卧式HMC500主轴系统热特性分析及结构优化

摘要/Abstract

摘要： 以HMC500主轴系统的特有结构为研究对象，建立主轴系统的温度场模型。实验结果表明，主轴系统热变形与温度有较好的对应关系，主轴发热量增大引起主轴变形增大，而主轴轴承的摩擦生热是主轴系统热量产生的重要原因，主轴系统的最高温升位于前轴承内圈处。进一步仿真计算主轴系统的热变形，通过对主轴箱体散热凹面的优化设计，可有效降低主轴系统温升，使主轴系统的热变形达到最小，从而使关键部位变形小于10 μm，满足机床的设计要求。在优化后的主轴箱系统上布置温度传感器和位移传感器，在8 000 r/min转速下进行实时测量，将实验结果与ANSYS的模拟结果进行对比，验证了优化结构的可行性与可靠性。

关键词: 主轴系统, 热分析, 热变形, 优化设计

Abstract: Taking the unique structure of the HMC500 spindle systems as the research object， the temperature field model of the spindle systems was established. It is found that the thermal deformations of the spindle systems have a good correspondence with the temperatures. Spindle deformation increases are caused by spindle heat increases. The spindle bearing friction heats are an important reason for the heat generated by the spindle systems. The experimental results show that the maximum temperature rise of the spindle systems is located in the inner rings of the front bearings. The thermal deformations of the spindle systems were further calculated， and the optimal design of the cooling surface of the spindle boxex could reduce the temperature rise of the spindle systems effectively， so that the thermal deformations of the spindle systems could be minimized， so that the key part is less than 10 μm， which may meet the design claims of the machine. On the spindle box system of the optimized arrangement of temperature sensors and displacement sensors， the real-time measurements were carried out under the speed of 8000 r/min. The experimental results were compared with the simulation ones of ANSYS to verify the feasibility and reliability of the optimized structure.

Key words: spindle system, thermal analysis, thermal deformation, optimal design

中图分类号:

TG502.15

吴永伟;邬再新;鲍政伟. 卧式HMC500主轴系统热特性分析及结构优化[J]. 中国机械工程.

WU Yongwei;WU Zaixin;BAO Zhenwei. Thermal Characteristics Analysis and Structural Optimization of Horizontal HMC500 Spindle Systems[J]. China Mechanical Engineering.

导出引用管理器 EndNote|Ris|BibTeX

链接本文: http://www.cmemo.org.cn/CN/

http://www.cmemo.org.cn/CN/Y2018/V29/I13/1596

参考文献

[1]WECK M，MCKEOWN P， BONSE R. Reduction and Compensation of Thermal Error in Machine Tools[J］.Annals of CIRP，1995，44（2）：589-598.
[2]焦瑶，孙立剑，洪海波，等.超精密光学磨床减小热误差的结构优化[J］.机械工程学报，2015，51（1）：167-175.
JIAO Yao， SUN Lijian， HONG Haibo， et al. Material Thermal Conductivity Determination and Structural Optimization of Ultra-precision Optical Machine Tool[J］. Journal of Mechanical Engineering， 2015，51（1）：167-175.
[3]LIANG Ruijun，YE Wenhua，YANG Qifan， et al. The Thermal Error Optimizaton Models for CNC Machine Tools[J］.The International Journal of Advanced Manufacturing Technology，2012，63（9/12）：1167-1176.
[4]应杏娟，李郝林.数控机床主轴系统热特性有限元分析[J］.工具技术，2010，44（1）：38-40.
YING Xingjuan， LI Haolin. CNC Machine Tool Spindle System Finite Element Analysis of Thermal Characteristics of Technology[J］. Tool Engineering, 2010， 44（1）： 38-40.
[5]郭策，孙庆鸿.高速高精度数控车床主轴系统的热特性分析及热变形计算[J］.东南大学学报（自然科学版），2005，35（2）：231-234.
GUO Ce， SUN Qinghong. Calculation of Thermal Characteristics and Thermal Deformation Analysis of High Speed Spindle System of NC Precision Lathe [J］. Journal of Southeast University （Natural Science Edition）， 2005，35 （2）： 231-234.
[6]RAMESH R，MANNAN M A．Error Compensation in Machine Tools a Review PartⅡ：Thermal Errors[J］．International Journal of Machine Tools ＆ Manufacture，2000，40（9）：1257-1284．
[7]王金生．XK717数控铣床热特性研究[D］．杭州：浙江工业大学，2004．
WANG Jinsheng. The Study of Thermal Characteristics of XK717 CNC Milling Machine[D］. Hangzhou： Zhejiang University of Technology， 2004.
[8]HARRIS T， ROLLINGD A. Bearing Analysis[M］.New York： John Wiley & Sons，Inc，2001.
[9]张彬．铣车复合加工中心整机热特性分析研究[D］．兰州：兰州理工大学，2014．
ZHANG Bin. Study on the Thermal Characteristics of Milling Machining Center[D］. Lanzhou： Lanzhou University of Technology， 2014.
[10]肖利利．大型龙门加工中心结构优化设计及快速仿真平台开发[D］．南京：南京航空航天大学，2011．
XIAO Lili. Optimize the Structure of Longmen Large Machining Center Design and Fast Simulation Platform[D］. Nanjing： Nanjing University of Aeronautics & Astronautics， 2011.
[11]杨世铭，陶文铨.传热学[M］.3版.北京：高等教育出版社，1998.
YANG Shiming， TAO Wenquan. Heat Transfer[M］. 3ed. Beijing： Higher Education Press， 1998.
[12]CHEN T Y，WEI W J，TSAI J C．Optimum Design of Headstocks of Precision Lathes[J］．International Journal of Machine Tools＆Manufacture，1999，39（12）：1961-1977．
[13]梁允奇．机械制造中的传热与热变形基础[M］．北京：机械工业出版社，1982．
LIANG Yunqi. Heat Transfer and Thermal Deformation in Mechanical Manufacturing[M］. Beijing： China Machine Press， 1982.
[14]黄志新．ANSYS Workbench 16.0超级学习手册[M］．北京：人民邮电出版社，2016.
HUANG Zhixin. ANSYS， Workbench 16 Super Learning Manual [M］. Beijing： Posts & Telecom Press， 2016.
[15]康子雄，位文明，李旸，等.侧挂式主轴系统热特性仿真分析[J］.机械工程与自动化，2011，10（5）：1-3.
KANG Zixiong， WEI Wenming， LI Yang， et al. The Side Hung Simulation System of Thermal Characteristics of Spindle Type [J］. Analysis of Mechanical Engineering and Automation， 2011，10 （5）： 1-3.