新型高阶非圆锥齿轮的设计及其节面修形方法研究

摘要/Abstract

摘要：

将帕斯卡曲线和阿基米德螺线应用到非圆锥齿轮的设计中，推导了该新型非圆锥齿轮节面的数学模型。针对非圆锥齿轮设计过程中可能存在的节面尖点问题，将产形刀具的部分节面作为非圆锥齿轮节面尖点处的节面，依据产形刀具节面与高阶非圆锥齿轮节面之间的运动关系，建立了新型非圆锥齿轮的节面修形模型，开发了非圆锥齿轮的齿廓产形算法。并采用该方法对实例中的高阶阿基米德螺线锥齿轮和二次曲线锥齿轮的节面尖点进行了修正。

关键词: 非圆锥齿轮, 帕斯卡曲线, 节曲线, 尖点, 节面修形

Abstract:

Archimedes spiral and Pascal curve were firstly used to design NBGs, the pitch surface mathematical model of NBGs was deduced. Aiming at cusp problems of pitch surface of high-order NBG pairs, a section pitch surface curve of generation cutter was considered as pitch surface lied in high-order NBGs cusp. According to motion relationship between pitch surface of cutter and that of the high-order NBGs, pitch surface shaping model of the high-order NBGs was established and generation algorithm of NBGs teeth profile was developed. High-order Archimedes spiral bevel gear and quadratic curve bevel gear were selected as cases to verify design practicability and pitch curve shaping method of high-order NBG.

Key words: non-circular bevel gear(NBG), Pascal curve, pitch curve, cusp, pitch surface shaping

中图分类号:

TH122

吕刚, 范守文, 李光辉, 童水光, 肖人源. 新型高阶非圆锥齿轮的设计及其节面修形方法研究[J]. 中国机械工程, 2015, 26(22): 2989-2995.

Lü Gang, Fan Shouwen, Li Guanghui, Tong Shuiguang, Xiao Renyuan. Research on Design and Pitch Surface Shaping of New Type High-order Non-circular Gear[J]. China Mechanical Engineering, 2015, 26(22): 2989-2995.

参考文献

[1]刘大伟, 任廷志. 由补偿法构建封闭非圆齿轮节曲线[J].机械工程学报,2011,47(17):147-152.
Liu Dawei, Ren Tingzhi. Creating Pitch Curve of Closed Noncircular Gear by Compensation Method[J]. Journal of Mechanical Engineering, 2011, 43(17):147-152.
[2]Giorgio F, Jorge A. The Synthesis of Elliptical Gears Generated by Shaper-cutters[J]. ASME Journal of Mechanical Design, 2003, 125(4): 793- 801.
[3]Giorgio F, Jorge A. Synthesis of the Pitch Cones of N-lobed Elliptical Bevel Gears[J]. ASME Journal of Mechanical Design, 2011, 133(3): 031002.1-031002.8.
[4]林超,侯玉杰,龚海,等.高阶变性椭圆锥齿轮传动模式设计与分析[J].机械工程学报, 2011, 47(13):131-139.
Lin Chao, Hou Yujie, Gong Hai, et al. Design and Analysis of Transmission Mode for High-order Deformed Elliptic Bevel Gears[J]. Journal of Mechanical Engineering, 2011, 47(13): 131-139.
[5]林超, 龚海, 侯玉杰,等.偏心高阶椭圆锥齿轮副设计与传动特性分析[J].农业机械学报, 2011,42(11):214-221.
Lin Chao, Gong Hai, Hou Yujie, et al. Design Method of Eccentric-high Order Elliptical Bevel Gear Pair and Analysis of Its Transmission Characteristics[J]. Journal of Agricultural Machinery, 2011,42(11):214-221.
[6]林超, 龚海, 侯玉杰,等. 高阶椭圆锥齿轮齿形设计与加工[J].中国机械工程, 2012, 23(3):253-258.
Lin Chao, Gong Hai, Hou Yujie, et al. Tooth Profile Design and Manufacture of High-order Elliptical Bevel Gear[J]. China Mechanical Engineering, 2012, 23(3):253-258.
[7]林超, 侯玉杰, 冉小虎,等.高阶椭圆锥齿轮的传动模型与干涉检查的运动仿真[J]. 重庆大学学报, 2010,33(10):1-6.
Lin Chao, Hou Yujie, Ran Xiaohu, et al.Transmission Model of Higher-order Elliptical Bevel Gearing and Motion Simulation for Interference Checking[J]. Journal of Chongqing University, 2010,33(10):1-6.
[8]Xia Jiqiang, Liu Yuanyuan, Geng Chunming, et al. Noncircular Bevel Gear Transmission With Intersecting Axes[J]. ASME Journal of Mechanical Design, 2003, 2008,130(5):054502.1- 054502.7.
[9]Shi Kan, Xia Jiqiang, Wang Chunjie, et al. Design of Noncircular Bevel Gears with Concave Pitch Curve[J]. Proceedings of the Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Science, 2012,227(3): 542-553.
[10]Lin Jing. Tooth Surface Generation and Geometric Properties of Straight Noncircular Bevel Gears[J]. ASME Journal of Mechanical Design, 2012,134(8):084503.1-084503.6.
[11]Stefano Z, Christian M F, Marco F. A Method for the Design of Ring Dampers for Gears in Aeronautical Applications[J]. ASME Journal of Mechanical Design, 2012, 134(9):091003.1-091003.10.
[12]任廷志,程爱明,景奉儒. 蜗线齿轮及其共轭齿轮的几何分析与仿真[J].机械工程学报,2006,42(9): 71-76.
Ren Tingzhi, Cheng Aiming, Jing Fengru. Limacon Gear and Conjugated Gear’s Geometry Analyse and Simulation[J]. Journal of Mechanical Engineering, 2006,42(9): 71- 76.
[13]Yan Jia, Yang D C, Tong S H. On the Generation of Analytical Noncircular Multilobe Internal Pitch Curves[J]. ASME Journal of Mechanical Design, 2008, 130(8):092601.1- 092601.8.
[14]王亚洲, 胡赤兵, 刘永平. Pascal蜗线型齿轮滚切插补算法对比[J].上海交通大学学报[J], 2014,48(1): 45-49.
Wang Yazhou, Hu Chibing, Liu Yongping. Comparison of Hobbing Interpolation Algorithms of Pascal Curve Gear[J]. Journal of Shanghai Jiao Tong University,2014,48(1): 45-49.