基于灵敏度权重的双摆角铣头传动精度定量分配

中国机械工程

基于灵敏度权重的双摆角铣头传动精度定量分配

吴凤和;李永欣;李树枝;李少辉

燕山大学机械工程学院，秦皇岛，066004

出版日期:2017-11-25 发布日期:2017-11-23
基金资助:
国家自然科学基金资助项目 (51405427)；
国家科技重大专项 (2013ZX04001-041)；
河北省自然科学基金资助项目（E2017203372）；
内燃机可靠性国家重点实验室开放课题（skler-201701）
National Natural Science Foundation of China （No. 51405427）
National Science and Technology Major Project（No. 2013ZX04001-041）
Hebei Provincial Natural Science Foundation of China （No. E2017203372）

Transmission Accuracy Quantitative Distribution of Biaxial Rotary Milling Heads Based on Sensitivity Weights

WU Fenghe;LI Yongxin;LI Shuzhi;LI Shaohui

College of Mechanical Engineering,Yanshan University，Qinhuangdao,Hebei，066004

Online:2017-11-25 Published:2017-11-23
Supported by:
National Natural Science Foundation of China （No. 51405427）
National Science and Technology Major Project（No. 2013ZX04001-041）
Hebei Provincial Natural Science Foundation of China （No. E2017203372）

摘要/Abstract

摘要：

针对基于行星减速机构的双摆角铣头传动部分结构复杂，传动误差影响因素众多，导致传动精度分配困难的问题，提出了一种灵敏度计算与加权分配相结合的传动精度定量分配方法。首先建立双摆角铣头传动链的误差模型，根据其定位精度要求和传动误差分析结果确定总传动误差允许值；然后根据各传动误差项对总传动误差影响的灵敏度值，筛选出对传动精度影响较大的误差项，并对其灵敏度值进行归一化处理；最后对较大误差项进行加权分配，得到符合精度设计要求的16种精度分配方案，进而选出满足经济性要求的方案。该方法推导过程物理意义明确，操作性强，可避免低灵敏度误差项对精度分配的干扰，提高了精度分配效率，对多误差复杂系统的精度优化分配具有指导意义。

关键词: 精度分配, 双摆角铣头, 灵敏度权重, 比例加权方法

Abstract:

A biaxial rotary milling head with planetary gear reducer possessed complicated transmission systems and multiple transmission errors, which might cause difficulties in the transmission accuracy distribution. A new method of accuracy quantitative distribution was proposed based on sensitivity analysis and proportional weight method. Firstly, the transmission chain error model of the biaxial rotary milling heads was established and the total transmission errors were determined by the positioning accuracy requirements and transmission error analysis. Then, the errors which had greater influence on the transmission accuracy were filtered by sensitivity values. At last, the normalized weighted method was applied to distribute proportionally the errors with larger sensitivity to meet the requirements of accuracy design. And sixteen feasible error distribution schemes were gotten. The method has clear physical expression, high maneuverability and improves the accuracy design efficiency, which may lay a foundation for the accuracy distribution of the complex systems with multiple error factors.

Key words: accuracy distribution, biaxial rotary milling head, weight of sensitivity, proportional weight method

中图分类号:

吴凤和;李永欣;李树枝;李少辉. 基于灵敏度权重的双摆角铣头传动精度定量分配[J]. 中国机械工程.

WU Fenghe;LI Yongxin;LI Shuzhi;LI Shaohui. Transmission Accuracy Quantitative Distribution of Biaxial Rotary Milling Heads Based on Sensitivity Weights[J]. China Mechanical Engineering.

参考文献

[1]YANG Q D，LIU G Q，WANG K S H. Dynamics Analysis of Special Structure of Milling-head Machine tool[J].Chinese Journal of Mechanical Engineering, 2008,21 (6):103-107.
[2]HU S W, YANG Q D，PENG B Y，et al. Direct-drive Bi-Rotary Milling Head Variable Load Thermal Characteristics Analysis[J]. AASRI Procedia，2012(3)：270–276.
[3]吴凤和, 李树枝, 李少辉,等. 行星齿轮传动式A/C双摆角铣头: 中国，CN201510564197.6[P]. 2015-11-25.
WU Fenghe, LI Shuzhi, LI Shaohui, et al. Planetary Gear Transmission Type A/C Double-swing-angle Milling Head: China, CN201510564197.6 [P]. 2015-11-25.
[4]CHEN E P，LI S H，WU F H. Structure Design of Biaxial Rotary Milling Head with High-torque, High-precision and Mechanical Spindle[J]. Key Engineering Materials，2014，621：337-345.
[5]尚磊云, 唐硕. 基于方差分析的Monte-Carlo制导精度分配方法研究[J]. 飞行力学，2009，27(3):93-96.
SHANG Leiyun, TANG Shuo. Research on the Guidance Precision Distribution Method Based on the Variance Analysis[J]. Flight Dynamics, 2009, 27(3): 93-96.
[6]KUMAR M S, STALIN B. Optimum Tolerance Synthesis for Complex Assembly with Alternative Process Selection Using Lagrange Multiplier Method[J]. The International Journal of Advanced Manufacturing Technology,2009，44(3/4):405-411.
[7]CHEN G D, LIANG Y C , SUN Y Z,et al.Volumetric Error Modeling and Sensitivity Analysis for Designing a Five-axis Ultra-precision Machine Tool[J].The International Journal of Advanced Manufacturing Technology,2013,68 (9):2525-2534.
[8]CHENG Q, ZHAO H W, ZHANG G J,et al. An Analytical Approach for Crucial Geometric Errors Identification of Multi-axis Machine Tool Based on Global Sensitivity Analysis[J]. The International Journal of Advanced Manufacturing Technology, 2014,75(1):107-121.
[9]ZHANG X F, ZHANG Y M, MAHESH D P. Global Sensitivity Analysis of a CNC Machine Tool: Application of MDRM[J].The International Journal of Advanced Manufacturing Technology, 2015,81(1):159-169.
[10]余治民, 刘子建, 艾彦迪,等. 大型数控龙门导轨磨床几何误差建模与基于可靠性理论的精度分配[J]. 机械工程学报,2013, 49（17）:142-151.
YU Zhimin, LIU Zijian, AI Yandi, et al. Geometric Error Model and Precision Distribution Based on Refiabifity Theory for Large CNC Gantry Guideway Grinder[J]. Journal of Mechanical Engineering, 2013,49（17）:142-151.
[11]HUANG Q, ZHANG G B. Precision Design for Machine Tool Based on Error Prediction[J].Chinese Journal of Mechanical Engineering, 2013，26(1):151-157.
[12]王海艳, 秦旭达. 螺旋铣孔主轴单元的精度分配[J]. 中国机械工程,2014, 25(20):2729-2734.
WANG Haiyan, QIN Xuda. Tolerance Allocation of a Helical Milling Spindle Unit[J]. China Mechanical Engineering, 2014, 25(20): 2729-2734.
[13]金增楠, 王军, 吴文嘉, 等.基于遗传算法与灵敏度分析的误差分配方法研究[J].组合机床与自动化加工技术，2015(6):44-48.
JIN Zengnan, WANG Jun, WU Wenjia, et al. Research on Method of Error Distribution Based on Genetic Algorithm and Sensitivity Analysis[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2015(6):44-48.
[14]吕程,刘子建. 基于JSS矩阵的装配精度分配方法[J]. 中国机械工程,2016,27(2):149-155.
LYU Cheng, LIU Zijian. Assembly Accuracy Allocation Method Based Oil JSS Matrix[J]. China Mechanical Engineering, 2016, 27(2): 149-155.
[15]ZUO X Y, LI B Z, YANG J G. Error Sensitivity Analysis and Precision Distribution for Multi-operation Machining Processes Based on Error Propagation
Model[J]. The International Journal of Advanced Manufacturing Technology, 2016,86(1):269-280.
[16]WU S M, NI J. Precision Machining without Precise Machinery[J].Annals of the CIRP,1989,38 (1):533-536.
[17]WECK M, MCKEOWN P, BONSE R,et al. Reduction and Compensation of Thermal Errors in Machine Tools[J]. Annals of the CIRP, 1995,44 (2): 589-598.
[18]崔岗卫, 高栋, 姚英学. 重型数控机床热误差的分离与建模[J]. 哈尔滨工业大学学报，2012，44 (9)：51-56.
CUI Gangwei, GAO Dong, YAO Yingxue.Thermal Error Separating and Modeling for Heavy-duty CNC Machine Tools[J]. Journal of Harbin Institute of Technology, 2012,44(9): 51-56.
[19]李西建.大扭矩高精度大传动比传动系统精度分析和设计仿真[D]. 秦皇岛：燕山大学, 2004.
LI Xijian. Precision Analysis and Design Simulation of Drive System with High Torque High Precision and Large Transmission Ratio[D]. Qinhuangdao: Yanshan University, 2004.