability was proved.

Key words: micro-cultivator, automatic transmission, shift schedule, tillage resistance

中图分类号:

S222.3

郝允志, 陈建, 薛荣生, 周黔. 小型扭矩回差式两挡自动变速器[J]. 中国机械工程, 2015, 26(16): 2249-2253.

Hao Yunzhi, Chen Jian, Xue Rongsheng, Zhou Qian. Light-Duty 2-Speed Automatic Transmission with Torque Backlash Shift Schedule[J]. China Mechanical Engineering, 2015, 26(16): 2249-2253.

参考文献

[1]Moitzi G, Haas M, Wagentristl H, et al. Energy Consumption in Cultivating and Ploughing with Traction Improvement System and Consideration of the Rear Furrow Wheel-load in Ploughing[J]. Soil & Tillage Research, 2013, 134: 56-60.
[2]Matin M A, Fielke J M, Desbiolles J M A. Furrow Parameters in Rotary Strip-tillage: Effect of Blade Geometry and Rotary Speed[J]. Biosystems Engineering, 2014, 118: 7-15.
[3]车刚, 张伟, 万霖, 等. 基于灭茬圆盘驱动旋耕刀多功能耕整机设计与试验[J]. 农业工程学报, 2012, 28(20): 34-40.
Che Gang, Zhang Wei, Wan Lin, et al. Design and Experiment of Multifunctional Tillage Machine with Driven Bent Blade by Stubble Ploughing Disk[J]. Transactions of the Chinese Society of Agricultural Engineering, 2012, 28(20): 34-40.
[4]朱思洪, 朱永刚, 朱星星, 等. 大型拖拉机动力换挡变速箱试验台[J]. 农业机械学报, 2011, 42(4): 13-16,38.
Zhu Sihong, Zhu Yonggang, Zhu Xingxing, et al. Test-bed of Power Shift Transmission for Large-scale Tractor[J]. Transactions of the Chinese Society for Agricultural Machinery, 2011, 42(4): 13-16,38.
[5]杨有刚, 张宏, 冯涛, 等. 土壤浅深松联合松耕机设计和浅松土试验[J]. 机械工程学报, 2012, 48(19): 163-168.
Yang Yougang, Zhang Hong, Feng Tao, et al. Topsoil and Subsoil Combined Cultivator and Top-soiling Experiment[J]. Journal of Mechanical Engineering, 2012, 48(19): 163-168.
[6]Owsiak Z. Wear of Spring Tine Cultivator Points in Sandy Loam and Light Clay Soils in Southern Poland[J]. Soil & Tillage Research, 1999, 50: 333-340.
[7]王元杰, 刘永成, 杨福增, 等. 温室微型遥控电动拖拉机的研制与试验[J]. 农业工程学报, 2012, 28(22): 23-29.
Wang Yuanjie, Liu Yongcheng, Yang Fuzeng, et al. Development and Test of Tiny Remotely Controlled Electric Tractor for Greenhouses[J]. Transactions of the Chinese Society of Agricultural Engineering, 2012, 28(22): 23-29.
[8]Kolatora B, Bialobrzewskib I. A Simulation Model of 2WD Tractor Performance[J]. Computers and Electronics in Agriculture, 2011, 76: 231-239.
[9]Astrand B, Baerveldt A J. A Vision Based Row-following System for Agricultural Field Machinery[J]. Mechatronics, 2005, 15: 251-269.
[10]Cordill C, Grift T E. Design and Testing of an Intra-row Mechanical Weeding Machine for Corn[J]. Biosystems Engineering, 2011, 110: 247-252.
[11]Chaturvedi V, Kumar A, Singh J K. Power Tiller: Vibration Magnitudes and Intervention Development for Vibration Reduction[J]. Applied Ergonomics, 2012, 43: 891-901.
[12]Sahu R K, Raheman H. Adecision Support System on Matching and Field Performance Prediction of Tractor-implement System [J]. Computers and Electronics in Agriculture, 2008, 60: 76-86.
[13]Marakoglu T, Carman K. Fuzzy Knowledge-based Model for Prediction of Soil Loosening and Draft Efficiency in Tillage[J]. Journal of Terramechanics, 2010, 47: 173-178.

[1]	李聪波;张弛;屈世阳;胡曾明. 考虑道路坡度与车辆载重的纯电动物流车综合性能换挡规律[J]. 中国机械工程, 2021, 32(03): 275-283,289.
[2]	陈慧涛;常思勤;范爱民. 采用电磁驱动配气机构的汽油机换挡过程控制[J]. 中国机械工程, 2018, 29(17): 2017-2022.
[3]	李聪波, 陈睿杰, 李月, 单亚帅. [电动汽车稳定性控制]面向低能耗的纯电动汽车两挡变速系统综合换挡规律[J]. 中国机械工程, 2018, 29(15): 1818-1825,1839.
[4]	周英超1;常思勤1;李波2. 电控机械式自动变速器时序重叠换挡系统设计与研究[J]. 中国机械工程, 2018, 29(11): 1289-1296.
[5]	李昊, 刘建霞, . 基于车辆负荷系数的矿用车AT动力换挡策略[J]. 中国机械工程, 2016, 27(11): 1530-1534,1540.
[6]	何雄, 张农, 孔国玲. 基于动态滑模算法的AMT选换挡电机控制[J]. 中国机械工程, 2016, 27(10): 1414-1419.
[7]	秦大同1;龙海威1;胡明辉1;叶心2. AMT中度混合动力汽车经济性换挡规律研究[J]. 中国机械工程, 2013, 24(20): 2820-2825.
[8]	陈淑江;秦大同;胡明辉;胡建军. 兼顾动力性与经济性的纯电动汽车AMT综合换挡策略[J]. 中国机械工程, 2013, 24(19): 2687-2692.
[9]	孙冬野;王聪. 发动机负扭矩工况下的DCT传动系统换挡控制策略[J]. 中国机械工程, 2013, 24(19): 2692-2697.
[10]	林树森, 常思勤, 李波. 应用二自由度电磁执行器的AMT换挡分段控制[J]. 中国机械工程, 2013, 24(15): 2076-2080,2087.
[11]	赵治国, 王琪, 刁威振, 陈海军. 双离合器变速汽车坡道模糊修正换挡研究[J]. 中国机械工程, 2013, 24(15): 2122-2129.
[12]	邹喜红1, 谯凯1, 石晓辉1, 余勇2, 易鹏2. 基于远程参数控制的DCT关键零部件道路模拟试验[J]. 中国机械工程, 2013, 24(11): 1537-1541.
[13]	赵治国, 仇江海. DCT车辆起步及换挡过程双离合器H∞鲁棒控制[J]. 中国机械工程, 2012, 23(6): 745-750.
[14]	尤明福1, 李志伟2, 甘伟2, 高奇峰2. 基于杠杆法的8速自动变速器传动方案的设计[J]. 中国机械工程, 2012, 23(23): 2801-2804.
[15]	何宁, 赵治国, 李瑜婷. 双离合器自动变速器换挡规律及其仿真评价 [J]. 中国机械工程, 2011, 22(3): 367-373.