非正态参数二维分叉裂纹扩展寿命的可靠性分析

中国机械工程 ›› 2010, Vol. 21 ›› Issue (22): 2722-2725.

非正态参数二维分叉裂纹扩展寿命的可靠性分析

张艳林1;张义民1;金雅娟1;张艳芳2

1.东北大学,沈阳,110004

2.防灾科技学院,三河,065201

出版日期:2010-11-25 发布日期:2010-12-01
基金资助:
国家高技术研究发展计划(863计划)资助项目(2007AA04Z442)；国家自然科学基金资助重点项目(50875039)；“十一五”国家科技支撑计划资助项目(2009BAG12A02)；沈阳市人才资源开发专项资金资助项目(2007010103001)；沈阳市科学技术计划科技攻关项目(1071057-9-00)
National High-tech R&D Program of China (863 Program) （No. 2007AA04Z442）;

Key Program of National Natural Science Foundation of China（No. 50875039）;

The National Key Technology R&D Program（No. 2009BAG12A02）

Reliability Analysis for Propagation Life of Bifurcated Crack with Non-normal Random Parameters

Zhang Yanlin1;Zhang Yimin1;Jin Yajuan1;Zhang Yanfang2

1.Northeastern University,Shenyang,110004

2.Institute of Disaster Prevention Science and Technology,Sanhe,Hebei,065201

Online:2010-11-25 Published:2010-12-01
Supported by:

National High-tech R&D Program of China (863 Program) （No. 2007AA04Z442）;

Key Program of National Natural Science Foundation of China（No. 50875039）;

The National Key Technology R&D Program（No. 2009BAG12A02）

摘要/Abstract

摘要：

以材料属性和载荷为随机变量，以控制分叉裂纹扩展的修正Paris-Erdogan公式为基础，结合建立在随机有限元法基础上的四阶矩可靠性分析方法，提出了基本变量服从任意分布时，二维分叉裂纹扩展寿命可靠度的计算方法，裂纹扩展方向采用最大周向应力准则。以平面二维分叉裂纹为例分析了其扩展寿命及可靠度变化规律，结果表明,随着裂纹的扩展,平板剩余寿命逐渐缩短，剩余寿命对设计寿命的可靠度随着裂纹扩展而逐渐降低。

关键词:

裂纹扩展寿命, 分叉裂纹, 非正态随机参数, 四阶矩法, 可靠性

Abstract:

Stochastic finite element method, fourth moment reliability method were employed to present a reliability-based method for crack growth life of structures with non-normal random variables in which material properties and applied loadings were considered as random parameters. Taking reliability-based analysis for crack growth life of a plate with a bifurcated crack and subjected to constant distributed stress at up&down edges of the plate as a numerical example in which Paris-Endogan formula were used and the direction of the crack propagation followed the maximum circumferential stress criterion. The numerical results show that the fatigue life of the plate with bifurcated crack are longer than that of the plate without bifurcated crack for the same crack growth size, and the life reliability of the plate is descendent as the crack grows. 

Key words: crack propagation life, bifurcated crack, non-normal random parameter, fourth moment method, reliability

中图分类号:

O346.2

张艳林, 张义民, 金雅娟, 张艳芳.

非正态参数二维分叉裂纹扩展寿命的可靠性分析

[J]. 中国机械工程, 2010, 21(22): 2722-2725.

ZHANG Yan-Lin, ZHANG Xi-Min, JIN Ya-Juan, ZHANG Yan-Fang.

Reliability Analysis for Propagation Life of Bifurcated Crack with Non-normal Random Parameters

[J]. China Mechanical Engineering, 2010, 21(22): 2722-2725.

[1]	张根保, 许智, 何文辉, 涂林. 加工中心数控转台可靠性强化试验方法研究 [J]. 中国机械工程, 2011, 22(8): 948-951.
[2]	宋江波, 刘宏昭, 原大宁, 吴子英, 王建平. 数控机床传动系统精度可靠性研究 [J]. 中国机械工程, 2011, 22(7): 785-789.
[3]	王正. 基于四要素的机械零部件失效率计算模型 [J]. 中国机械工程, 2011, 22(12): 1472-1476.
[4]	郭夙昌, 黄洪钟. 基于蒙特卡洛仿真的制造资源网格任务可靠性分析  [J]. J4, 2009, 20(24): 2938-2942.