[1]廖君. 基于有限元法的汽车接头刚度仿真分析[J]. 现代零部件, 2008(10):82.
LIAO Jun. Simulation Analysis of Automobile Joint Stiffness Based on Finite Element Method[J]. Modern Components, 2008(10):82.
[2]宋凯, 成艾国, 钟志华. 基于响应面法的汽车车身T型接头优化[J]. 汽车工程, 2011, 33(4):283-289.
SONG Kai, CHENG Aiguo, ZHONG Zhihua. The Optimization of T-joint in Vehicle Body Based on Response Surface Method[J]. Automotive Engineering, 2011, 33(4):283-289.
[3]HUANG S. General Torsional Stiffness Matching of Off-road Vehicle[J]. Chinese Journal of Mechanical Engineering, 2009, 22(3):331-335.
[4]丁玉庆, 马幼鸣. 轿车车身强度及刚度有限元分析[J]. 解放军理工大学学报(自然科学版), 2012, 13(3):320-323.
DING Yuqing, MA Youming. Finite Element of Strength and Stiffness of Car Body[J]. Journal of PLA University of Science and Technology(Natural Science Edition),2012, 13(3):320-323.
[5]程志伟, 叶志刚, 宋俊. 轿车白车身弯扭刚度实验和仿真对比[J]. 汽车工程师, 2011(2):36-39.
CHENG Zhiwei, YE Zhigang, SONG Jun. Static Bending and Torsion Stiffness Test and Simulate Comparison for Car BIW[J]. Auto Engineer, 2011(2):36-39.
[6]李帅, 金鹏.车身刚度CAE分析和实验方法的研究[C]// 2015中国汽车工程学会年会论文集.上海, 2015:1496-1502.
LI Shuai, JIN Peng. Research on the Stiffness of the Body[C]// Annual Meeting of China Society of Automotive Engineering.Shanghai,2015:1496-1502.
[7]梁晨, 王国林, 杨建,等. 基于最少约束方法的汽车车身静刚度实验[J]. 汽车工程, 2015, 37(10):1202-1207.
LIANG Chen,WANG Guolin, YANG Jian, et al. Static Stiffness Testing of Vehicle Body with Minimum Constraint Method[J]. Automotive Engineering, 2015, 37(10): 1202-1207.
[8]NIKOLAIDIS E, ZHU M. Design of Automotive Joints: Using Neural Networks and Optimization to Translate Performance Requirements to Physical Design Parameters[J]. Computers & Structures, 1996, 60(6):989-1001.
[9]黄金陵, 娄永强, 龚礼洲. 轿车车身结构概念模型中接头的模拟[J]. 机械工程学报, 2000, 36(3):78-81.
HUANG Jinling, LOU Yongqiang,GONG Lizhou, et al. Joint Modeling Methond in the Concept Model of Car Body Structure[J]. Chinese Journal of Mechanical Engineering, 2000, 36(3):78-81.
[10]迟瑞丰, 侯文彬, 胡平. 接头在车身结构概念设计阶段对刚度的影响[J]. 机械设计与制造, 2009(11):180-181.
CHI Ruifeng, HOU Wenbin, HU Ping, et al. Influence that Joints Devote to Stiffness at the Phase of Automotive Body Structure Concept Design[J]. Machinery Design & Manufacture, 2009(11):180-181.
[11]SPENCER C, VARTANIAN K, WHITE M, et al. Light Truck Frame Joint Stiffness Study[J]. SAE Technical Papers,2003-01-0241. |