考虑附加强化效应及平均应变的多轴疲劳寿命预估

摘要/Abstract

摘要： 考虑多轴加载条件下裂纹萌生和扩展的物理意义，将Miner理论与临界面法相结合提出了一种多轴等效线性疲劳寿命预估模型；将循环屈服应力与静态屈服应力的比值用来反映材料的循环强化能力，并定义了附加强化因子，考虑相位差及载荷条件对非比例附加强化效应的影响，对非对称加载下的平均应变进行了修正；利用等效应变预估模型、最大剪切应变幅模型及所提模型对5种材料的光滑及缺口试样多轴疲劳寿命进行了预估，并将预估结果与试验结果进行了对比分析，结果表明：比例加载时，3种模型都能获得较好的效果；非比例加载时，所提模型的预估效果要优于其他两种模型的预估效果。同时也验证了所提出的附加强化因子能够反映相位差及材料特性对附加强化效应的影响。

关键词: 多轴疲劳, 临界面法, Miner理论, 相位差, 附加强化

Abstract: Considering the physical significance of crack formations and propagations under multiaxial loading conditions , a multiaxial equivalent linear fatigue life prediction model was proposed based on Miner rule and critical plane method. The ratio of cyclic yield stress to static yield stress was used to reflect the cyclic strengthening capacity of the materials, and the additional hardening factor was defined. The influences of phase differences and loading conditions on the non-proportional additional hardening effects were considered, and the mean strains under asymmetrical loadings were corrected. Multiaxial fatigue lifes of smooth and notched samples for five kind of materials were estimated by equivalent strain prediction model, maximum shear strain amplitude model and the proposed model, and the estimated results were compared with the testing results. The results show that the three models may achieve good effectiveness under proportional loadings, but the proposed model performs better than that of the other two models under non-proportional loadings. Meanwhile, it also verified that the proposed additional hardening factor may reflect the influences of phase differences and material properties on additional hardening effects.

Key words: multiaxial fatigue, critical plane method, Miner rule, phase difference, additional hardening

中图分类号:

TH114
O346.2

刘俭辉1;吕鑫1;韦尧兵1;程金辉2. 考虑附加强化效应及平均应变的多轴疲劳寿命预估[J]. 中国机械工程.

LIU Jianhui1;LYU Xin1;WEI Yaobing1;CHENG Jinhui2. Multiaxial Fatigue Life Prediction Considering Additional Hardening Effects and Mean Stains[J]. China Mechanical Engineering.

参考文献

[1]ZHANG J, XIAO Q, SHI X, et al. Effect of Mean Shear Stress on Torsion Fatigue Failure Behavior of 2A12-T4 Aluminum Alloy[J]. International Journal of Fatigue, 2014, 67:173-182.

[2]万宏强, 高刚, 丁锋. GH4133轮盘材料疲劳失效概率分布类型研究[J]. 机械强度, 2016,38(3):166-171.

WAN Hongqiang, GAO Gang, DING Feng. Studying of Probability Distribution Types of Fatigue for GH4133 Disc Materials[J]. Journal of Mechanical Strength, 2016,38(3): 166-171.

[3]JIN D, TIAN D J, LI J H, et al. Low-cycle Fatigue of 316L Stainless Steel under Proportional and Nonproportional Loadings[J]. Fatigue & Fracture of Engineering Materials & Structures, 2016, 39(7): 850-858.

[4]张成成, 姚卫星. 一种新的多轴高周疲劳寿命预测模型[J]. 力学学报, 2010, 42(6): 1225-1230.

ZHANG Chengcheng, YAO Weixing. A New Model for Life Prediction of Multiaxial High-cycle Fatigue[J]. Chinese Journal of Theoretical and Applied Mechanics, 2010, 42(6): 1225-1230.

[5]LIU J, WEI Y, YAN C, et al. Method for Predicting Crack Initiation Life of Notched Specimen Based on Damage Mechanics[J]. Journal of Shanghai Jiao Tong University, 2018, 23(2): 286-290.

[6]夏天翔, 姚卫星, 刘向民, 等. 考虑材料分散性后Miner理论在多轴两级阶梯谱下的适用性研究[J]. 机械工程学报, 2015, 51(14): 38-45.

XIA Tianxiang, YAO Weixing, LIU Xiangmin, et al. Study on the Applicability of Miners Law under Multiaxial 2-stage Step Loading Spectra with Consideration of Material Dispersion[J]. Journal of Mechanical Engineering, 2015, 51（14）:38-45.

[7]王生楠, 郑晓玲. 运输类飞机防止广布疲劳损伤的新规章解读[J]. 航空学报, 2010, 31(9):1758-1768.

WANG Shengnan, ZHENG Xiaoling. Study on Proposed Rules to Preclude Widespread Fatigue Damage for Transport Category Aircraft[J]. Acta Aeronautica et Astronautica Sinica, 2010, 31(9):1758-1768.

[8]BROWN M W, MILLER K J. A Theory for Fatigue Failure under Multiaxial Stress-Strain Conditions[J]. Proceedings of the Institution of Mechanical Engineers1973, 187(1):745-755.

[9]WEI H, LIU Y. A Critical Plane-energy Model for Multiaxial Fatigue Life Prediction[J]. Fatigue & Fracture of Engineering Materials & Structures, 2017, 40(12): 1973-1983.

[10]李训涛, 廖霞霞, 胡明敏. 基于塑性应变能复杂应力场非比例加载疲劳寿命分析[J]. 力学季刊, 2017, 38(2): 345-350.

LI Xuntao, LIAO Xiaxia, HU Mingmin. Fatigue Life Prediction Analysis of the Non-proportional Loading on Complex Stress Field Based on Plastic Strain Energy[J]. Chinese Quarterly of Mechanics,2017, 38(2): 345-350.

[11]LUO P, YAO W, SUSMEL L, et al. A Survey on Multiaxial Fatigue Damage Parameters under Non-proportional Loadings[J]. Fatigue & Fracture of Engineering Materials & Structures, 2017, 40(9): 1323-1342.

[12]何国求, 陈成澍, 高庆,等. 基于微结构分析定义应变路径非比例度[J]. 金属学报, 2003, 39(7):715-720.

HE Guoqiu, CHEN Chengshu,GAO Qiing, et al. Definition of Non-proportionality of Strain Path Based on Microstructures Analysis[J]. Acta Metall Sinica, 2003, 39(7):715-720.

[13]于良,白菊丽,肖林.Zr-4合金双轴加载中的非比例附加软化与附加强化[J].西安交通大学学报, 2004, 38(3):299-302.

YU Liang, BAI Juli, XIAO Lin. Additional Softening and Strengthening Behavior of Hydrided Zr-4 under Biaxial Out-of-Phase Loading[J]. Journal of Xian Jiaotong University ,2004,38(3):299-302.

[14]MEGGIOLARO M A, WU H, de CASTRO J T P. Non-proportional Hardening Models for Predicting Mean and Peak Stress Evolution in Multiaxial Fatigue Using Tanakas Incremental Plasticity Concepts[J]. International Journal of Fatigue, 2016, 82:146-157.

[15]PAUL S K. Prediction of Non-proportional Cyclic Hardening and Multiaxial Fatigue Life for FCC and BCC Metals under Constant Amplitude of Strain Cycling[J]. Materials Science & Engineering A, 2016, 656:111-119.

[16]HUANG Y, TU S T, XUAN F Z. Pit to Crack Transition Behavior in Proportional and Non-Proportional multiaxial Corrosion Fatigue of 304 Stainless Steel[J]. Engineering Fracture Mechanics, 2017, 184: 259-272.

[17]赵而年, 瞿伟廉. 一种新的多轴非比例低周疲劳寿命预测临界面模型[J]. 力学学报,2016,48(4): 944-952.

ZHAO Ernian, QU Weilian. A New Proposal for Multiaxial Low-cycle Fatigue life Prediction under Non-proportional Loading[J]. Chinese Journal of Theoretical and Applied Mechanics, 2016,48(4): 944-952.

[18]张嘉梁. 一种考虑平均应力影响的高周多轴疲劳寿命预测方法[D]. 北京：北京工业大学, 2016.

ZHANG Jialiang. A Method for Predicting the High Cycle Multiaxial Fatigue Life Considering Average Stress[D]. Beijing: Beijing University of Technology, 2016.

[19]GLINKA G, SHEN G, PLUMTREE A. A Multiaxial Fatigue Strain Energy Density Parameter Related to the Critical Fracture Plane[J]. Fatigue & Fracture of Engineering Materials & Structures, 1995, 18(1): 37-46.

[20]尚德广, 姚卫星. 基于临界面法的多轴疲劳损伤参量的研究[J]. 航空学报, 1999, 20(4): 295-298.

SHANG Deguang, YAO Weixing. Study on Multiaxial Fatigue Damage Parameters Based on The Critical Plane Approach[J]. Acta Aeronautica et Astronautica Sinica, 1999, 20(4): 295-298.

[21]OHNO N, YAMAMOTO R, DAI O. Thermo-mechanical Cyclic Hardening Behavior of 304 Stainless Steel at Large Temperature Ranges: Experiments and Simulations[J]. International Journal of Mechanical Sciences, 2018,146/147:517-526.

[22]张小元. Q235钢多轴低周疲劳寿命及评估方法研究[D]. 南宁：广西大学, 2013.

ZHANG Xiaoyuan. Research on Multiaxial Low Cycle Fatigue and Life Evaluation for Q235 Steel[D]. Nanning: Guangxi University, 2013.

[23]LI B C, JIANG C, HAN X, et al. A New Path-dependent Multiaxial Fatigue Model for Metals under Different Paths[J]. Fatigue & Fracture of Engineering Materials & Structures, 2014, 37(2): 206-218.

[24]WU Z R, HU X T, SONG Y D. Multiaxial Fatigue Life Prediction for Titanium Alloy TC4 under Proportional and Nonproportional Loading[J]. International Journal of Fatigue, 2014, 59(3):170-175.

[25]金丹, 田大将, 缑之飞, 等. 一种疲劳缺口系数计算新方法[J]. 应用力学学报, 2015, (2): 271-275.

JIN Dan, TIAN Dajiang, GOU Zhifei, et al. A New Calculation Approach for Fatigue Notched Coefficient[J]. Chinese Journal of Applied Mechanics, 2015, 32(2):271-276.

[26]尚德广, 王德俊. 多轴疲劳强度[M]. 北京: 科学出版社, 2007:118-128.

SHANG Deguang, WANG Dejun. MultiaxialFatigue Strength[M]. Beijing: Science Press, 2007:118-128.