基于边等距偏移的环切加工刀具路径生成方法

中国机械工程

基于边等距偏移的环切加工刀具路径生成方法

潘海鸿1，2;甘霖1;俞宗薏1;陈琳1，2

1.广西大学机械工程学院，南宁,530004
2.广西制造系统与先进制造技术重点实验室，南宁,530004

出版日期:2017-02-25 发布日期:2017-02-24
基金资助:
国家自然科学基金资助项目(51465005);
广西科技攻关项目(桂科转1599002-16);
广西制造系统与先进制造技术重点实验室项目(14-045-15S09)

Contour-parallel Tool Path Generation Method Based on Pair-wise Offset

PAN Haihong1, 2 ;GAN Lin1;YU Zongyi1;CHEN Lin1, 2

1.College of Mechanical Engineering,Guangxi University,Nanning，530004
2.Guangxi Key Laboratory of Manufacturing System & Advanced Manufacturing Technology,Nanning，530004

Online:2017-02-25 Published:2017-02-24

摘要/Abstract

摘要： 针对由直线和圆弧组成的封闭轮廓生成环切加工刀具路径的问题，提出了一种基于边等距偏移的环切加工刀具路径生成方法。该方法分别从封闭轮廓的凸点和干涉凹点出发，结合边干涉检测程序和圆弧边分段处理方法对包含直线和圆弧的轮廓分别进行局部和全局无效区域检测，删除轮廓的无效区域后进行等距偏移，生成无干涉环切加工路径。利用自主开发的CAD/CAM软件实现了该方法，仿真实验结果表明，该方法能够准确、有效地生成无干涉区域的刀具加工路径，同时适用于带有孤岛的封闭轮廓偏移。

关键词: 等距偏移, 环切, 无效区域, 干涉检测

Abstract: A contour-parallel tool path generation method was proposed based on pair-wise offset to solve the problems of generating contour-parallel tool paths, which were composed of lines and arcs. The convex vertex and interfering concave vertex of closed contour were used as a start point respectively, and the local and global invalid areas of contour including lines and arcs were identified respectively with the method combining pair-wise-interference-detection(PWID) procedures and arc segmentation processing. Non-interference contour-parallel tool path was generated by offsetting the closed contour without invalid area. The proposed method was realized in the self-developed CAD/CAM software. The simulation results show that the tool path without interference area may be generated accurately and effectively with the proposed method, and may be applied to closed contours with islands as well.

Key words: pair-wise offset, contour-parallel, invalid area, interference-detection

中图分类号:

TP391

潘海鸿, 甘霖, 俞宗薏, 陈琳, . 基于边等距偏移的环切加工刀具路径生成方法[J]. 中国机械工程.

PAN Haihong, , GAN Lin, YU Zongyi, CHEN Lin, . Contour-parallel Tool Path Generation Method Based on Pair-wise Offset[J]. China Mechanical Engineering.

参考文献

[1]李骏, 樊留群, 赵建华, 等. 基于区域划分的刀轨生成算法的研究[J]. 组合机床与自动化加工技术, 2014 (5): 123-126.
LI Jun, FAN Liuqun, ZHAO Jianhua, et al. Research about Generation Algorithm of Tool Path Based on Area Dividing[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2014 (5)：123-126.
[2]张鸣, 刘伟军, 李论. 复杂型腔环切清角加工刀轨生成方法[J]. 计算机集成制造系统, 2011, 17(11): 2399-2404.
ZHANG Ming, LIU Weijun, LI Lun. Sharp Corner Clean-up CPO Tool-path Generating Method for Complex Pocket[J]. Computer Integrated Manufacturing Systems, 2011, 17(11): 2399-2404.
[3]HANSEN A, ARBAB F. An Algorithm for Generating NC Tool Path for Arbitrary Shaped Pockets with Islands[J]. ACM Transactions on Graphics, 1992,11(2): 152-182.
[4]HELD M. Voronoi Diagrams and Offset Curves of Curvilinear Polygons[J]. Computer-Aided Design, 1998, 30(4): 287-300.
[5]MANSOR M S A, HINDUJA S, OWODUNNI O O. Voronoi Diagram-based Tool Path Compensations for Removing Uncut Material in 21/2D Pocket Machining[J]. Computer-Aided Design, 2006, 38(3): 194-209.
[6]CHOI B K, KIM B H. Die-cavity Pocketing via Cutting Simulation[J]. Computer-Aided Design 1997,29(12): 837-846.
[7]万健, 徐小媚, 叶晓华. 基于区间算术和四叉树消除偏置曲线自交算法的实现[J]. 计算机应用, 2005, 25(8): 1942-1943.
WAN Jian, XU Xiaomei, YE Xiaohua. Eliminating Local and Global Self-intersections of Offsets Based on Interval Arithmetic and Quad Trees [J]. Computer Applications, 2005, 25(8): 1942-1943.
[8]张嘉易, 郝永平, 刘伟军. 基于有效交叉点搜索的PS边界补偿重建算法[J]. 中国机械工程, 2007, 18(10): 1193-1196.
ZHANG Jiayi, HAO Yongping, LIU Weijun. Offset Boundary Reconstruction Algorithm Based on Valid Intersection Points Search[J]. China Mechanical Engineering, 2007, 18(10): 1193-1196.
[9]孙殿柱, 朱昌志, 崔传辉, 等. 基于三角网格曲面的环切粗加工刀轨生成算法[J]. 华中科技大学学报（自然科学版）, 2011 (6): 83-86.
SUN Dianzhu, ZHU Changzhi, CUI Chuanhui, et al. Triangular Mesh Surface-based Generation Algorithm of Contour-parallel Rough Tool-path[J]. Journal of Huazhong University of Science and Technology (Natural Science Edition), 2011 (6): 83-86.
[10]张小明, 王清辉, 王帅. 基于曲面凹凸特征的环切加工轨迹生成方法[J]. 组合机床与自动化加工技术, 2014(3): 134-136.
ZHANG Xiaoming, WANG Qinghui, WANG Shuai. Contour-parallel Tool Path Generation Based on Surface Concave and Convex Features[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2014 (3): 134-136.
[11]KALMANOVICH G, NISNEVICH G. Swift and Stable Polygon Growth and Broken Line Offset[J]. Computer-Aided Design 1998,30(11):847-852.
[12]ROHMFELD R F. IGB-offset for Plane Curves—Loop Removal by Scanning of Interval Sequences[J]. Computer Aided Geometric Design, 1998, 15(4): 339-375.
[13]CHOI B K, PARK S C. A Pair-wise Offset Algorithm for 2D Point-sequence Curve[J]. Computer-Aided Design, 1999, 31(12): 735-745.
[14]陈正鸣, 徐镇全. 一个多边形快速等距偏移方法[J]. 现代制造工程, 2005(12): 7-10.
CHEN Zhengming, XU Zhenquan. A Fast Method for Polygon[J]. Modern Manufacturing Engineering. 2005(12), 7-10.
[15]曹永生. 二维组合曲线的等距方法研究[D]. 南京：河海大学, 2006.
CAO Yongsheng. The Research on the Offsetting for 2D-compound Curves[D]. Nanjing:Hohai University, 2006.