一种表面结构多尺度融合测量系统

中国机械工程

一种表面结构多尺度融合测量系统

王生怀1, 2;徐风华1;陈育荣1;谢铁邦2

1.湖北汽车工业学院机械工程学院，十堰，442002
2.华中科技大学机械科学与工程学院，武汉，430074

出版日期:2018-03-25 发布日期:2018-03-21
基金资助:
国家自然科学基金资助项目(51275159，51475150)；
国家留学基金资助项目(201308420014)；
中国博士后科学基金资助项目(2011M501199)；
湖北省自然科学基金资助项目(2013CFB045)
National Natural Science Foundation of China （No. 51275159，51475150）
International Graduate Scholarship（No. 201308420014）
China Postdoctoral Science Foundation（No. 2011M501199）
Hubei Provincial Natural Science Foundation of China （No. 2013CFB045）

A Kind of Multi-scale Integration Measurement System for Surface Textures

WANG Shenghuai1, 2;XU Fenghua1;CHEN Yurong1;XIE Tiebang2#br#

1.School of Mechanical Engineering,Hubei University of Automotive Technology,Shiyan,Hubei,442002
2.School of Mechanical Science and Engineering,Huazhong University of Science and Technology,Wuhan,430074

Online:2018-03-25 Published:2018-03-21
Supported by:
National Natural Science Foundation of China （No. 51275159，51475150）
International Graduate Scholarship（No. 201308420014）
China Postdoctoral Science Foundation（No. 2011M501199）
Hubei Provincial Natural Science Foundation of China （No. 2013CFB045）

摘要/Abstract

摘要： 提出了一种表面结构多尺度融合测量系统，该系统将显微图像测量、垂直扫描白光干涉测量、白光干涉纳米探针测量和白光干涉金刚石探针测量等多种不同尺度的表面结构测量方法融合在一起。实验结果表明，显微图像测量对300μm标准玻璃线纹尺的示值误差为-0.251μm，标准偏差为0.4013μm；白光干涉测量对1.26μm和3.33μm单刻线样板的测量平均值分别为1.263μm 和3.328μm，示值误差分别为0.003μm和 -0.002μm，示值相对变化量为1.27%和0.63%；白光干涉纳米探针对高度为（106.8±1.0）nm的校准光栅测量平均值为103.1nm，相对示值误差为-3.5%；白光干涉金刚石探针测量对Ra=4.08μm样板的测量值为4.05μm，测得值的相对误差为0.74％。所提出的测量系统满足表面结构的多尺度融合测量要求。

关键词: 表面结构, 多尺度, 融合测量, 纳米探针

Abstract: A multi-scale integration measurement system was presented. Different scale measurement methods were integrated, such as microscopic image measurement, vertical scanning white light interferometry measurement, nano-probe measurement by white light interferometry and diamond probe measurement by white light interferometry. The measurement results show that in microscopy image measurement for standard glass thread ruler of 300μm, the indication error is as -0.251μm and the standard deviation is as 0.403μm. In white light interferometry for single engraved templates of 1.26μm and 3.33μm, the mean measurements are as 1.263μm and 3.328μm, indication errors are as 0.003μm and -0.002μm，the relative change of indication are as 1.27% and 0.63% respectively. In nano-probe measurement by white light interferometry for calibration grating of (106.8±1.0)nm, the mean is as 103.1nm and the relative error is as -3.5%; in diamond probe measurement by white light interferometry for standard template of Ra=4.08μm, the measurement Ra is as 4.05μm and the relative error is as 0.74％. The introduced system may satisfy the measurement needs and realize the multi-scale integration measurement for surface textures.

Key words: surface texture, multi-scale, integration measurement, nano-probe

中图分类号:

TH741.3

王生怀1, 2;徐风华1;陈育荣1;谢铁邦2. 一种表面结构多尺度融合测量系统[J]. 中国机械工程.

WANG Shenghuai1, 2;XU Fenghua1;CHEN Yurong1;XIE Tiebang2. A Kind of Multi-scale Integration Measurement System for Surface Textures[J]. China Mechanical Engineering.

参考文献

[1]JIANG X, SCOTT P J, WHITEHOUSE D J, et al. Paradigm Shifts in Surface Metrology. Part I. Historical Philosophy[J]. Proceedings Mathematical Physical & Engineering Sciences, 2007, 463(2085):2049-2070.
[2]JIANG X, SCOTT P J, WHITEHOUSE D J, et al. Paradigm Shifts in Surface Metrology. Part II. the Current Shift[J]. Proceedings Mathematical Physical & Engineering Sciences, 2007, 463(2085):2071-2099.
[3]HU Z M, DEAN T A. A Study of Surface Topography, Friction and Lubricants in Metalforming[J]. International Journal of Machine Tools & Manufacture, 2000, 40(11):1637-1649.
[4]CLARK S R, GREIVENKAMP J E. Ball Tip-stylus Tilt Correction for a Stylus Profilometer[J]. Precision Engineering, 2002, 26(4):405-411.
[5]CHU C L, LIN C H, FAN K C. Two-dimensional Optical Accelerometer Based on Commercial DVD Pick-up Head[J]. Measurement Science & Technology, 2007, 18(1):265-274.
[6]FAN K C, CHEN L C, LIN C D, et al. Development of Dynamic 3-D Surface Profilometry Using Stroboscopic Interferometric Measurement and Vertical Scanning Techniques[J]// Journal of Physics Conference Series, 2007，13(1):51-54.
[7]SCHMIT J, OLSZAK A. High-precision Shape Measurement by White-light Interferometry with Real-time Scanner Error Correction[J]. Applied Optics, 2002, 41(28):5943-5950.
[8]LI J, TOTH M, TILELI V, et al. Evolution of the Nanostructure of Deposits Grown by Electron Beam Induced Deposition[J]. Applied Physics Letters, 2008, 93(2):619.
[9]JOBIN M, FOSCHIA R. Improving the Resolution of Interference Microscopes[J]. Measurement, 2008, 41(8):896-903.
[10]LEACH R. Some Issues of Traceability in the Field of Surface Topography Measurement[J]. Wear, 2004, 257(12):1246-1249.
[11]LEACH R, CHETWYND D, BLUNT L, et al. Recent Advances in Traceable Nanoscale Dimension and Force Metrology in the UK[J]. Measurement Science & Technology, 2006, 17(3):467-476.
[12]YUN J P, CHANG S P, XIE T B, et al. A Novel Contact and Non-contact Hybrid Profilometer[J]. Precision Engineering, 2009, 33(2):202-208.
[13]WANG S Z，XIE T B，CHANG S P. A White Light Interference-based Atomic Force Probe Scanning Microscopy [J]. Measurement Science & Technology, 2011, 22 (4): 045502.
[14]王淑珍，谢铁邦，常素萍.复合型超精密表面形貌测量仪[J]. 光学精密工程,2011, 19(4):828-835.
WANG Shuzhen，XIE Tiebang，CHANG Suping. Combined Profilometer for Ultra-precision Surface Topography[J]. Optics and Precision Engineering, 2011,19(4):828-835.
[15]杨练根，何浪，王选择，等. 波长轮换与相移扫描相结合的表面形貌测量系统[J].光学精密工程,2015,23(9):2466-2472.
YANG Liangen, HE Lang, WANG Xuanze, et al. Surface Topography Measuring System Based on Wavelength Switching and Phase Shift Scanning[J].Optics and Precision Engineering,2015,23(9):2466-2472.
[16]崔长彩，余卿，张遨，等.金刚石砂轮表面形貌测量系统[J].光学精密工程,2014,22(12):3167-3174.
CUI Changcai, YU Qing, ZHANG Ao, et al. Measurement System of Surface Topography for Diamond Grinding Wheel[J]. Optics and Precision Engineering, 2014,22(12):3167-3174.
[17]王生怀,陈育荣,王淑珍,等.三维精密位移系统的设计[J].光学精密工程,2010,18(1):175-182.
WANG Shenghuai, CHEN Yurong, WANG Shuzhen,et al. Design of 3D Precision Displacement System[J]. Optics and Precision Engineering, 2010, 18(1):175-182.
[18]王生怀，徐风华，陈育荣，等.基于三维精密位移工作台的显微图像拼接测量系统[J].机械设计与制造，2012(2):70-72.
WANG Shenghuai, XU Fenghua, CHEN Yurong, et al. A Microscopy Image Stitching Measurement System Based on 3D Displacement Worktable[J]. Machinery Design ＆Manufacture，2012(2):70-72.