中国机械工程 ›› 2013, Vol. 24 ›› Issue (02): 149-152.

• 机械基础工程 • 上一篇    下一篇

纸盆结构在压电式合成射流驱动器上的应用

张立1;王帮峰1;周勇2   

  1. Zhang Li 1;Wang Bangfeng1;Zhou Yong2
  • 出版日期:2013-01-25 发布日期:2013-02-01
  • 基金资助:
    国家自然科学基金资助项目(90405008)
    National Natural Science Foundation of China(No. 90405008)

#br# Applications of Cone Structure on Piezoelectric Synthetic Jet Actuator

1.南京航空航天大学,南京,210016#br# 2.南京信息工程大学,南京,210044   

  1. 1.Nanjing University of Aeronautics and Astronautics,Nanjing,210016
    2.Nanjing University of Information Science and Technology,Nanjing,210044
  • Online:2013-01-25 Published:2013-02-01
  • Supported by:
    National Natural Science Foundation of China(No. 90405008)

摘要:


将扬声器纸盆结构引入到压电式合成射流驱动器中,并制作了试件。使用热线风速仪测量了驱动器出口附近的时均速度、最大速度及沿中心线的射流分布。将实验结果与传统压电式合成射流驱动器的性能相比较,比较结果显示,驱动器在频响各区域射流特征不同,频率越高,正向射流越强烈;无论是从时均速度频响曲线还是从最大速度频响曲线上看,采用了纸盆结构的驱动器的驱动性能都有明显的提升;同时射流下游影响范围也有明显增大。总体来看,将纸盆结构引入到驱动器的设计中取得了较好的效果。

关键词: 纸盆结构, 压电式合成射流驱动器, 热线风速仪, 频率响应, 时均速度, 最大速度

Abstract:

Cone structure was introduced into the design of piezoelectric synthetic jet actuator.The specimen was made.And the velocities of outflows were detected by hotwire anemometer.The frequency response of time-average velocities and the frequency response of maximum velocity during one period were obtained.The results were compared to normal actuators' performances.It shows that:the jet velocity increases with the frequency of the actuator;the performance of the actuator with the cone structure is evidently enhanced;the region that the actuator effected on is obviously enlarged.Over all,the application of the cone structure is successful to the actuator.

Key words: cone structure, piezoelectric synthetic jet actuator, hotwire anemometer, frequency response, time-average velocity, maximum velocity

中图分类号: