基于相变和形变耦合法的20CrMnTi晶粒超细化

J4 ›› 201016, Vol. 21 ›› Issue (16): 1999-2002.

基于相变和形变耦合法的20CrMnTi晶粒超细化

许锋;薛克敏;李萍;王岗超;李琦

合肥工业大学,合肥,230009

出版日期:2010-08-25 发布日期:2010-08-25

Grain Ultra-refinement of Coupled Transformation with Deformation in 20CrMnTi Steel

Xu Feng;Xue Kemin;Li Ping;Wang Gangchao;Li Qi

Hefei University of Technology,Hefei,230009

Online:2010-08-25 Published:2010-08-25

摘要/Abstract

摘要：

为实现齿轮零件的超塑性精密成形,需要对齿坯材料晶粒进行超细化。试样经过3个道次的循环加热和冷却处理后,晶粒尺寸由初始的30～40μm细化到4～5μm,再将试样置于设计好的高压扭转装置内,利用2000kN的扭转压力机,在100kN保压状态下,使试样扭转0.5圈,通过形变进一步促进晶粒的超细化。结果表明：经过相变和形变耦合处理后,试样具备性能耦合的特征,晶粒得到了明显的细化和等轴化,晶粒尺寸达到了1μm。

关键词:

形变;相变;20CrMnTi;晶粒超细化

Abstract:

The grain of gear blanks need to be ultra-refined for realizing superplastic precision forming of gears.The grain of samples was refined from 30~40μm

to 4～5μm after three passes of treatment repeated heating and cooling.Then the samples were put into a designed high pressure torsion apparatus, which was fixed on the torsion press of 2000kN. The sample was twisted for half rotation,under the steady pressure of 100kN,which further enhanced the grain ultra-refinement by deformation.

The results reveal that the grain is refined clearly and equiaxed,The size of grain

reaches 1μm. The samples have characteristics of the coupled performances after treatment of coupled transformation with deformation.

Key words: deformation;transformation;20CrMnTi steel;grain ultra-refinement

中图分类号:

TG376

许锋, 薛克敏, 李萍, 王岗超, 李琦.

基于相变和形变耦合法的20CrMnTi晶粒超细化

[J]. J4, 201016, 21(16): 1999-2002.

HU Feng, XUE Ke-Min, LI Ping, WANG Gang-Chao, LI Qi.

Grain Ultra-refinement of Coupled Transformation with Deformation in 20CrMnTi Steel

[J]. J4, 201016, 21(16): 1999-2002.

导出引用管理器 EndNote|Ris|BibTeX

链接本文: http://www.cmemo.org.cn/CN/

http://www.cmemo.org.cn/CN/Y201016/V21/I16/1999