面向绿色制造的产品加工工艺规划方案评估

中国机械工程

面向绿色制造的产品加工工艺规划方案评估

李联辉1;许冠英2;高阳1;毛春雷3;王宏光4

1.北方民族大学机电工程学院，银川，750021
2.北方民族大学计算机科学与工程学院，银川，750021
3.水利部南京水利水文自动化研究所，南京，210012
4.中国船舶重工集团公司第七一三研究所，郑州，450015

出版日期:2019-09-10 发布日期:2019-09-11
基金资助:
国家自然科学基金资助项目（51765001）；
北方民族大学重点科研项目（2017KJ22）；
宁夏青年科技人才托举工程项目（TJGC2018048）；
宁夏高等学校一流学科建设项目（NXYLXK2017A07）；
宁夏自然科学基金资助项目（NZ17111,NZ17113）

Evaluation of Product Process Planning Schemes for Green Manufacturing

LI Lianhui1;XU Guanying2;GAO Yang1;MAO Chunlei3;WANG Hongguang4

1.College of Mechatronic Engineering,North Minzu University,Yinchuan,750021
2.College of Computer Science and Engineering,North Minzu University,Yinchuan,750021
3.Nanjing Automation Institute of Water Conservancy and Hydrology,Ministry of Water Resources,Nanjing,210012
4.The 713th Research Institute,China Shipbuilding Industry Corporation,Zhengzhou,450015

Online:2019-09-10 Published:2019-09-11

摘要/Abstract

摘要： 针对绿色制造背景下产品加工工艺规划方案评估中的不确定性和不相容性问题，提出了一种基于可拓分析和D-S理论的产品加工工艺规划方案评估方法。根据可拓分析理论，建立了产品加工工艺规划方案评估问题的经典域物元矩阵、节域物元矩阵和待评物元矩阵，并求得了待评物元矩阵的关联函数矩阵；经过转换处理后，建立了D-S理论的辨别框架，将拓展分析中的关联函数矩阵扩展为D-S理论中的基本概率指派（BPA）函数矩阵；采用综合考虑对比强度和冲突性的CRITIC法计算各特征的重要度，并对证据进行融合，根据融合后的BPA函数值对待评工艺规划方案进行分析比较，最后得到了多个工艺规划方案的分级结果以及同级方案的排序关系。通过某型号汽车后门框加工工艺规划方案评估的实例应用，验证了所提方法的有效性。

关键词: 工艺规划方案评估, 可拓分析, D-S理论, 关联函数, 物元

Abstract: In view of the uncertainty and incompatibility in the product process planning scheme evaluation under the background of green manufacturing, an evaluation method of product process planning scheme was proposed based on extension analysis and D-S theory. According to the extension analysis theory, the classical domain matter element matrix, the joint domain matter element matrix and the matter element matrix to be evaluated of product process planning scheme evaluation problem were established, and the correlation function matrix of the matter element matrix to be evaluated was obtained. The identification framework of D-S theory was established after conversion processing and the correlation function matrix in extension analysis was extended to the basic probability assignment(BPA) function matrix in D-S theory. The CRITIC method, which combined the contrast strength and conflict, was used to calculate the importance degree of each feature. The evidences were fused considering the feature importance degree. According to the BPA function values after fusion, the process planning schemes were analyzed and compared. Finally, the classification results of multiple process planning schemes and the ranking relations of the same level schemes were obtained. The effectiveness of the proposed method was verified by an example of an automobile rear door frame process planning scheme evaluation.

Key words: process planning scheme evaluation, extension analysis, D-S theory, correlation function, matter element

中图分类号:

TH164
TP391

李联辉1;许冠英2;高阳1;毛春雷3;王宏光4. 面向绿色制造的产品加工工艺规划方案评估[J]. 中国机械工程.

LI Lianhui1;XU Guanying2;GAO Yang1;MAO Chunlei3;WANG Hongguang4. Evaluation of Product Process Planning Schemes for Green Manufacturing[J]. China Mechanical Engineering.

参考文献

[1]刘飞, 曹华军, 何乃军. 绿色制造的研究现状与发展趋势[J]. 中国机械工程, 2000, 11(1):114-119.
LIU Fei, CAO Huajun, HE Naijun.On State-of-the-art of Green Manufacturing[J]. China Mechanical Engineering, 2000, 11(1):114-119.
[2]曹华军, 刘飞, 何彦,等. 面向绿色制造的机床设备选择模型及其应用[J]. 机械工程学报, 2004, 40(3):26-30.
CAO Huajun, LIU Fei, HE Yan, et al.Machine Tool Selection Model and Its Application for Green Manufacturing[J]. Chinese Journal of Mechanical Engineering, 2004, 40(3):26-30.
[3]张绪美, 张华. 生态文明下绿色制造评价与优化框架体系[J]. 现代制造工程, 2016 (10):153-158.
ZHANG Xumei, ZHANG Hua.Framework System of Green Manufacturing Evaluation and Optimization Based on Ecological Civilization[J]. Modern Manufacturing Engineering, 2016(10):153-158.
[4]SUH S H. A Green Productivity Based Process Planning System for a Machining Process[J]. International Journal of Production Research, 2014, 53(17):5085-5105.
[5]LIN Y C, TSAO C C, HSU C Y, et al. Evaluation of the Characteristics of the Microelectrical Discharge Machining Process Using Response Surface Methodology Based on the Central Composite Design[J]. International Journal of Advanced Manufacturing Technology, 2012, 62(9/12):1013-1023.
[6]ZHANG Jianfeng, PENG Anhua. Decision-making of Slicing Scheme in Fused Deposition Modeling Process Based on Analytical Hierarchical Process[J].Transactions of Nanjing University of Aeronautics and Astronautics, 2010,27(2):125-130.
[7]刘丽, 殷国富. 绿色产品制造工艺组合评价模型及应用[J]. 四川大学学报(工程科学版), 2010, 42(2):237-242.
LIU Li, YIN Guofu.Combination Evaluation Model and Its Application of Green Product Manufacturing Process[J]. Journal of Sichuan University (Engineering Science Edition), 2010, 42(2):237-242.
[8]刘晓军, 倪中华, 杨章群. 基于模糊偏好关系的工艺资源评价与选择的多准则群决策方法[J]. 东南大学学报(自然科学版), 2014, 44(1):63-69.
LIU Xiaojun, NI Zhonghua, YANG Zhangqun.Multi-criteria and Multi-experts Decision-making Method for Process Resource Evaluation and Selection Based on Fuzzy Preference Relation[J]. Journal of Southeast University (Natural Science Edition), 2014, 44(1):63-69.
[9]肖九一, 李双跃, 郭春香. 基于偏好关系的制造工艺资源评价与选择的模糊决策方法[J]. 模糊系统与数学, 2008, 22(5):95-100.
XIAO Jiuyi, LI Shuangyue, GUO Chunxiang.The Evaluating and Selecting of Manufacturing Process Resource Based on Preference Relation[J]. Fuzzy Systems and Mathematics, 2008, 22(5):95-100.
[10]刘雅荣. 基于区间层次分析法的机械加工工艺方案评价研究[J]. 机械设计与制造, 2015(12):258-260.
LIU Yarong. Study on the Evaluation of Mechanical Machining Process Plan Based on Interval-based Analytic Hierarchy Process[J]. Machinery Design & Manufacture, 2015(12):258-260.
[11]杨碧琦, 张丽新, 兰少飞. 基于模糊综合评判与虚拟装配的航天器装配工艺评价[J]. 现代制造工程, 2017(6):109-113.
YANG Biqi, ZHANG Lixin, LAN Shaofei. Evaluation of Spacecraft's Assembling Process Plan Based on Fuzzy Comprehensive Evaluation and Virtual Assembly[J]. Modern Manufacturing Engineering, 2017(6):109-113.
[12]李联辉,王丽,雷婷,等.制造企业供应商排序决策:基于SVM和TFN-RS的改进TOPSIS[J].计算机工程与科学,2018, 40(4):757-764.
LI Lianhui, WANG Li, LEI Ting, et al.Vendors Sequencing for Manufacturing Enterprise: Improved TOPSIS Based on SVM and Trapezoidal Fuzzy Number-rough Set Method[J]. Computer Engineering & Science,2018,40(4):757-764.
[13]赵晓雁, 沈敏, 王静宝. 基于低碳制造的机械加工工艺评价模型及应用[J]. 机械设计与制造, 2013(1):81-83.
ZHAO Xiaoyan, SHEN Min, WANG Jingbao. Machine Processing Manufacturing Evaluation Model and Its Application Based on Low Carbon Manufacturing[J]. Machinery & Manufacture, 2013(1):81-83.
[14]王南, 庞博, 刘开第. 机械加工工艺方案综合评价的未确知测度模型[J]. 机械设计与制造, 2013(11):270-272.
WANG Nan, PANG Bo, LIU Kaidi. The Unascertained Comprehensive Appraisement Model and Its Application on Comprehensive Evaluation of the Mechanical Process Plans[J]. Machinery Design & Manufacture, 2013(11):270-272.
[15]蔡文. 可拓学概述[J]. 系统工程理论与实践, 1998, 18(1):76-84.
CAI Wen.An Overview of Extenics[J]. Systems Engineering-Theory & Practice, 1998, 18(1):76-84.
[16]蔡文, 杨春燕. 可拓学的基础理论与方法体系[J]. 科学通报, 2013, 58(13):1190-1199.
CAI Wen, YANG Chunyan. Basic Theory and Methodology on Extenics[J]. Chinese Science Bulletin, 2013, 58(13):1190-1199.
[17]SHAFER G. A Mathematical Theory of Evidence[M]. Princeton: Princeton University Press, 1976.
[18]刘希亮, 陈桂明, 李方溪,等. 基于改进证据理论的多传感器信息融合故障诊断[J]. 中国机械工程, 2014, 25(10):1341-1345.
LIU Xiliang, CHEN Guiming, LI Fangxi, et al. Multi-sensor Information Fusion Fault Diagnosis Based on Improved Evidence Theory[J]. China Mechanical Engineering, 2014,25(10):1341-1345.
[19]孙瑞山, 占欣. 基于ISM-CRITIC法的通用航空可控飞行撞地影响因素分析[J]. 中国安全生产科学技术, 2018, 14(1):129-135.
SUN Ruishan, ZHAN Xin.Analysis on Influence Factors of Controlled Flight into Terrain of General Aviation Based on ISM-CRITIC Method[J]. Journal of Safety Science and Technology, 2018, 14(1):129-135.
[20]伍晓榕, 张树有, 裘乐淼,等. 基于模糊物理规划与互反馈的产品工艺方案绿色性分析[J]. 计算机集成制造系统, 2014, 20(9):2107-2116.
WU Xiaorong, ZHANG Shuyou, QIU Lemiao, et al. Product Process Schema for Green Manufacturing Based on Fuzzy Physical Programming and Mutual Feedback[J]. Computer Integrated Manufacturing Systems, 2014, 20(9):2107-2116.