[1]XI Y. Parametric Design of Reverse Blowing Pickup Mouth Based on Flow Simulation[J]. Journal of Information & Computational Science, 2015, 12(6):2165-2175.
[2]ZHANG Yicheng, YANG Chunchao, BAKER C, et al. Effects of Expanding Zone Parameters of Vacuum Dust Suction Mouth on Flow Simulation Results[J]. Journal of Central South University, 2014, 21(6):2547-2552.
[3]OUYANG Z, ZHANG Y, JIA G, et al. Flow Properties of Dust Suction Mouth with Curled Edges[J]. Mechanical Science & Technology for Aerospace Engineering, 2013, 32(3):362-366.
[4]高俊旭. 吸扫车吸嘴卷吸尘粒流动数值模拟及模糊灰色关联分析[D]. 长沙:湖南大学, 2016.
GAO Junxu. Numerical Investigations and Fuzzy Grey Relation Analysis of Nozzle Entrainment Particle Flow in Sweeping and Suction Vehicle[D]. Changsha: Hunan University, 2016.
[5]覃先云,肖庆麟,周枫林,等.扫路车吸嘴气固两相流仿真分析及其设计改进[J].应用力学学报, 2016, 33(1):73-79.
QIN Xianyun, XIAO Qinglin, ZHOU Fenglin, et al. Simulation Analysis and Design Improvement of Gas-solid Two-phase Flow in Sweeper[J]. Journal of Applied Mechanics, 2016, 33(1):73-79.
[6]郗元. 轻型扫路车反吹式吸嘴流动特性及吸尘效率优化研究[D]. 长春:吉林大学,2016.
XI Yuan. Study on the Flow Characteristics and Suction Efficiency Optimization of the Reverse Blow Suction Nozzle of Light Sweeper Truck [D]. Changchun: Jilin University, 2016.
[7]杨明红. 纯电动吸扫车整体设计及吸尘系统研究[D]. 淄博:山东理工大学, 2016.
YANG Minghong. Pure Electric Sweeper's Overall Design and Dust Collecting System Research [D]. Zibo: Shandong University of Technology, 2016.
[8]刘玉波, 赵灿, 冯明军. 基于正交试验法的高速铣削工艺参数优化设计[J]. 组合机床与自动化加工技术, 2008(9):68-71.
LIU Yubo, ZHAO Can, FENG Mingjun. Optimum Design of High Speed Milling Process Parameters Based on Orthogonal Experimental Method[J]. Modular Machine Tool and Automatic Machining Technology, 2008(9): 68-71.
[9]李华标, 吴晓明, 吕智. 基于回归正交试验的旋风分离器结构优化研究[J]. 机电技术,2018(2):16-21.
LI Huabiao, WU Xiaoming, LYU Zhi.Structural Optimization of Cyclone Separator Based on Regression Orthogonal Test[J].Electromechanical Technology, 2018(2):16-21.
[10]吴晓. 气固两相流能耗特性的试验研究[J]. 广西大学学报(自然科学版), 2009, 34(1):78-81.
WU Xiao.Experimental Study on Energy Consumption Characteristics of Gas-solid Two-phase Flow[J].Journal of Guangxi University (Natural Science Edition), 2009,34(1): 78-81.
[11]唐贤进, 张丘, 邹刚,等. 基于径向基函数神经网络的高聚物粘结炸药切削表面粗糙度预测研究[J]. 兵工学报, 2014, 35(2):200-206.
TANG Xianjin, ZHANG Qiu, ZOU Gang, et al. Prediction Research on Cutting Surface Roughness of PBX Based on RBF Neural Network[J]. Acta Armamentarii, 2014, 35(2):200-206.
[12]张任, 胥芳, 陈教料,等. 基于PSO-RBF神经网络的锂离子电池健康状态预测[J]. 中国机械工程, 2016, 27(21):2975-2981.
ZHANG Ren, XU Fang, CHEN Jiaoliao, et al. Li-ion Battery SOH Prediction Based on PSO-RBF Neural Network[J]. China Mechanical Engineering, 2016, 27(21): 2975-2981.
[13]刘卫, 孙晓霞, 沈瑞琪, 等. 加速度峰值RBF神经网络预测[J]. 南京理工大学学报, 2013, 37(5):761-765.
LIU Wei, SUN Xiaoxia, SHEN Ruiqi, et al. Prediction of Acceleration Peak Based on Radial Basis Function Network[J]. Journal of Nanjing University of Science and Technology, 2013, 37(5):761-765.
[14]樊兆峰, 马小平, 邵晓根. 非线性系统RBF神经网络多步预测控制[J]. 控制与决策, 2014(7):1274-1278.
FAN Zhaofeng, MA Xiaoping, SHAO Xiaogen. RBF Neural Network Multi-step Predictive Control for Nonlinear Systems. [J]. Control and Decision, 2014(7):1274-1278.
[15]ATIEH M, GHARABAGHI B, RUDRA R. Entropy-based Neural Networks Model for Flow Duration Curves at Ungauged Sites[J]. Journal of Hydrology, 2015, 529:1007-1020.
[16]ADEWOLE A C, TZONEVA R, BEHARDIEN S. Distribution Network Fault Section Identification and Fault Location Using Wavelet Entropy and Neural Networks[J]. Applied Soft Computing, 2016, 46(C):296-306.
[17]邓乾旺, 文文. 基于拉丁超立方抽样的薄板装配误差分析[J]. 中国机械工程, 2012, 23(8):947-951.
DENG Qianwang, WEN Wen. Error Analysis of Thin Plate Assembly Based on Latin Hypercube Sampling[J]. China Mechanical Engineering, 2012, 23(8): 947-951.
[18]郗元, 成凯, LI Guangxian,等. 扫路车反吹式吸嘴运行参数的CFD分析[J]. 中南大学学报(自然科学版), 2016, 47(4):1144-1150.
ZHENG Yuan, CHENG Kai, LI Guangxian, et al. CFD Analysis of Operating Parameters of Back-blown Suction Nozzle of Road Sweeper[J]. Journal of Central South University (Natural Science Edition), 2016, 47 (4): 1144-1150.
[19]WANG Y, ZHOU W, DONG D, et al. Estimation of Random Vibration Signals with Small Samples Using Bootstrap Maximum Entropy Method[J]. Measurement, 2017, 105:45-55.
[20]WU Bofu, MEN Jinlai, CHEN Jie. Numerical Study on Particle Removal Performance of Pickup Head for a Street Vacuum Sweeper[J]. Powder Technology, 2010, 200(1):16-24.
[21]舒绍文, 邓亚东, 苏楚奇, 等. 吸嘴结构参数与吸尘性能间的参数关系挖掘[J]. 武汉理工大学学报(交通科学与工程版), 2018, 42(2):268-273.
SHU Shaowen, DENG Yadong, SU Chuqi, et al. Excavation of Parameters Relationship between Suction Nozzle Structure Parameters and Dust Collection Performance[J]. Journal of Wuhan University of Technology (Transportation Science & Engineering) 2018, 42(2):268-273.
[22]XIN Y H, LI H, WU J J. Applications of CFD Technique in the Flow Field Analysis of Road Sweeper[J]. Applied Mechanics & Materials, 2015, 733:583-586. |