中国机械工程 ›› 2014, Vol. 25 ›› Issue (20): 2788-2794.

• 机械基础工程 • 上一篇    下一篇

车辆稳定性系统与四轮转向系统集成控制研究

宋宇1;陈无畏2;陈黎卿1,2   

  1. 1.安徽农业大学,合肥,230036
    2.合肥工业大学,合肥,230009
  • 出版日期:2014-10-25 发布日期:2014-10-24
  • 基金资助:
    国家自然科学基金资助项目(51305004, 51075112);安徽省自然科学基金资助项目(1308085QE94) 

Study on Integrated Control of Vehicle Stability System and Four Wheel Steering System

Song Yu1;Chen Wuwei2;Chen Liqing1,2   

  1. 1.Anhui Agricultural University,Hefei,230036
    2.Hefei University of Technology,Hefei,230009
  • Online:2014-10-25 Published:2014-10-24
  • Supported by:
    National Natural Science Foundation of China(No. 51305004, 51075112);Anhui Provincial Natural Science Foundation of China(No. 1308085QE94)

摘要:

通过ADAMS/Car软件建立了车辆虚拟样机模型,车辆模型具有四轮独立制动和四轮转向的能力。在车辆稳定性系统和四轮转向系统的基础上,基于MATLAB设计了一种分层式集成控制系统,由上层控制器和下层子系统控制器组成。下层子系统控制器包括车辆稳定性控制子系统(以目标横摆角速度为控制目标)和四轮转向控制子系统(以车身质心零侧偏角为控制目标)。上层控制器为基于规则的系统管理控制器,考虑子系统间的相互耦合因素,协调子系统间的工作关系。理论分析和仿真结果表明,构建的分层式集成控制系统是一个行之有效的综合仿真和优化控制的系统,其性能优于单独控制和叠加控制,使车辆的操纵稳定性和安全性得到显著提高,所得结果为集成控制在车辆工程中的实际应用提供了参考。

关键词: 车辆稳定性控制, 四轮转向控制, 集成控制, 虚拟样机

Abstract:

This paper built a vehicle virtual prototype model with ADAMS/Car, the vehicle model had the ability of four wheel independent braking and four wheel steering. Based on the vehicle stability system and four wheel steering system, a kind of hierarchical integrated control system was designed,which consisted of upper controller and lower subsystem controller. The lower subsystem controller included the vehicle stability control subsystem and four-wheel steering control subsystem. The vehicle stability control subsystem took the target yaw-rate as control target, and the four-wheel steering control subsystem took the body mass center zero side angle as control target. The upper controller was  a system management controller based on the rules which considered the mutual coupling factors among  subsystems, coordinated the relationship among the subsystems. The theoretical analysis and simulation results show that the hierarchical integrated control system has a better performance on improving the vehicle's stability and safety, its performance is better than that of the single control and superposition control and the simulation conclusions provide a reference for practical applications of the integrated control in vehicle engineering.

Key words: vehicle stability control, four wheel steering control, integrated control, virtual prototype

中图分类号: