The static and dynamic mechanical properties of stainless steel 0Cr18Ni9,with solution heat treatment under temperature 1100℃, were analyzed herein,through experiments with material testing system(MTS) and split Hopkinson pressure bar(SHPB) apparatus.On the basis of the above work,the constitutive
relations of the material were built using Johnson-Cook constitutive model.In addition,the material parameters of the model were observed by using the orthogonal experimental design.The two sets of the material parameters obtained from SHPB and cutting test were applied to predict cutting force under various machining conditions,and their applicability was compared.The comparison results provide the reference for the analysis model in stainless steel cutting research as well as the selection of material flow stress model during numerical computation.
基金资助:国家重点基础研究发展计划（973计划）资助项目(2009CB724306)
National Program on Key Basic Research Project (973 Program)（No. 2009CB724306）
引用本文:
凌玲, 李星星, 王学林, 胡于进. 0Cr18Ni9不锈钢本构模型及其对切削力预测影响分析[J]. 中国机械工程, 2012, 23(18): 2243-2248.
LING Ling, LI Xing-Xing, WANG Hua-Lin, HU Xu-Jin. Constitutive Model of Stainless Steel 0Cr18Ni9 and Its Influence on Cutting Force Prediction. China Mechanical Engineering, 2012, 23(18): 2243-2248.
Chandrasekaran H, M' Saoubi R, Chazal H. Model- ling of Material Flow Stress in Chip Formation Process from Orthogonal Milling and Spit Hopkin- son Bar Test[J]. Machining Science and Technolo- gy,2005,9(1) :131-145.
[2]
Umbrello D, M' Saoubi R, Outeiro J C. The Influ ence of Johnson--cook Material Constants on Finite Element Simulation of Machining of AISI 316L Steel[J]. International Journal of Machine Tools Manufacture, 2007,47(3/4) :462-470.
[3]
Han C, Kim K S. Time--dependent Crack Growth in Stainless Steel 304 in the Plasticity-- dominant Field[J]. Engineering Fracture Mechanics, 2001,68 (1):39-52.
Balk Y M,Kim K S. The Combined Effect of Fre quency and Load Level on Fatigue Crack Growth in Stainless Steel 304[J]. International Journal of Fa- tigue,2001,23(5) :417-425.
[6]
AI--Mousawi M M,Reid S R,Denas W F. Use of the Split Hopkinson Pressure Bar Techniques in High Rate Materials Testing[J]. Journal of Me- chanical Engineering Science, 1997, 211 (4): 273- 292.
Johnson G R,Cook W H. A Constitutive Model and Data for Metals Subjected to Large Strains, High Strain Rates and High Temperatures[C]//Proceed ings of the 7th International Symposium on Ballis- tics. Hague, Netherlands, 1983 : 541-547.
[10]
Tounsi N, Vincenti J, Otho A, et al. From the Basic Mechanics of Orthogonal Metal Cutting toward the Identification of the Constitutive Equation[J]. In- ternational Journal of Machine Tool & Manufac- ture,2002,42(12) : 1373-1383.
[11]
Lalwani D I, Mehta N K, Jain P K. Extension of Oxley's Predictive Machining Theory for Johnson and Cook Flow Stress Model[J]. Journal of Mate- rials Processing Technology, 2009, 209 (12/13): 5305-5312.
2012, Vol. 23 
