可监测性设计在机械产品中的应用研究

中国机械工程 ›› 2010, Vol. 21 ›› Issue (20): 2500-2504.

可监测性设计在机械产品中的应用研究

张月雷1,2;严新平1,3;袁成清1,3;白秀琴1,3

1.武汉理工大学,武汉,430063

2.中国人民解放军94270部队,济南,255017

3.船舶动力工程技术交通行业重点实验室,武汉,430063

出版日期:2010-10-25 发布日期:2010-10-29
基金资助:
国家自然科学基金资助项目(50975213)；高等学校学科创新引智计划资助项目(B08031)；中央高校基本科研业务费专项资金资助项目(2010-IV-027)
National Natural Science Foundation of China（No. 50975213）;
Fundamental Research Funds for the Central Universities( No. 2010-IV-027)

Study on Monitorability-based Design in Mechanical Equipment

Zhang Yuelei1,2;Yan Xinping1,3;Yuan Chengqing1,3;Bai Xiuqin1,3

1.Wuhan University of Technology,Wuhan,430063

2.Unit 94270 of PLA,Jinan,250117

3.Key Laboratory of Marine Power Engineering & Technology (Ministry of Communications),Wuhan,430063

Online:2010-10-25 Published:2010-10-29
Supported by:

National Natural Science Foundation of China（No. 50975213）;
Fundamental Research Funds for the Central Universities( No. 2010-IV-027)

摘要/Abstract

摘要：

分析可监测性设计在工程应用中的意义,明确可监测性设计过程中各个部门之间的信息流程,提出可监测性设计应用实施的系统框架。以内燃机试验机为对象,将可监测性设计的思想进行工程化应用试验。实践证明,可监测性设计在机械产品中的应用效果良好。研究工作为可监测性设计理论的推广和实际工程化应用开展了良好的尝试。



关键词:

可监测性, 可监测性设计, 机械设备, 生命周期

Abstract:

The advantages of implementation of monitorability-based design were analyzed,implementation information flows of monitorability-based design were pointed out among different departments and the overall implementation framework of monitorability-based design was given during life cycle of mechanical equipment.A case of monitorability-based design was carried out during design,manufacturing by

using simulation tester of internal combustion engine.The excellent feasibility of example application has demonstrated that it provides a good attempt for application and extension of monitorability-based design on engineering.

Key words:

monitorability, monitorability-based design, mechanical equipment, life cycle

中图分类号:

TH11

张月雷, 严新平, 袁成清, 白秀琴.

可监测性设计在机械产品中的应用研究

[J]. 中国机械工程, 2010, 21(20): 2500-2504.

ZHANG Ru-Lei, YAN Xin-Beng, YUAN Cheng-Qing, BAI Xiu-Qin.

Study on Monitorability-based Design in Mechanical Equipment

[J]. China Mechanical Engineering, 2010, 21(20): 2500-2504.

[1]	李聪波, 刘飞, 王秋莲, 曹华军, 曹乐. 面向生命周期的机床行业绿色制造运行模式 [J]. J4, 2009, 20(24): 2932-2937.
[2]	宾光富;;周元;Balbir;S.;Dhillon;. 基于Fuzzy-AHP的机械设备多特征参数健康状态综合评价研究[J]. J4, 2009, 20(20): 0-2519.
[3]	王雪;马俊杰;王晟. 机械设备状态的经验模式分解统计识别方法[J]. J4, 2008, 19(6): 0-644.
[4]	李世停;朱波;蔡琦;陈力生;. 基于机械设备零件约束关系的Petri网拆卸过程模型研究[J]. J4, 2008, 19(19): 0-2354.