机电集成超环面传动啮合参数激励下的稳定性分析

J4 ›› 2007, Vol. 18 ›› Issue (24): 2947-2950.

机电集成超环面传动啮合参数激励下的稳定性分析

郝秀红;许立忠

收稿日期:1900-01-01 修回日期:1900-01-01 出版日期:2007-12-25 发布日期:2007-12-25

Stability Analysis for Electromechanical Integrating of Toroidal Drive under the Parameter Excitation of Mesh-stiffness

Hao Xiuhong;Xu Lizhong

Received:1900-01-01 Revised:1900-01-01 Online:2007-12-25 Published:2007-12-25

摘要/Abstract

摘要：

针对机电集成超环面传动系统在传动过程中因啮合齿数变化产生的系统内部激励，给出了系统行星轮与蜗杆、定子间刚度随时间变化的刚度函数。将系统位移分为静位移和动位移，用分段函数及小参数表示系统刚度矩阵，导出了系统正则化微分方程。利用通解的连续性及正规解条件，讨论了系统在啮合参数激励下的稳定性，并用算例进行了证明和分析。

关键词: 机电集成；超环面传动；参数激励；稳定性

Abstract:

For the stiffness variety in mesh,i.e. interior excitation of the system,aroused by mesh teeth change in electromechanical integrated toroidal drive,the stiffness functions of planet between worm and stator of the system to time were presented.The system displacements consisted of static and dynamic displacements.The stiffness matrix was concretely expressed with subsection functions and little parameter, and the system differential function could be simplified into some isolated eigenfunction.The stability of the system was discussed by the continuity of solution and the condition of normal solution, which was synchronously proved and analyzed by an example.

Key words: electromechanical integration;toroidal drive;parameter excitation, stability

中图分类号:

TH132

郝秀红;许立忠. 机电集成超环面传动啮合参数激励下的稳定性分析[J]. J4, 2007, 18(24): 2947-2950.

Hao Xiuhong;Xu Lizhong. Stability Analysis for Electromechanical Integrating of Toroidal Drive under the Parameter Excitation of Mesh-stiffness[J]. J4, 2007, 18(24): 2947-2950.

[1]	王成;方宗德;贾海涛;吉强;. 修形人字齿轮传动误差计算与试验研究[J]. J4, 2009, 20(20): 0-2398.
[2]	马星国;;陆扬;尤小梅;;. 基于多柔体动力学技术的行星轮系多体动力学仿真分析[J]. J4, 2009, 20(16): 0-2015.
[3]	郑大周;许立忠;;. 机电集成超环面传动定子的位移分析[J]. J4, 2009, 20(08): 0-1007.
[4]	贾巨民;高波;. 越野汽车分动器非圆行星差速器概念模型[J]. J4, 2008, 19(24): 0-2907.
[5]	秦磊;许立忠;. 简谐电压激励下静电谐波微电机的响应分析[J]. J4, 2008, 19(19): 0-2272.
[6]	沈云波;方宗德;赵宁;郭辉;. 齿廓方向修形的斜齿面齿轮啮合特性研究[J]. J4, 2008, 19(18): 0-2161.
[7]	赵玉民;马延会;华林;刘进;. 非圆锥齿轮节曲线的平面展开算法研究[J]. J4, 2008, 19(17): 0-2089.
[8]	苑明海;白颖;李东波;. 可重构装配线多目标优化调度研究[J]. J4, 2008, 19(16): 0-1894.
[9]	武传宇;金玉珍;贺磊盈. 基于包络特征的非圆齿轮齿廓计算方法研究[J]. J4, 2008, 19(15): 0-1889.
[10]	易传云;钟瑞龄;曹祥敖;陈静;. 具有急回特性的插齿主运动机构优化[J]. J4, 2008, 19(10): 0-.
[11]	李政民卿;朱如鹏;. 基于包络法的正交面齿轮齿廓尖化研究[J]. J4, 2008, 19(9): 0-1133.
[12]	孟繁忠;李;春;程亚兵. Hy-Vo齿形链链轮公法线长度的计算方法[J]. J4, 2007, 18(23): 0-2859.
[13]	蒙运红;吴昌林. 数控加工摆线齿廓实际传动比的计算方法[J]. J4, 2007, 18(23): 0-2820.
[14]	王;勇;张京正;张建方. 复合齿廓齿形链链轮设计及动态特性研究[J]. J4, 2007, 18(22): 0-2740.