[1]CHEN J, WU J, CHEN G, et al. Design and Development of a Multi-rotor Unmanned Aerial Vehicle System for Bridge Inspection[M]//Intelligent Robotics and Applications. Berlin: Springer, 2016.
[2]吴小伟, 茹煜, 周宏平. 无人机喷洒技术的研究[J]. 农机化研究, 2010, 32(7):224-228.
WU Xiaowei, RU Yu, ZHOU Hongping. Reaserch on Unmanned Aerial Vehicle Spraying Tchnique[J]. Journal of Agricultural Mechanization Research, 2010, 32(7): 224-228.
[3]汪沛, 罗锡文, 周志艳,等. 基于微小型无人机的遥感信息获取关键技术综述[J]. 农业工程学报, 2014, 30(18): 1-12.
WANG Pei, LUO Xiwen, ZHOU Zhiyan, et al. Key Technology for Remote Sensing Information Acquisition Based on Micro UAV[J]. Transactions of the Chinese Society of Agricultural Engineering, 2014, 30(18):1-12.
[4]曲东才. 微型无人机军事应用、研究进展及关键技术[J]. 航空科学技术, 2004(2):24-27.
QU Dongcai. Military Application and Development and Key Technologies of MAV[J]. Aeronautical Science and Technology, 2004(2):24-27.
[5]徐博, 陈立平, 谭彧,等. 基于无人机航向的不规则区域作业航线规划算法与验证[J]. 农业工程学报, 2015,31(23): 173-178.
XU Bo, CHEN Liping, TAN Yu, et al. Route Planning Algorithm and Verification Based on UAV Operation Path Angle in Irregular Area[J]. Transactions of the Chinese Society of Agricultural Engineering, 2015,31(23):173-178.
[6]CHEN G, WANG R, DONG W, et al. A Trajectory Planning and Control System for Quadrotor Unmanned Aerial Vehicle in Field Inspection Missions[C]//International Conference on Intelligent Robotics and Applications. Berlin: Springer, 2017:551-562.
[7]BIETERMAN M B, SANDSTROM D R. A Curvilinear Tool-path Method for Pocket Machining[J]. Journal of Manufacturing Science & Engineering, 2003, 125(4): 149-158.
[8]HELD M , SPIELBERGER C . A Smooth Spiral Tool Path for High Speed Machining of 2D Pockets[J]. Computer Aided Design, 2009, 41(7):539-550.
[9]毛征宇, 刘中坚. 一种三次均匀B样条曲线的轨迹规划方法[J]. 中国机械工程, 2010,21(21):2569-2572.
MAO Zhengyu, LIU Zhongjian. A Trajectory Planning Method for Cubic Uniform B-spline Curve[J]. China Mechanical Engineering, 2010, 21(21):2569-2572.
[10]叶伯生, 杨叔子. CNC系统中三次B-样条曲线的高速插补方法研究[J]. 中国机械工程,1998, 9(3):42-43.
YE Bosheng, YANG Shuzi. A High Speed Interpolation Algorithm for a Third-order B-spline Curve in CNC Systems[J]. China Mechanical Engineering, 1998, 9(3): 42-43.
[11]PHANG S K, LAI S, WANG F, et al. Systems Design and Implementation with Jerk-optimized Trajectory Generation for UAV Calligraphy[J]. Mechatronics, 2015, 30: 65-75.
[12]董伟. 四旋翼飞行机器人高性能轨迹生成与抗扰追踪控制技术研究[D]. 上海:上海交通大学, 2015.
DONG Wei. On Trajectory Generation and Disturbance Rejection Control of the Quadrotors[D]. Shanghai: Shanghai Jiao Tong University, 2015. |