一种过约束并联机构受力的数值仿真分析方法

中国机械工程 ›› 2015, Vol. 26 ›› Issue (12): 1576-1583.

一种过约束并联机构受力的数值仿真分析方法

赵永生1,2;刘文兰1;许允斗1,2;姚建涛1,2;金林茹1，3

1.燕山大学河北省并联机器人与机电系统实验室,秦皇岛,066004
2.燕山大学先进锻压成型技术与科学教育部重点实验室,秦皇岛,066004
3.北京机电院机床有限公司,北京，100027

出版日期:2015-06-25 发布日期:2015-06-29
基金资助:
国家自然科学基金资助项目(51275439)；国家重点基础研究发展计划（973计划)资助项目(2013CB733000);河北省自然科学基金资助项目(E2014203255)
National Natural Science Foundation of China（No. 51275439）;

National Program on Key Basic Research Project (973 Program)（No. 2013CB733000）;
Hebei Provincial Natural Science Foundation of China（No. E2014203255）

A Numerical Simulation Method for Force Analysis of an Overconstrained PM

Zhao Yongsheng1,2;Liu Wenlan1;Xu Yundou1,2;Yao Jiantao1，2;Jin　 Linru1,3

1.Parallel Robot and Mechatronic System Laboratory of Hebei Province,Yanshan University,Qinhuangdao,Hebei,066004
2.Key Laboratory of Advanced Forging & Stamping Technology and Science of Ministry of National Education,Yanshan University,Qinhuangdao,Hebei,066004
3.BMEIMT Co., Ltd., Beijing,100027

Online:2015-06-25 Published:2015-06-29
Supported by:

National Natural Science Foundation of China（No. 51275439）;

National Program on Key Basic Research Project (973 Program)（No. 2013CB733000）;
Hebei Provincial Natural Science Foundation of China（No. E2014203255）

摘要/Abstract

摘要：

鉴于目前对过约束并联机构进行受力仿真分析的研究非常少，提出了一种对该类机构受力的数值仿真分析方法。将机构的动平台、定平台及所有运动副视作刚体，将易产生空间复合弹性变形的分支杆视为柔性体，用虚拟关节代替外形复杂的运动副模型，结合三维建模软件、ANSYS软件及ADAMS软件建立与理论模型完全一致的刚柔混合模型；仅改变驱动量使机构运动到指定位形，便能实现对机构在任意位形下的受力分析，避免了对机构的不同位形重建模型。采用该方法对三种类型的过约束并联机构进行了受力分析，分析结果验证了该方法的正确性，同时也表明该方法具有一定的通用性，且无需复杂的理论计算，便能获得过约束并联机构在任意位形下的驱动力和各关节约束反力大小，为此类机构的受力分析提供了便捷途径。

关键词: 过约束并联机构, 数值仿真, 受力分析, 刚柔混合模型

Abstract:

A numerical simulation method for force analysis of the overconstrained PM was proposed,in view of the fact that very few literatures had focused on the force simulation analysis of this type of mechanism at present.The rigid-flexible mixed model of the overconstrained PM was established combining the 3D modeling software,the ADAMS software and ANSYS software,which was idendical with the theoretical one completely.The base,moving platform and kinematic joints were built as rigid bodies,while the links easy to produce spatial composite elastic deformations were built as flexible bodies,and the virtual joints were adopted to replace the actual joints with complex shape during modeling.Only the driving values were needed to be changed to obtain the actuated forces/torques and the reactions of the kinematic joints when the overconstrained PM was in arbitrary configuration,thus avoiding rebuilding the simulation model.Force analyses of three type of overconstrained PMs were carried out using the proposed method.The results show the correctness and universality of the method, meanwhile show that the method provides a simple and effective way for force analysis of the overconstrained PMs instead of complex calculations.

Key words: overconstrained , parallel mechanism(PM);numerical simulation;force analysis;rigid-flexible mixed model

中图分类号:

TH112
TP24

赵永生1,2;刘文兰1;许允斗1,2;姚建涛1,2;金林茹1，3. 一种过约束并联机构受力的数值仿真分析方法[J]. 中国机械工程, 2015, 26(12): 1576-1583.

Zhao Yongsheng1,2;Liu Wenlan1;Xu Yundou1,2;Yao Jiantao1，2;Jin　 Linru1,3. A Numerical Simulation Method for Force Analysis of an Overconstrained PM[J]. China Mechanical Engineering, 2015, 26(12): 1576-1583.

参考文献

[1]赵永生,许允斗,姚建涛,等.一种过约束并联机构受力分析的方法[J].
中国机械工程,2014,25(6):711-717.
Zhao   Yongsheng,Xu Yundou,Yao Jiantao.A Method for Force Analysis of    the Overconstrained Parallel Mechanism[J].China   Mechanical Engineering,2014,25(6):711-717.
[2]董军,黄清世.具有虚约束的平行四边形机构的受力分析[J].江汉石油学院学报,1991,13(3):64-71.
Dong Jun,Huang Qingshi.Force Analysis of Parallelogram Linkages with Formal Constraints[J].Journal of   Jianghan Petroteum Institute,1991,13(3):64-71.
[3]Huang Zhen,Zhao Yan,Liu Jingfang.Kinetostatic Analysis of 4-R(CRR) Parallel Manipulator   with Overconstraints Via Reciprocal-screw Theory[J].Advanced Mechanical Engineering,2010:404960.
[4]赵燕,黄真.含过约束力偶的少自由度并联机构的受力分析[J].机械工程学报,2010,46(5):15-21.
Zhao Yan,Huang Zhen.Force Analysis of Lower-mobility Parallel Mechanisms with Over-constrained Couples[J].Journal   of   Mechanical Engineering,2010,46(5):15-21.
[5]Kerr D R,Griffis M,Sanger D J,et al.Redundant Grasps,Redundant Manipulators,and Their Dual Relationship[J].Journal of Robotics System,1992,9(7):973-1000.
[6]Rocco V,Vincenzo P C.Static and Stiffness Analyses of a Class of Over-constrained Parallel Manipulators with Legs of Type US   and UPS[C]//2007 IEEE International Conference on Robotics and Automation.Roma,Italy:IEEE,2007:561-567.
[7]刘胜,李晚龙,杜延春,等.潜器Stewart平台动力学仿真[J].哈尔滨工业大学学报,2009,41(9):249-251.
Liu Sheng,Li Wanlong,Du Yanchun,et al.Dynamic Simulation of Submarine   Stewart Platform[J].Journal of Harbin Institute of Technology,2009,41(9):249-251.
[8]王瑞,钟诗胜,王知行.5轴新型数控铣床仿真建模的实现[J].计算机集成制造系统,2005,11(8):1076-1080.
Wang Rui,Zhong Shisheng,Wang Zhixing.Research on 5-DOF NC Milling Machine Simulation Modeling[J].Computer Integrated Manufacturing Systems,2005,11(8):1076-1080.
[9]郝秀清,胡福生, 陈建涛.基于牛顿—欧拉法的3PTT并联机构动力学分析及仿真[J].中国机械工程,2006,17（增刊2）:32-36.
Hao Xiuqing,Hu Fusheng,Chen Jiantao.Dynamic Analysis and Simulation to 3PTT Parallel Mechanism Based on New-euler Method[J].China Mechanical Engineering,2006,17(S2):32-36.
[10]徐晓辉,段志善.ADAMS中过约束问题的分析[J].中国科技信息,2008(22):93-95.
Xu Xiaohui,Duan Zhishan.The Analysis of Overconstrained Problem in ADAMS[J].China Science   and Technology Information,2008(16):93-95.
[11]陈落根,罗振军,李玉航,等.基于SAMCEF的四自由度并联机器人动力学建模与仿真[J].机械设计与研究,2013,29（6）:12-15.
Chen Luogen,Luo Zhenjun,Li Yuhang,et al.The Dynamics Modeling and Simulation for    a   4-DOF Parallel Robot Based   on   SAMCEF Software[J].Machine   Design and Research,2013,29(6):12-15.
[12]朱春霞,朱立达, 刘永贤,等.基于虚拟样机技术的并联机床多柔体系统运动学仿真分析[J].机床与液压,2008,36(4):11-13.
Zhu Chunxia,Zhu Lida,Liu Yongxian,et al.Kinematical Simulation of   Flexible Multibody System for Parallel Machine Tool Based on Virtual Prototyping[J].Machine Tool   & Hydraulics,2008.36(4):11-13.
[13]张建,陈文家,赵兰磊.基于ADAMS的一种风洞试验平台刚柔混合多体建模研究[J].制造业信息化,2011(12):59-62.
Zhang Jian,Chen Wenjia,Zhao Lanlei.Modeling of a New Wind Tunnel Test Bed with Rigid and Flexible Body Based on Virtual Prototyping Technology[J].Manufacturing Informatization,2011(12):59-62.
[14]李增刚.ADAMS入门详解与实例[M].北京:国防工业出版社,2012.
[15]刘善增,余跃庆,刘庆波,等.3-RRC并联机器人动力学分析[J].机械工程学报,2009,45(5):220-224.
Liu Shanzeng,Yu Yueqing,Liu Qingbo,et al.Dynamic Analysis of 3-RRC Parallel Manipulator[J].Journal of Mechanical   Engineering,2009,45(5):220-224.
[16]Joshi S A,Tsai L W.Jacobian Analysis of Limited-DOF Parallel Manipulators[J].ASME Journal Mechanical Design,2002,124(2):254-258.
[17]Xu Yundou,Yao Jiantao,Zhao Yongsheng.Inverse Dynamics and Internal Forces of   the Redundantly Actuated   Parallel Manipulators[J].Mechanism and Machine Theory,2012,51:172-184.