基于数字样机技术的隧道掘进机刀盘破岩机理分析

摘要/Abstract

摘要：

针对隧道掘进机(TBM)刀盘设计中刀具布置规律优化的问题，分析了TBM刀盘的破岩机理，建立了TBM工作时的刀具受力模型，并提出了如何提高刀盘破岩性能的方案。构建了带复杂约束的多变量非线性目标数学模型，并采用智能算法开发了一种针对刀盘上刀具布置规律的优化程序。针对EPB 6.28m型TBM刀盘上的盘形滚刀建立了破岩仿真有限元分析模型。在滚刀工作时的实际工况条件下进行了岩石压痕试验与线性切槽试验的仿真分析，获得了该盘形滚刀工作时的压力—贯入度关系以及最优刀间距范围,为TBM刀盘和盘形滚刀的参数设计以及刀具布局优化提供了参考。

关键词: 隧道掘进机, 优化设计, 破岩机理, 刀盘

Abstract:

The rock-broken mechanism during the operation of the cutter head of TBM was analyzed to study the layout of cutters.A model of the cutters under the action of forces during TBM's working was therefore developed, thus a scheme was proposed to improve the rock breakability of TBM's cutter head on which the cutters were laid out.Then,a nonlinear multi-objective mathematical model with complex constraints was developed,and an optimization program was provided via an intelligent algorithm for the layout design of cutters on the tunnel shield/cutter head of a TBM.Focus on EPB 6.28m fullface TBM,a rock breakage finite element mode was founded. Single disc cutter rock breakage simulation and adjacent disc cutter rock breakage simulation were calculated with setting of real working conditions.Penetration rate, granite stress distribution results under different normal forces and optimal cutter distances were obtained,providing significant results for disc cutter and cutter head's parameter design and layout optimization.

Key words: tunnel boring machine(TBM), optimal design, rock-broken mechanism, cutter head

中图分类号:

TH122

程军, 巩亚东, 李伟, 刘月明. 基于数字样机技术的隧道掘进机刀盘破岩机理分析[J]. 中国机械工程, 2013, 24(14): 1847-1853.

CHENG Jun, GONG E-Dong, LI Wei, LIU Ru-Meng. Rock Breakage Mechanism Analysis for Cutter Head of TBM Based on Digital Mockup[J]. China Mechanical Engineering, 2013, 24(14): 1847-1853.

参考文献

[1]张启君[1],张忠海[1],张宏[1],安时祥[2],仇国剑[2].对国内隧道盾构掘进机技术与市场需求量的探讨[J].非开挖技术,2003(4):76-80.
[2]ZhangQijun,ZhangZhonghai,ZhangHong,etal.Studyon MarketRequirementand TunnelShieldMachineTechnology[J].TrenchlessTechnology,2003,20(4/5):76-80.
[3]霍军周[1],史彦军[1],滕弘飞[1],柴荣峰[2],张丽华[2].全断面岩石掘进机刀具布置设计方法[J].中国机械工程,2008,19(15):1832-1836.
[4]HuoJunzhou,ShiYanjun,Teng Hongfei,etal.CutterLayoutDesignofFull-faceRock TunnelBoringMachine(TBM)[J].ChinaMechanicalEngineering,2008,19(15):1832-1835.
[5]张照煌,叶定海,赵庆玉.岩石掘进机刀具间距的确定及分析[J].工程机械,2002,33(11):11-12.
[6]Zhang Zhaohuang, Ye Dinghai, Zhao Qingyu.Analysisand Confirm ofTBM CutterPitch[J].ConstructionMachinery,2002(11):11-12.
[7]OzdemirL,MillerR,WangFD.MechanicalTunnelBoringPredictionandMachineDesign[M].Alexandria:NationalScienceFoundation,1977.
[8]日本地盘工学会.盾构法的调查·设计·施工[M].北京:中国建筑工业出版社,2008.
[9]RostamiJ.Developmentofa ForceSstimationModelforRock Fragmentation with DiscCuttersthroughTheoretical ModelingandPhysical MeasurementofCrushedZonePressure[D].Golden:ColoradoSchoolofMines,1997.
[10]GuoS,Chen W,CuiD.AeroelasticTailoringofCompositeWingStructuresbyLaminateLayupOptimization[J].AIAAJournal,2006,44(12):3146-3149.
[11]ParkJH,HwangJH,LeeCS.StackingSequenceDesign of Composite Laminates for MaximumStrengthUsingGeneticAlgorithms[J].CompositeStructure,2001,52(2):217-231.
[12]LiuB,HaftkaR T,Akgun M A.Two-levelCompositeWingStructuralOptimizationUsingResponseSurface[J].StructMultidiscOptim.,2000,20(2):87-96.
[13]KogisoN,WatsonLT,GuirdalZ.GeneticAlgorithms with LocalImprovementfor CompositeLaminateDesign[J].Struct.Optim.,1994,7(4):207-218.
[14]SchaafJC,ThompsonJL.System ConceptDevelopmentwithVirtualPrototyping[C]//Proceedingofthel997WinterSimulationConference.Atlanta,1997:941-947.
[15]曹文贵,方祖烈.岩石损伤软化统计本构模型之研究[J].岩石力学与工程学报,1998,17(6):628-633.
[16]CaoWengui,FangZulie,TangXuejun.AStudyofStatisticalConstitutiveModelforSofteningandDamageRocks[J].ChineseJournalofRock MechanicsandEngineering,1998,17(6):628-633.
[17]曹文贵[1],赵明华[1],刘成学[1].基于Weibull分布的岩石损伤软化模型及其修正方法研究[J].岩石力学与工程学报,2004,23(19):3226-3231.
[18]Cao Wengui, Zhao Minghua, Liu Chengxue.StudyontheModelandItsModifyingMethodforRock Softening and Damage Based on WeibullRandomDistribution[J].ChineseJournalofRockMechanicsandEngineering,2004,23(19):3226-3231.
[19]徐卫亚,韦立德.岩石损伤统计本构模型的研究[J].岩石力学与工程学报,2002,21(6):787-791.
[20]XuWeiya,WeiLide.StudyonStatisticalDamageConstitutiveModelofRock[J].ChineseJournalofRock Mechanicsand Engineering,2002,21(6):787-791.
[21]CookN G W,Hood M,TsaiF.ObservationsofCrackGrowthinHardRockLoadedbyanIndenter[J].Int.J.ofRock Mechanicsand MiningSciencesandGeomechanicsAbstracts,1984,21(2):97-107.
[22]LiuH Y,KouSQ,LindqvistCA,etal.NumericalSimulationoftheRockFragmentationProcessInducedbyIndenters[J].Int.J.ofRockMechanicsandMiningScience,2002,39(4):491-505.
[23]PangSS,Goldsmith W.InvestigationofCrackFormationduring Loading ofBrittle Rock[J].Rock Mechanicsand Rock Engineering,1990,23(1):53-63.
[24]PangSS,Goldsmith W,HoodM.AForce-indentationModelforBrittleRocks[J].Rock MechanicsandRockEngineering,1989,22(2):127-148.
[25]SnowdonRA,RyleyM D,TemporalJ.AStudyofDiscCuttinginSelectedBritishRocks[J].Int.
[26]J.ofRockMechanicsandMiningSciencesandGeomechanicsAbstracts,1982,19(3):107-121.
[27]SnowdonR A,Ryley M D,TemporalJ,etal.TheEffectofHydraulicStiffnessonTunnelBoringMachinePerformance[J].Int.J.ofRock Mechanicsand Mining Sciencesand GeomechanicsAbstracts,1983,20(5):203-214.
[28]RoxboroughFF,PhillipsH R.RockExcavationbyDiscCutter[J].Int.J.ofRockMechanicsandMining Sciences and Geomechanics Abstracts,1975,12(12):361-366.
[29]SanioH P.PredictionofthePerformanceofDiscCuttersinAnisotropicRock[J].Int.J.ofRockMechanicsand MiningSciencesandGeomechanicsAbstracts,1985,22(3):153-161.
[30]RostamiJ,OzdemirL.A New ModelforPerformancePredictionof Hard Rock TBMs[C]//RETCProceedings.Boston,1993:793-809.
[31]蒲毅[1],刘建琴[1],郭伟[1],裴瑞英[1].土压平衡盾构机刀盘刀具布置方法研究[J].机械工程学报,2011,47(15):161-168.
[32]PuYi,LiuJianqin,Guo Wei,etal.ResearchonCutting ToolLayout MethodofEarth PressureBalanceShield[J].ChineseJournalofMechanicalEngineering,2011,47(15):161-168.