基于灰相似关系和多维关联约束的新产品初始配置方法

中国机械工程 ›› 2013, Vol. 24 ›› Issue (22): 3045-3051.

基于灰相似关系和多维关联约束的新产品初始配置方法

李浩;郭钢;周婧;杨方燕

重庆大学,重庆,400044

出版日期:2013-11-25 发布日期:2013-11-29
基金资助:
国家“十二五”科技支撑计划资助项目(2012BAF12B09,2012BAH32F04)

New Product Configuration Method Based on Grey Similarity Relation and Multidimensional Association Rule

Li Hao;Guo Gang;Zhou Jing;Yang Fangyan

Chongqing University,Chongqing,400044

Online:2013-11-25 Published:2013-11-29
Supported by:
The National Key Technology R&D Program（No. 2012BAF12B09,2012BAH32F04）

摘要/Abstract

摘要：

为了解决新产品开发策划中将目标新产品概念模型中的结构化功能技术特性快速转化成新产品初始结构配置的问题,建立了多维关联约束的零部件资源库模型,针对分解后的新产品功能技术特性要求,根据零部件灰相似关系从零部件库查找出对应匹配或近似匹配的候选实例,按照零部件对产品总体功能技术作用的重要度排序,通过多维关联约束驱动和迭代匹配,逐步形成各零部件的总体候选方案,并根据综合匹配度确定最终匹配方案及其待改型设计和新设计的零部件。最后,通过一个实例对所提出的方法进行了验证。

关键词: 新产品开发策划, 多维关联约束, 灰相似关系, 可配置判据, 产品配置

Abstract:

To solve the problem of transforming the structured technical features in the target of new product concept model into intial configuration quickly, a part resource database model on multidimensional association rule was established. According to the requirements of the new product disaggrega-tire technical features, the corresponding or approximate matching candidate examples searched from the part resource database using grey similarity relation, and the important effect of parts on overall product technical features in ranking, through multidimensional association rule driving and iterative matching, the holistic candidate solution would be acquired. And according to the matching degree, the final matching project and the remodel or new part design would be confirmed. Finally, an example was used to verify the method.

Key words: new product development planning, multidimensional association rule, grey similarity, configurable judgment, product configuration

中图分类号:

TP391.1

李浩, 郭钢, 周婧, 杨方燕. 基于灰相似关系和多维关联约束的新产品初始配置方法[J]. 中国机械工程, 2013, 24(22): 3045-3051.

Li Hao, Guo Gang, Zhou Jing, Yang Fangyan. New Product Configuration Method Based on Grey Similarity Relation and Multidimensional Association Rule[J]. China Mechanical Engineering, 2013, 24(22): 3045-3051.

参考文献

[1]Mittal S, Frayman F. Towards a Generic Model of Configuration Tasks[C]//Detroit, MI: Morgan Kaufmann, 1989: 1395-1401.
[2]孙伟, 马沁怡, 高天一, 等. 基于本体和规则的产品配置系统研究[J]. 大连理工大学学报, 2011, 51(4): 529-534.
[3]Tiihonen Juha, Lehtonen Timo, Soininen Timo, et al. Modeling Configurable Product Families[C]//4th WDK Workshop on Product Structuring. Delft, 1998: 29-50.
[4]罗妤, 郭钢, 徐建萍. 基于多维关联规则的产品族配置研究[J]. 中国机械工程, 2011, 22(19): 2330-2336.
[5]Jiao J X, Simpson T W, Siddique Z. Product Family Design and Platform-Based Product Development: a State-of-the-Art Review[J]. Journal of Intelligent Manufacturing, 2007,18(1): 5-9.
[6]Tseng Hwaien, Chang Chienchen, Chang Shuhsuan. Applying Case-Based Reasoning for Product Configuration[J]. Expert Systems with Applications, 2005, 29: 913-925.
[7]延鹏, 赵丽萍, 王冠群, 等. 面向客户需求分析的产品模块化配置方法[J]. 计算机集成制造系统, 2010, 16(11): 2341-2345.
[8]徐剑, 裘乐淼, 张树有. 知识反馈的递进式产品配置设计技术[J]. 计算机集成制造系统, 2011, 17(6): 1135-1143.
[9]Burneika L. Product Configurator for Product Data Management System: Design of Internal Structure[J]. Mechanika, 2008, 3(71): 51-56.
[10]肖刚, 包志炎, 高飞, 等. 基于相似实例的板构件产品配置方法[J]. 计算机集成制造系统, 2010, 16(2): 233-238.
[11]王宏宇, 倪志伟, 严军, 等. 灰度关联理论在CBR中的应用研究[J]. 计算机技术与发展, 2010, 20(5): 96-99.
[12]蒋占四, 陈立平, 罗年猛. 最近邻实例检索相似度分析[J]. 计算机集成制造系统, 2007, 13(6): 1165-1168.
[13]范凯, 吴皓莹. 灰色系统关联度中一种新的分辨系数确定方法[J]. 武汉理工大学学报, 2002, 24(7): 86-88.
[14]Burkhard H D. Similarity and Distance in Case Based Reasoning[J]. Fundamenta Informaticae, 2001, 47: 201-215.