中国机械工程

• 机械基础工程 • 上一篇    下一篇

机械密封润滑膜分布的超声检测技术

王建磊1;王晓虎1;张琛1;贾谦2;陈润霖1;刘凯1   

  1. 1.西安理工大学机械与精密仪器工程学院,西安,710048
    2.西安交通大学现代设计及转子轴承系统教育部重点试验室,西安,710049
  • 出版日期:2019-03-25 发布日期:2019-03-28
  • 基金资助:
    西安理工大学科技创新计划资助项目(2014CX006)

Distribution Detection Method of Film Thickness in Mechanical Seal Based on Ultrasonic Principle

WANG Jianlei1;WANG Xiaohu1;ZHANG Chen 1;JIA Qian2;CHEN Runlin1;LIU Kai1   

  1. 1. School of Machinery and Precision Instrument Engineering, Xi'an University of Technology, Xi'an, 710048
    2.Key Laboratory of Modern Design and Rotor Bearing System, Ministry of Education, Xi'an Jiaotong University, Xi'an,710049
  • Online:2019-03-25 Published:2019-03-28

摘要: 针对机械密封润滑膜分布检测问题,利用超声原理建立了机械密封润滑膜分布的多点测量模型。构建了由信号发生、超声发射-接收、数据采集及数据存储-显示等模块组成的润滑膜分布测量系统,并配备了模拟测量装置。在模拟测量装置上对厚度为5 μm、10 μm和20 μm的润滑膜进行了检测。结果表明:采用超声原理可对润滑膜分布进行精确测量,单点测量误差范围为0.2~1.1 μm,膜厚5 μm的检测精度最高。

关键词: 机械密封, 润滑膜分布, 超声检测, 弹簧模型

Abstract: Aiming at the problems of distribution detection of mechanical seal lubricating films, a multi-point measurement model of mechanical seal lubrication film distribution by ultrasonic principles was established herein. A lubrication film distribution measurement system  was constructed, which was composed of modules for signal generation, ultrasonic transmission-reception, data acquisition, and data storage-display and equipped with an analog measurement device. Lubrication films with thicknesses of 5 μm, 10 μm and 20 μm were tested on an analog measuring device. The results show that the ultrasonic film principle may be used to accurately measure the distribution of the lubrication films, the single point measurement error ranges are 0.2~1.1 μm, and the detection accuracy is the highest when the film thickness is as 5 μm.

Key words: mechanical seal, lubricant film distribution, ultrasonic testing, spring model

中图分类号: