客制化产品材质意象决策支持模型

中国机械工程 ›› 2011, Vol. 22 ›› Issue (14): 1723-1728.

客制化产品材质意象决策支持模型

苏珂1,2;孙守迁1;柴春雷1;孙凌云1;刘征1

1.浙江大学,杭州,310027

2.山东轻工业学院,济南,250353

出版日期:2011-07-25 发布日期:2011-07-28
基金资助:
中央高校基本科研业务费专项资金资助项目(2010QNA5042)；国家自然科学基金资助项目(61004116，51005203，61070075)；温州市科技计划资助项目(H20100042)
Fundamental Research Funds for the Central Universities( No. 2010QNA5042 );

National Natural Science Foundation of China（No. 61004116，51005203，61070075）
Science and Technology program of Wenzhou( No. H20100042)

Customized Product Material Image Decision-making Support Model 

Su Ke1;Sun Shouqian1;Chai Chunlei1;Sun Lingyun1;

Liu Zheng1

1.Zhejiang University,Hangzhou,310027

2.Shandong Polytechnic University,Jinan,250353

Online:2011-07-25 Published:2011-07-28
Supported by:

Fundamental Research Funds for the Central Universities( No. 2010QNA5042 );

National Natural Science Foundation of China（No. 61004116，51005203，61070075）
Science and Technology program of Wenzhou( No. H20100042)

摘要/Abstract

摘要：

基于大量客制化的背景提出一种产品材质意象决策支持模型。该模型应用感性工学的理论架构，基于模糊层次分析法构建了产品材质与消费者感性意象之间的对应关系，用因子分析法提取产品材质风格因子，将意象词汇作为评价准则，采用模糊一致关系实现了模糊推导，使用模糊一致矩阵实现动态自适应。通过求解模型得到每个方案的排序值，方案排序结果最大程度地反映了决策者的偏好。通过座椅案例验证了该模型在实际应用中的实用性与有效性。

关键词:

客制化产品, 材质, 意象, 模糊层次分析

Abstract:

Aiming at the needs for product customization,this paper presented a decision-making support model based on the kansei engineering and the FAHP.Factor analysis was utilized to differentiate products into several styles;evaluation criteria were constructed by image words. It adopted fuzzy consistent relations to realize fuzzy reasoning rule and presented fuzzy consistent matrix method to accomplish dynamic adaptation.The results of defuzzification and sequencing are close to the psychological kansei image of the consumers. Finally, implementation of the proposed model was demonstrated in details via a case of chair material design.

Key words: customized product, material, image, fuzzy analytic hierarchy process(FAHP)

中图分类号:

TB472

苏珂1, 2, 孙守迁1, 柴春雷1, 孙凌云1, 刘征1.

客制化产品材质意象决策支持模型

[J]. 中国机械工程, 2011, 22(14): 1723-1728.

SU Ke-1, 2, SUN Shou-Qian-1, CHAI Chun-Lei-1, SUN Ling-Yun-1, LIU Zheng-1.

Customized Product Material Image Decision-making Support Model 

[J]. China Mechanical Engineering, 2011, 22(14): 1723-1728.

[1]	陈国东, 陈思宇, 王军, 孙守迁, 倪益华. 面向复合意象的产品形态多目标优化[J]. 中国机械工程, 2015, 26(20): 2763-2770.
[2]	周海海, 陈黎, 胡伟峰. 目标造型意象约束的质感与表面工艺选择[J]. 中国机械工程, 2012, 23(22): 2671-2675.
[3]	刘康林, 张经伟, 公涛. 超高压水晶釜的失效机理研究 [J]. 中国机械工程, 2011, 22(8): 914-916.
[4]	杨洪涛, 王从东, 张东速, 李梦, 孙玉玲. 高压水射流反射声信号特征值提取方法的研究 [J]. 中国机械工程, 2010, 21(20): 2434-2437,2467.
[5]	胡伟峰;赵江洪;赵丹华;. 基于造型特征线的汽车造型意象研究[J]. J4, 2009, 20(04): 0-382.