中国机械工程 ›› 2010, Vol. 21 ›› Issue (05): 556-562.

• 信息技术 • 上一篇    下一篇

基于建模过程的加工特征识别

李伟平1;郑琳2;龚志辉1
  

  1. 1.湖南大学汽车车身先进设计制造国家重点实验室,长沙,410082
    2.湖南涉外经济学院,长沙,410205
  • 出版日期:2010-03-10 发布日期:2010-03-22
  • 基金资助:
    教育部长江学者与创新团队发展计划资助项目(531105050037);长沙市科技计划资助项目(K0904036-11);湖南大学汽车车身先进设计制造国家重点实验室自主研究课题资助项目(60870001) 
    Supported by Program for Changjiang Scholars and Innovative Research Team in University(No. 531105050037);
    Science and Technology Program of Changsha( No. K0904036-11)

Machining Feature Recognition of Complicated Part Based on Modeling Process

Li Weiping1;Zheng Lin2;Gong Zhihui1
  

  1. 1.State Key Laboratory of Advanced Design and Manufacture for Vehicle Body,Hunan University,Changsha,410082
    2.Hunan International Economics University,Changsha,410205
  • Online:2010-03-10 Published:2010-03-22
  • Supported by:
     
    Supported by Program for Changjiang Scholars and Innovative Research Team in University(No. 531105050037);
    Science and Technology Program of Changsha( No. K0904036-11)

摘要:

针对复杂零件加工特征识别存在拓扑分析复杂、相交特征识别困难的问题,提出了利用CAD系统中以宏命令形式记录的建模过程进行特征识别的新方法。每次特征识别仅对单个建模过程中的几何实体和拓扑实体进行分析,逐一识别零件模型的所有特征,有效避免了传统方法对零件模型的全部几何实体和拓扑实体进行特征识别存在的缺陷。研究了输入数据获取和整理、基于二维草图的特征痕迹识别和特征参数获取的算法。

关键词:

Abstract:

There exist problems of complicated topology analysis and difficulty in intersection features recognition for complicated parts. A novel feature recognition method based on part modeling process which was recorded by way of macro command in CAD systems was proposed herein: geometry and topology entities which produced by single modeling process were analyzed in the single feature recognition process and all features in part were recognized based on step by step strategy.The limitation which the entirely geometry and topology entities should be analyzed in traditional method can be avoided. In order to offer a novel design method for intelligent interface for CAD/CAPP, the algorithm for input data acquirement and arrangement, feature hint recognition based on two-dimensional sketch, and feature parameter acquirement were mainly discussed.

Key words: feature recognition, modeling process, two-dimensional sketch, hint

中图分类号: