刚性悬挂四轮车辆静力学解算与均载性分析

中国机械工程

刚性悬挂四轮车辆静力学解算与均载性分析

覃艳明1;赵静一1;王向南2;马金玉1

1.燕山大学机械工程学院，秦皇岛，066004
2.秦皇岛优益重工科技有限公司，秦皇岛，066100

出版日期:2020-02-25 发布日期:2020-04-17
基金资助:
国家自然科学基金资助项目（51675461）

Static Calculation and Load Sharing Characteristics Analysis of Four-wheeled Vehicles with Rigid Suspension

QIN Yanming1;ZHAO Jingyi1;WANG Xiangnan2;MA Jinyu1

1.School of Mechanical Engineering,Yanshan University,Qinhuangdao,Hebei,066004
2.Qin Huang Dao Youyi Heavy Industry S&T Co.,Ltd.,Qinhuangdao,Hebei, 066100

Online:2020-02-25 Published:2020-04-17

摘要/Abstract

摘要： 为研究刚性悬挂四轮车辆的均载特性，联立四轮车辆的静力平衡方程和变形协调方程，解算了各分支悬挂的承载力，计算得到了各分支悬挂的承载力和轮胎刚度的映射关系。在此基础之上，定义了不均衡载荷系数，分析得到了轮胎刚度变化及载运偏载量对车辆均载性能的影响规律。通过实验方法得到了轮胎的刚度数据，并对力学解算和均载性分析进行了验证。

关键词: 刚性悬挂, 四轮车辆, 静力学解算, 均载

Abstract: To research the load sharing characteristics of four-wheeled vehicles with rigid suspension, the statics calculation was done by simultaneous equation solutions of elastic deformation coordination equations and static forces balance equations. The mapping relationships between the suspension force and tire stiffness were obtained. Then, the unbalanced load coefficients of four-wheeled vehicles were defined, the influence rules of load sharing characteristics was produced by tire stiffness changes and the partial loads were analysed and obtained. The stiffness data of tire were obtained by experiments and the statics calculation, and load sharing characteristics analysis were verified.

Key words: rigid suspension, four-wheeled vehicle, statics calculation, sharing characteristic

中图分类号:

U463.1

覃艳明1;赵静一1;王向南2;马金玉1. 刚性悬挂四轮车辆静力学解算与均载性分析[J]. 中国机械工程.

QIN Yanming1;ZHAO Jingyi1;WANG Xiangnan2;MA Jinyu1. Static Calculation and Load Sharing Characteristics Analysis of Four-wheeled Vehicles with Rigid Suspension[J]. China Mechanical Engineering.

参考文献

[1]赵延治, 焦雷浩, 王向南,等. 钳夹车双层并联过约束机构力学解算与均载性分析[J]. 中国机械工程, 2017, 28(5): 576-582.
ZHAO Yanzhi, JIAO Leihao, WANG Xiangnan，et al. Static Calculation and Load Sharing Characteristics Analysis of Double Parallel over Constrained Lifting Mechanisms of Schnabel Car[J]. China Mechanical Engineering, 2017, 28(5):576-582.

[2]刘振国, 滕儒民, 吴海帆, 等. 一种八支腿起重机支腿反力研究[J]. 机械设计与制造, 2015(5):12-15.

LIU Zhenguo, TENG Rumin, WU Haifan，et al. Research on Outrigger Reaction Force of Eight-outrigger[J]. Machinery Design & Manufacture， 2015(5):12-15.

[3]王月云, 耿林, 张小委. 基于ANSYS Workbench分析影响高空作业车支腿软腿因素[J]. 农业装备技术, 2017, 43(5): 50-52.

WANG Yueyun, GENG Lin, ZHANG Xiaowei. Analysis of the Factors Affecting the Leg Soft Leg of Aerial Vehicle Based on ANSYS Workbench[J]. Agricultural Equipment & Technology, 2017, 43(5):50-52.
[4]张希望. 汽车起重机支腿压力实用型计算法[J]. 建筑机械化, 2018(3):31-34.

ZAHNG Xiwang. A Practical Method for Calculating the Outrigger Pressure of Truck Crane[J]. Construction Mechanization, 2018(3):31-34.

[5]张小广, 颜涛, 贾晓杰,等. 起重机支腿结构拓扑优化设计[J]. 工程机械, 2014, 45(5):37-40.

ZHANG Xiaoguang, YAN Tao, JIA Xiaojie，et al. Topological Optimization Design of Crane Outrigger Structure[J]. Construction Machinery and Equipment, 2014, 45(5):37-40.

[6]孙达. 汽车轮胎滚动半径试验研究[D]. 秦皇岛：燕山大学, 2005.

SUN Da. Test and Research of Automobile Tyre Rolling Radius[D]. Qinhuangdao: Yanshan University, 2005.

[7]韩玮, 刘志军. 基于平面法求解刚性支承平面多点支承的反力[J]. 建筑机械, 2013(7):100-101.

HAN Wei，LIU Zhijun. The Solution of Point Supported Reaction in Rigid Plane Based on Planar Method[J]. Construction Machinery, 2013(7):100-101.

[8]刘辛军, 汪劲松, 高峰. 并联六自由度微动机器人机构的设计方法[J]. 清华大学学报(自然科学版), 2001, 41(8): 16-20.

LIU Xinjun, WANG Jinsong, GAO Feng. Design of 6-DOF Parallel Microrobotics Mechanism [J]. Journal of Tsinghua University(Science and Technology), 2001, 41(8):16-20.

[9]韦志康, 何水龙, 杨蓉, 等. 基于LabVIEW的汽车轴重测量系统[J]. 汽车实用技术, 2010(1):50-53.

WEI Zhikang，HE Shuilong, YANG Rong，et al. Axle Load Measurement System for Automobile Based on LabVIEW [J], Automobile Applied Technology, 2010(1):50-53.

[10]中华人民共和国国家质量监督检验检疫总局. 机动车安全技术检验项目和方法[J]. 汽车与安全, 2015(2):58-85.

AQSIQ. Items and Methods of Power-driven Vehicles Safety Technology Inspection[J]. Automobile and Safety, 2015(2): 58-85.