气缸冲击动力学建模与仿真分析

摘要/Abstract

摘要： 将气缸在行程末端的冲击问题看成一个由细长活塞杆、质量负载、活塞以及端盖组成的振动系统。首先应用弹性体的一维波动方程建立细长活塞杆纵向振动变形的数学模型，用模态叠加方法解析了冲击力、接触位移以及接触时间。然后利用非线性有限元软件LS-DYNA对气缸冲击过程进行数值仿真计算分析，详细研究了当驱动负载质量以及活塞初始冲击速度不同时，活塞冲击接触面接触合力和接触作用时间的变化情况。对比分析了理论解析解与LS-DYNA数值解，验证了解析解的准确性，得出了冲击力分别随速度和负载的变化规律；进一步对冲击振动响应进行了频率分析，并研究了气缸冲击力的变化原因。研究结果为气缸的设计和使用提供了理论和实际参考。

关键词: 气缸冲击力, 解析解, LS-DYNA仿真, 频率分析

Abstract: Impact of pneumatic cylinder at the stroke terminal was considered to be an integrated system of vibrations, including slender piston rod, mass load, piston and end cover.Based on one-dimensional wave equation, a mathematical model of longitudinal vibration of slender piston rod was established firstly. Impact force,contact displacement and contact time were analyzed by means of mode superposition method.Then impact process of pneumatic cylinder was numerically simulated by nonlinear FEM software LS-DYNA.The variation of impact interface force and contact time were studied in detail under different masses of driven load and impact velocities. Compared with numerical solution of LS-DYNA,the accuracy of analytical solution was verified, and how impact force varies as velocity and load was concluded. Vibration frequencies of impact response were furtherly analyzed, and reasons for the changes of impact forces were studied. Research conclusions provide reference for design and applications of pneumatic cylinders.

Key words: impact force of pneumatic cylinder, analytical solution, LS-DYNA , simulation, frequency analysis

中图分类号:

杜群贵, 孙智权, 黄崇溪, 翟晓晨. 气缸冲击动力学建模与仿真分析[J]. 中国机械工程.

Du Qungui, Sun Zhiquan, Huang Chongxi, Zhai Xiaochen. Impact Dynamics Modeling and Simulation Analyses of Pneumatic Cylinders[J]. China Mechanical Engineering.

参考文献

[1]廖理.冲击负载下气缸性能测试平台的研究与实现[D].成都:电子科技大学,2013.

[2]Love A E H. A Treatise on the Mathematical Theory of Elasticity [M].New York: Dover, 1994.

[3]张继业,曾京,舒仲周.杆的纵向冲击振动[J].振动与冲击, 1999,18(3):58-63.

Zhang Jiye,Zeng Jing,Shu Zhongzhou.Longitudinal Vibration of Prismatic Bar during Impact[J].Journal of Vibration and Shock,1999,18(3):58-63.

[4]Gan Chunbiao, Wei Yimin, Yang Shixi. Longitudinal Wave Propagation in a Rod with Variable Cross-section[J]. Journal of Sound and Vibration, 2014,333(2) :434-445.

[5]诸德超,邢誉峰. 点弹性碰撞问题之解析解[J].力学学报, 1996,28(1):99-103.

Zhu Dechao, Xing Yufeng. Analytical Solution of Point Elastic Impact between Structures[J].Chinese Journal of Theoretical and Applied Mechanics,1996, 28(1):99-103.

[6]吴家强,王宏志. 杆的纵向冲击问题全过程分析[J]. 振动与冲击,2004,23(1):103-106.

Wu Jiaqiang, Wang Hongzhi. General Procedure for Analysis of Axial Response of Prismatic Bar during Impact[J].Journal of Vibration and Shock, 2004, 23(1):103-106.

[7]鲍四元. 弹性碰撞问题的模态叠加法及哈密顿体系下的计算研究[D].西安:西北工业大学,2005.

[8]Li Q S,Wu J R, Xu J. Longitudinal Vibration of Multi-step Non-uniform Structures with Lumped Masses and Spring Supports[J]. Applied Acoustics,2002,63(3):333-350.

[9]孙龙.潜孔锤及声波钻柔体振动冲击的理论与建模[D].北京:中国地质大学,2014.

[10]倪振华.振动力学[M].西安:西安交通大学出版社,1990.

[11]王泽鹏,胡仁喜,康士廷,等.ANSYS14.5/LS-DYNA非线性有限元分析实例指导教程[M].北京:机械工业出版社,2013.