[成形过程的数据挖掘与深度学习方法]塑料注射成形智能技术及其应用

doi:10.3969/j.issn.1004-132X.2020.22.011

摘要/Abstract

摘要： 总结了当前塑料注射成形的产业需求和技术瓶颈，阐明了未来的发展趋势。根据塑料注射成形特性，提出“注射成形智能制造体系”的科学框架，建立以传感技术、工业以太网及互联网为基础的智能注射成形解决方案。围绕智能设计、智能优化、智能监控及制造数据平台四个层面，总结了注射成形中知识的组织与重用、自主决策与优化、过程感知与检测及云服务等技术，为实现塑料注射成形与新一代人工智能技术的深度融合指出了重要发展方向。

关键词: 塑料, 注射成形, 智能技术, 数据挖掘, 云制造

Abstract: The current industrial needs and technical bottlenecks of plastic injection molding, and the clarified future development trend were summarized. According to the characteristics of plastic injection molding, a scientific framework of the “intelligent manufacturing system of injection molding” was proposed, and the intelligent injection molding solutions based on sensor technology, industrial Ethernet and internet were established. Focusing on four levels, i.e. intelligent design, intelligent optimization, intelligent monitoring and manufacturing data platform, the knowledge organization and reuse, independent decision-making and optimization, process sensing and detection, cloud service and other technologies in injection molding were summarized, and the important development directions for the deep integration of plastic injection molding and new generation artificial intelligence technologies were pointed out.

Key words: plastic, injection molding, intelligent technology, data mining, cloud manufacturing

中图分类号:

TQ320.66

李阳, 郭飞, 李茂源, 张云, 李德群. [成形过程的数据挖掘与深度学习方法]塑料注射成形智能技术及其应用[J]. 中国机械工程, DOI: 10.3969/j.issn.1004-132X.2020.22.011.

LI Yang, GUO Fei, LI Maoyuan, ZHANG Yun, LI Dequn. Intelligent Technology of Plastic Injection Molding and Its Applications[J]. China Mechanical Engineering, DOI: 10.3969/j.issn.1004-132X.2020.22.011.

参考文献

［1］张洁. 制造业大数据［M］.上海：上海科学技术出版社, 2016.
ZHANG Jie. Big Data in Manufacturing［M］. Shanghai: Shanghai Science and Technology Press, 2016.
［2］KOZJEK D, KRALJ D, BUTALA P， et al. A Data-driven Holistic Approach to Fault Prognostics in a Cyclic Manufacturing Process［J］. Procedia CIRP, 2017, 63: 664-669.
［3］KRUTH J P, WILLEMS R. Intelligent Support System for the Design of Injection Moulds［J］. Journal of Engineering Design, 1994, 5(4): 339-351.
［4］RAVIWONGSE R, ALLADA V. Artificial Neural Network Based Model for Computation of Injection Mould Complexity［J］. International Journal of Advanced Manufacturing Technology, 1997, 13(8): 577-586.
［5］BRITTON G A, TOR S B, LAM Y C， et al. Mo-delling Functional Design Information for Injection Mould Design［J］. International Journal of Production Research, 2001, 39(12): 2501-2515.
［6］ONG S K, PROMBANPONG S, LEE K S. An Object-oriented Approach to Computer-aided Design of a Plastic Injection Mould［J］. Journal of Intelligent Manufacturing, 1995, 6(1): 1-10.
［7］IRANI R K, KIM B H, DIXON J R. Towards Automated Design of the Feed System of Injection Molds by Integrating CAE, Iterative Redesign and Features［J］.Journal of Engineering for Industry,117(1):1-8.
［8］NEE A Y C, FU M W, FUH J Y H， et al. Determination of Optimal Parting Directions in Plastic Injection Mold Design［J］. CIRP Annals, 1997, 46(1): 429-432.
［9］CHEN L L, CHOU S Y, WOO T C. Partial Visibility for Selecting a Parting Direction in Mold and Die Design［J］. Journal of Manufacturing Systems, 1995, 14(5): 319.
［10］PARK S J, KWON T H. Thermal and Design Sensitivity Analyses for Cooling System of Injection Mold, Part 1: Thermal Analysis［J］. The ASME Journal of Manufacturing Science and Engineering 1998,120(2):287-295.
［11］王小军. 基于本体的注塑模具设计案例检索方法研究［D］. 广州：广东工业大学, 2015.
WANG Xiaojun. Research on Injection Mold Design with Case Retrieval Base on Ontology［D］. Guangzhou: Guangdong University of Technology, 2015.
［12］于同敏, 张享倩. 基于 CBR 的注塑模具侧向抽芯机构设计研究［J］. 塑料科技, 2012(5): 81-85.
YU Tongmin, ZHANG Xiangqian. Study on the Design of Injection Mould Side Core-pulling Mechanism Based on CBR ［J］. Plastic Science and Technology, 2012(5):81-85.
［13］WANG V W, HIEBER C A, WANG K K. Dynamic Simulation and Graphics for the Injection Molding of Three-dimensional Thin Parts［J］. Journal of Polymer Engineering, 1986, 7(1): 21-45.
［14］CHIANG H H, HIEBER C A, WANG K K. A Unified Simulation of the Filling and Postfilling Stages in Injection Molding. Part I: Formulation［J］. Polymer Engineering & Science, 1991, 31(2): 116-124.
［15］HIMASEKHAR K, LOTTEY J, WANG K K. CAE of Mold Cooling in Injection Molding Using a Three-dimensional Numerical Simulation［J］. Journal of Manufacturing Science and Engineering, Transactions of the ASME, 1992, 114(2): 213-221.
［16］BATOZ J L, LARDEUR P. A Discrete Shear Triangular Nine D.O.F. Element for the Analysis of Thick to Very Thin Plates［J］. International Journal for Numerical Methods in Engineering, 1989, 28(3): 533-560.
［17］ISAYEV A I. Orientation, Residual Stresses, and Volumetric Effects in Injection Molding［M］∥Injection and Compression Molding Fundamentals. Routledge, 2018: 227-328.
［18］PICHELIN E, COUPEZ T. A Taylor Discontinuous Galerkin Method for the Thermal Solution in 3D Mold Filling［J］. Computer Methods in Applied Mechanics and Engineering, 1999, 178(1/2): 153-169.
［19］LIU X, GUO F, ZHANG Y, et al. An Efficient Coupled Pressure-velocity Solver for Three-dimensional Injection Molding Simulation Using Schur Complement Preconditioned FGMRES［J］. Engineering Computations, 2019,36(4):1101-1120.
［20］MLLER-PLATHE F. Coarse-graining in Polymer Simulation: from the Atomistic to the Mesoscopic Scale and Back［J］. Chem. Phys. Chem., 2002, 3(9): 754-769.
［21］de GENNES P G. Reptation of a Polymer Chain in the Presence of Fixed Obstacles［J］. The Journal of Chemical Physics, 1971, 55(2): 572-579.
［22］DOI M. Soft Matter Physics［M］. New York ：Oxford University Press, 2013.
［23］KWONG C K, SMITH G F, LAU W S. Application of Case Based Reasoning in Injection Moulding［J］. Journal of Materials Processing Technology, 1997, 63(1/3): 463-467.
［24］MOK S L, KWONG C K, LAU W S. An Intelligent Hybrid System for Initial Process Parameter Setting of Injection Moulding［J］. International Journal of Production Research, 2000, 38(17): 4565-4576.
［25］SHELESH-NEZHAD K, SIORES E. An Intelligent System for Plastic Injection Molding Process Design［J］. Journal of Materials Processing Technology, 1997, 63(1/3): 458-462.
［26］HE W, ZHANG Y F, LEE K S, et al. Automated Process Parameter Resetting for Injection Moulding: a Fuzzy-neuro Approach［J］. Journal of Intelligent Manufacturing, 1998, 9(1): 17-27.
［27］GAO Y, TURNG L S, WANG X. Adaptive Geometry and Process Optimization for Injection Molding Using the Kriging Surrogate Model Trained by Numerical Simulation［J］. Advances in Polymer Technology: Journal of the Polymer Processing Institute, 2008, 27(1): 1-16.
［28］ZHOU H, ZHAO P, FENG W. An Integrated Intelligent System for Injection Molding Process Determination［J］. Advances in Polymer Technology: Journal of the Polymer Processing Institute, 2007, 26(3): 191-205.
［29］LI D, ZHOU H, ZHAO P, et al. A Real-time Process Optimization System for Injection Molding［J］. Polymer Engineering & Science, 2009, 49(10): 2031-2040.
［30］GUO F, ZHOU X, LIU J, et al. A Reinforcement Learning Decision Model for Online Process Parameters Optimization from Offline Data in Injection Molding［J］. Applied Soft Computing, 2019, 85: 105828.
［31］CHEN W C, NGUYEN M H, CHIU W H, et al. Optimization of the Plastic Injection Molding Process Using the Taguchi Method, RSM, and Hybrid GA-PSO［J］. The International Journal of Advanced Manufacturing Technology, 2016, 83(9/12): 1873-1886.
［32］ZHAO J, CHENG G. An Innovative Surrogate-based Searching Method for Reducing Warpage and Cycle Time in Injection Molding［J］. Advances in Polymer Technology, 2016, 35(3): 288-297.
［33］KURTARAN H, ERZURUMLU T. Efficient Warpage Optimization of Thin Shell Plastic Parts Using Response Surface Methodology and Genetic Algorithm［J］. The International Journal of Advanced Manufacturing Technology, 2006, 27(5/6): 468-472.
［34］KITAYAMA S, YOKOYAMA M, TAKANO M, et al. Multi-objective Optimization of Variable Packing Pressure Profile and Process Parameters in Plastic Injection Molding for Minimizing Warpage and Cycle Time［J］. The International Journal of Advanced Manufacturing Technology, 2017, 92(9/12): 3991-3999.
［35］张玲利. 多变量统计过程控制及其在注塑成型过程中的应用研究［D］. 北京: 北京化工大学, 2007.
ZHANG Lingli. MSPC and Its Application in Injection Molding［D］. Beijing: Beijing University of Chemical Technology Press, 2007.
［36］HE Bobing. Characterizing of Polymer Morphologies & in-situ Monitoring of Injection Molding Process Using Ultrasonic Techniques ［D］. Chengdu: Sichuan University Press, 2007.
［37］EDWARDS R, THOMAS C. On-line Measurement of Polymer Orientation Using Ultrasonic Technology［J］. Polymer Engineering & Science, 2001, 41(9): 1644-1653.
［38］叶庆莹, 张逸, 沈关成,等. 碳纤维增强塑料的纤维取向介电测量方法［J］. 塑料工业, 2019(5):103-106.
YE Qingying, ZHANG Yi, SHEN Guancheng, et al. Dielectric Method for Fiber Orientation Measurement of Carbon Fiber Reinforced Plastic［J］. China Plastics Industry, 2019(5):103-106.
［39］RIBEIRO B. Support Vector Machines for Quality Monitoring in a Plastic Injection Molding Process［J］. IEEE Transactions on Systems, Man, and Cybernetics, Part C (Applications and Reviews), 2005, 35(3): 401-410.
［40］周昊飞, 刘玉敏. 基于深度置信网络的大数据制造过程实时智能监控［J］. 中国机械工程, 2018, 29(10): 1201-1207.
ZHOU Haofei, LIU Yumin. Real-time Intelligent Monitoring for Manufacturing Processes with Big Data Based on Deep Belief Networks［J］. China Mechanical Engineering, 2018, 29(10): 1201-1207.
［41］MACGREGOR J, CINAR A. Monitoring, Fault Diagnosis, Fault-tolerant Control and Optimization: Data Driven Methods［J］. Computers & Chemical Engineering, 2012, 47: 111-120.
［42］SPERANZA V, VIETRI U, PANTANI R. Monitoring of Injection Molding of Thermoplastics: Average Solidification Pressure as a Key Parameter for Quality Control［J］. Macromolecular Research, 2011, 19(6): 542.
［43］LU H, PLATANIOTIS K N, VENETSANOPOULOS A N. MPCA: Multilinear Principal Component Analysis of Tensor Objects［J］. IEEE Transactions on Neural Networks, 2008, 19(1): 18-39.
［44］ZHANG S, DUBAY R, CHAREST M. A Principal Component Analysis Model-based Predictive Controller for Controlling Part Warpage in Plastic Injection Molding［J］. Expert Systems with Applications, 2015, 42(6): 2919-2927.
［45］GE Z, YANG C, SONG Z. Improved Kernel PCA-based Monitoring Approach for Nonlinear Processes［J］. Chemical Engineering Science, 2009, 64(9): 2245-2255.
［46］HOFFMANN H. Kernel PCA for Novelty Detection［J］. Pattern Recognition, 2007, 40(3): 863-874.
［47］CHEN W C, TAI P H, WANG M W et al. A Neural Network-based Approach for Dynamic Quality Prediction in a Plastic Injection Molding Process［J］. Expert Systems with Applications, 2008, 35(3): 843-849.
［48］YANG Y, GAO F. Adaptive Control of the Filling Velocity of Thermoplastics Injection Molding［J］. Control Engineering Practice, 2000, 8(11): 1285-1296.
［49］DUBAY R, HU B, HERNANDEZ J M, et al. Controlling Process Parameters during Plastication in Plastic Injection Molding Using Model Predictive Control［J］. Advances in Polymer Technology, 2014, 33(S1):21449.
［50］RUAN Y, ZHANG Y, MAO T ,et al. Trajectory Optimization and Positioning Control for Batch Process Using Learning Control［J］. Control Engineering Practice, 2019, 85: 1-10.
［51］HOPMANN C, ABEL D, HEINISCH J ,et al. Self-optimizing Injection Molding Based on Iterative Learning Cavity Pressure Control［J］. Production Engineering, 2017, 11(2): 97-106.
［52］ZHANG Y, XI D, YANG H, et al. Cloud Manufacturing Based Service Encapsulation and Optimal Configuration Method for Injection Molding Machine［J］. Journal of Intelligent Manufacturing, 2019, 30(7): 2681-2699.
［53］LI Z, LIU X, WANG W M, et al. CKshare: Secured Cloud-based Knowledge-sharing Blockchain for Injection Mold Redesign［J］. Enterprise Information Systems, 2019, 13(1): 1-33.

[1]	陆剑峰, 韩调娟, 俞耀平. 基于服务编排的云制造服务协同[J]. 中国机械工程, 2021, 32(07): 849-859.
[2]	花少震, 孟凡净, 刘华博, 丁海. [成形过程仿真优化与集成计算材料工程]注射成形熔体喷射的三维模拟及消除对策研究[J]. 中国机械工程, 2020, 31(22): 2715-2722.
[3]	庞世宝1;郭顺生1;王磊1;李西兴2. 面向大规模个性化制造的车间制造服务协作链构建方法[J]. 中国机械工程, 2020, 31(17): 2104-2111.
[4]	李强, 汝渴, 刘计良, 张科. [数据驱动的智能服务]面向大规模个性化的交互式云制造模式[J]. 中国机械工程, 2020, 31(07): 788-796.
[5]	和征;张志钊;李勃. 云制造供应链知识转移激励的演化博弈模型[J]. 中国机械工程, 2020, 31(06): 695-705.
[6]	张雷, 钟言久, 袁远, 李璟, 秦旭, 董万富. [智能设计与计划调度]基于数据挖掘的绿色设计中客户需求向工程特性权重转化方法[J]. 中国机械工程, 2019, 30(02): 174-182.
[7]	李敏波, 丁铎, 易泳. [质量优化]基于FP-Growth改进算法的轮胎质量数据分析[J]. 中国机械工程, 2019, 30(02): 244-251.
[8]	龚小容, 李孝斌, 尹超. [云制造]云制造环境下基于贝叶斯网络的机床装备资源优化决策方法[J]. 中国机械工程, 2018, 29(20): 2438-2445.
[9]	何巍, 贾国柱, 孔继利, 宗恒山. [云制造]基于可持续性的云制造多任务调度[J]. 中国机械工程, 2018, 29(18): 2215-2225.
[10]	刘永奎, 王力翚, 王曦, 徐旬. [云制造]云制造再探讨[J]. 中国机械工程, 2018, 29(18): 2226-2237.
[11]	董元发;吴正佳;杜轩;查靓;袁庆松. 非稳态云制造服务过程资源异常管理方法[J]. 中国机械工程, 2018, 29(10): 1193-1200.
[12]	贾子文;顾煜炯. 基于数据挖掘的风电机组齿轮箱运行状态分析[J]. 中国机械工程, 2018, 29(06): 650-658.
[13]	刘明周, 王强, 凌琳. 基于分层任务网络的云制造任务分解方法[J]. 中国机械工程, 2017, 28(08): 924-930.
[14]	鲁建厦, 胡庆辉, 董巧英, 汤洪涛. 面向云制造的混流混合车间调度问题[J]. 中国机械工程, 2017, 28(02): 191-198,205.
[15]	汤华茂, 郭钢. 云制造资源虚拟化描述模型及集成化智能服务模式研究[J]. 中国机械工程, 2016, 27(16): 2172-2178.