[1]周圣丰,戴晓琴,郑海忠.激光熔覆与激光感应复合溶覆WC-Ni60A涂层的结构与性能特征[J].机械工程学报,2012,48(7): 113-118.
Zhou Shengfeng,Dai Xiaoqin,Zheng Haizhong. Characteristics on Structure and Properties of WC-Ni60A Coatings by Laser Cladding and Laser-induction Hybrid Cladding[J]. Journal of Mechanical Engineering, 2012, 48(7):113-118.
[2]Kwok C T, Leong K I, Cheng F T, et al. Microstructural and Corrosion Characteristics of Laser Surface-melted Plastics Mold Steels[J]. Materials Science & Engineering A, 2003, 357(1/2):94-103.
[3]高波.气囊抛光试验样机研制及其关键技术研究[D].哈尔滨:哈尔滨工业大学,2005.
[4]金明生.模具自由曲面气囊抛光机理及工艺研究[D].杭州:浙江工业大学,2010.
[5]曾晰.软固结磨粒气压砂轮设计方法及材料去除特性研究[D].杭州:浙江工业大学,2013.
[6]吕哲. 超声振动辅助磨料水射流抛光冲蚀机理和工艺技术研究[D]. 济南:山东大学, 2015.
[7]Puertas I, Luis C J. A Study of Optimization of Machining Parameters for Electrical Discharge Machining of Boron Carbide[J]. Materials & Manufacturing Processes, 2004, 19(6):1041-1070.
[8]Saikumar S, Shunmugam M S. Parameter Selection based on Surface Finish in High-speed End-milling Using Differential Evolution[J]. Mater.Manuf. Processes, 2006,21 (4): 341-347.
[9]Deng J. Introduction to Grey Systems Theory[J]. J. Grey Syst. 1989,1 (1): 1-24.
[10]Pan L K, Wang C C, Wei S L, et al. Optimizing Multiple Quality Characteristics via Taguchi Method-based Grey Analysis[J]. Journal of Materials Processing Technology, 2007, 182(1/3):107-116.
[11]Dewangan S, Gangopadhyay S, Biswas C K. Study of Surface Integrity and Dimensional Accuracy in EDM Using Fuzzy TOPSIS and Sensitivity Analysis[J]. Measurement, 2014, 63(3):364-376.
[12]Parr W C. Introduction to Quality Engineering: Designing Quality into Products and Processes[J]. Technometrics, 1989, 31(2):255-256.
[13]Yayla A Y, Yildiz A, zbek A. Fuzzy TOPSIS Method in Supplier Selection and Application in the Garment Industry[J]. Fibres & Textiles in Eastern Europe, 2012, 20(4):20-23.
[14]Richard F G. Response Surface Methodology, Process and Product Optimization Using Design Experiment[J]. Technometrics,1996, 38(3):284-286.
|