[1]ANTUNES R A, OLIVEIRA M C L D, ANTUNES R A, et al. Materials Selection of Optimized Titanium Alloys for Aircraft Applications[J]. Materials Research, 2018, 21(2), DOI: 10.1590/1980-5373-mr-2017-0979.
[2]金和喜, 魏克湘, 李建明,等. 航空用钛合金研究进展[J]. 中国有色金属学报, 2015, 25(2):280-292.
JIN Hexi, WEI Kexiang, LI Jianming, et al. Research Development of Titanium Alloy Aerospace Industry[J]. The Chinese Journal of Nonferrous Metals, 2015, 25(2): 280-292.
[3]YU H J, YANG H, CHEN C Z. Progress in Surface Corrosion-resistance Coatings of Titanium and Its Alloys[J]. Key Engineering Materials, 2014, 591: 172-175.
[4]NIINOMI M. Mechanical Biocompatibilities of Titanium Alloys for Biomedical Applications.[J]. Journal of the Mechanical Behavior of Biomedical Materials, 2008, 1(1): 30-42.
[5]JAIN V K, ADSUL S G. Experimental Investigations into Abrasive Flow Machining (AFM)[J]. International Journal of Machine Tools & Manufacture, 2000, 40(7): 1003-1021.
[6]SINGH S, SANKAR M R, JAIN V K. Simulation and Experimental Investigations into Abrasive Flow Nanofinishing of Surgical Stainless Steel Tubes[J]. Machining Science & Technology, 2017(4): 1-22.
[7]李俊烨, 卫丽丽, 张心明,等. 介观尺度下磨粒流抛光温度对发动机喷油嘴质量影响研究[J]. 兵工学报, 2017, 38(10): 2010-2018.
LI Junye, WEI Lili, ZHANG Xinming, et al. Impact of Abrasive Flow Polishing temperature on Nozzle Quality under Mesoscopic Scale[J]. Acta Armamentarii, 2017, 38(10): 2010-2018.
[8]袁巧玲, 计时鸣, 文东辉,等. 基于改进的低雷诺数湍流模型的软性磨粒流加工仿真与实验[J]. 中国机械工程, 2014, 25(6): 800-807.
YUAN Qiaoling, JI Shiming, WEN Donghui, et al. Simulation and Experiment of Soft Abrasive Flow Machining Based on Improved Low-Reynolds-number Turbulence Model[J]. China Mechanical Engineering, 2014, 25(6): 800-807.
[9]计时鸣, 周龙兵, 谭大鹏. 软性磨粒流精密加工工艺参数优化方法[J]. 中国机械工程, 2013, 24(14): 1943-1950.
JI Shiming, ZHOU Longbing, TAN Dapeng. Optimization Method of Technological Parameters of Softness Abrasive Flow Precision Machining[J]. China Mechanical Engineering, 2013, 24(14): 1943-1950.
[10]计时鸣, 付有志, 谭大鹏. 软性磨粒流双入口约束流场数值分析及加工试验研究[J]. 机械工程学报, 2012, 48(19): 177-185.
JI Shiming, FU Youzhi, TAN Dapeng. Numerical Analysis and Processing Experiment of Double-inlet Restraint Flow Field in the Soft Abrasive Flow Machining[J]. Journal of Mechanical Engineering, 2012, 48(19): 177-185.
[11]ZAREPOUR H, YEO S H. Single Abrasive Particle Impingements as a Benchmark to Determine Material Removal Modes in Micro Ultrasonic Machining[J]. Wear, 2012, 288: 1-8.
[12]TAN D P, JI S M, FU Y Z. An Improved Soft Abrasive Flow Finishing Method Based on Fluid Collision Theory[J]. International Journal of Advanced Manufacturing Technology, 2016, 85(5/8): 1261-1274.
[13]GEE M G, GANT A, ROEBUCK B. Wear Mechanisms in Abrasion and Erosion of WC/Co and Related Hardmetals[J]. Wear, 2007, 263: 137-148.
[14]GORANA V K, JAIN V K, LAL G K. Prediction of Surface Roughness during Abrasive Flow Machining[J]. International Journal of Advanced Manufacturing Technology, 2006, 31(3/4): 258-267.
[15]GRANT G, TABAKOFF W. Erosion Prediction in Turbomachinery Resulting from Environmental Solid Particles[J]. Journal of Aircraft, 2012, 12(5): 471-478.
[16]OKA Y I, OKAMURA K, YOSHIDA T. Practical Estimation of Erosion Damage Caused by Solid Particle Impact: Part 1: Effects of Impact Parameters on a Predictive Equation[J]. Wear, 2005, 259:95-101.
[17]OKA Y I, YOSHIDA T. Practical Estimation of Erosion Damage Caused by Solid Particle Impact: Part 2: Mechanical Properties of Materials Directly Associated with Erosion Damage[J]. Wear, 2005, 259: 102-109.
[18]ZHANG L, WANG J S, TAN D P, et al. Gas Compensation-based Abrasive Flow Processing Method for Complex Titanium Alloy Surfaces[J]. International Journal of Advanced Manufacturing Technology, 2017, 92(9/12): 3385-3397. |