闭环双驱动混合输出六自由度并联机构运动分析

摘要/Abstract

摘要：

提出一种分支含闭环双驱动单元、可实现混合输出的六自由度并联机构。分析了动平台混合运动时驱动分支的等效形式，以及独立位姿运动和振动时驱动分支的等效形式;分析了混合运动关于位姿运动输入和振动输入的位置反解，对振动输入的位置反解设计了基于机构运动特点的逐次逼近法；运用螺旋理论求得动平台混合运动时关于全体12个独立广义坐标的一、二阶影响系数，得到从广义输入到动平台旋量速度、加速度的线性映射；通过数值算例分别对位姿运动输入和振动输入的理论分析结果进行了验证,算例仿真表明,提出的两种双驱动输入分配计算规则均能得到确定的混合运动输出。

关键词: 并联机构, 闭环双驱动, 旋量, 混合输出

Abstract:

A parallel mechanism that can accomplish 6 dimensional composite output was proposed,each leg of it had a closed-loop dual-drive unit.The equivalent form of one leg was analysed when the moving platform was under composite motion,so as the equivalent form of one leg corresponding to independent position and orientation motion and vibration.The inverse position solution about position and orientation drive and vibration drive were analysed,for inverse position solution of vibration drive,a kind of successive approximation method was designed based on the motional features of mechanism.Using screw theory the first and second order influence coefficients of all the 12 general coordinates were obtained, so the linear mapping from general inputs to screw velocity and acceleration of moving platform was obtained.Theoretical analyses of position and orientation motion drive and vibration drive were verified by numerical examples,it is indicated by the numerical simulation that composite output can accomplish through the two rules presented for dual-drive distribution.

Key words: parallel mechanism, closed-loop dual-drive, screw, composite output

中图分类号:

TP24
V19

陈宇航, 赵铁石, 耿明超, 苑飞虎, 李二伟, . 闭环双驱动混合输出六自由度并联机构运动分析[J]. 中国机械工程, 2015, 26(20): 2793-2800,2805.

Chen Yuhang, Zhao Tieshi, Geng Mingchao, Yuan Feihu, Li Erwei, . Kinematic Analysis of a 6-DOF Parallel Mechanism with Closed Loop Dual-drive and Composite Output[J]. China Mechanical Engineering, 2015, 26(20): 2793-2800,2805.

参考文献

[1]杨建中. Stewart并联机器人在航天器上的应用 [C]//全国第十二届空间及运动体控制技术学术会议论文集.北京: 中国空间技术研究院,2006:426-431.
[2]Sharon A,Hogan N,Hardt D E.High Bandwidth Force Regulation and Inertia Reduction Using a Macro/Micro Manipulator System[C]//The 1988 IEEE International Conference on Robotics and Automation.Philadelphia:IEEE,1988:126-132.
[3]孙立宁,董为,杜志江. 宏/微双重驱动机器人系统的研究现状与关键技术[J].中国机械工程,2005,16(1):91-95.
Sun Lining,Dong Wei,Du Zhijiang.State-of-the-Art and Key Technologies of Macro/Micro Dual Manipulator System[J].China Mechanical Engineering,2005,16(1):91-95.
[4]Yang Tangwen,Xu Weiliang,Han Jianda.Dynamic Compensation Control of Flexible Macro-Micro Manipulator Systems[J].IEEE Transactions on Control Systems Technology,2010,18(1):143-151.
[5]Taghirad H D,Nahon M A.Jacobian Analysis of a Macro-micro Parallel Manipulator[C]//IEEE/ASME International Conference on Advanced Intelligent Mechatronics.Zurich:IEEE,2007:1-6.
[6]Lew J Y,Trudnowski D J.Vibration Control of a Micro/Macro-manipulator System[J].Control Systems,IEEE,1996,16(1):26-31.
[7]Feng J,Gao F,Zhao X,et al.A New Macro-micro Dual Drive Parallel Robot for Chromosome Dissection[J].Journal of Mechanical Science and Technology,2012,26(1):187-194.
[8]Duan Xuechao,Qiu Yuanying,Du Jingli,et al.Real-time Motion Planning for the Macro-micro Parallel Manipulator System[C]//2011 IEEE International Conference on Robotics and Automation(ICRA).Shanghai:IEEE,2011:4214-4219.
[9]Yuan Yun,Li Yangming.Modeling and Control Analysis of a 3-PUPU Dual Compliant Parallel Manipulator for Micro Positioning and Active Vibration Isolation[J].Journal of Dynamic Systems,Measurement,and Control, 2012,134(2):021001.
[10]Dong Wei,Sun Lining,Du Zhijiang. Design of a Precision Compliant Parallel Positioner Driven by Dual Piezoelectric Actuators[J]. Sensors and Actuators A:Physical,2007,135(1):250-256.
[11]李伟鹏,黄海.基于Hexapod的精密跟瞄平台研究[J].宇航学报,2010,31(3):681-686.
Li Weipeng,Huang Hai.Study of Space-born Precise Tracking/Pointing Platform Based on Hexapod[J].Journal of Astronautics, 2010, 31(3):681-686.
[12]崔龙,黄海.高稳定精密跟瞄机构设计与仿真[J].北京航空航天大学学报,2008,33(12):1462-1465.
Cui Long,Huang Hai.Design and Simulation of Highly Stable and Precise Tracking-pointing Platform[J].Journal of Beijing University of Aeronautics and Astronautics,2008,33(12):1462-1465.
[13]李伟鹏,黄海,边边.精密跟瞄Hexapod平台研制及其振动控制[J].航空学报,2009,30(2):259-264.
Li Weipeng,Huang Hai,Bian Bian.Design and Vibration Control of Precision Pointing Hexapod[J].ACTA Aeronautica et Astronautica Sinica,2009,30(2):259-264.
[14]赵铁石,冯海兵,刘艳辉,等.五自由度宏/微双重驱动并联机构及其运动学分析[J].燕山大学学报,2010,34(6):501-507.
Zhao Tieshi,Feng Haibing,Liu Yanhui,et al.5-DOF Dual-drive Parallel Mechanism and Its Kinematics[J].Journal of Yanshan University, 2010,34(6):501-507.
[15]Li Ningnin,Zhao Tieshi,Bian Hui.Type Synthesis of Dual-driven 4-DOF Parallel Mechanism[J].Machine Design and Research,2008,24(1): 51-53.
[16]范彩霞, 刘宏昭. 双驱动五自由度并联机构型综合[C]//第9届中国机构与机器科学应用国际会议(CCAMMS 2011) 暨中国轻工机械协会科技研讨会论文集. 上海: 中国机械工程学会机械传动分会机构学专业委员会,2011.
[17]范彩霞,刘宏昭.基于李群理论的双驱动2T3R五自由度并联机构型综合[J]. 中国机械工程,2012,17:2053-2057.
Fan Caixia,Liu Hongzhao.Type Synthesis of Dual-driven 2T3R 5-DOF Parallel Mechanism Based on Lie Group Theory[J],China Mechanical Engineering,2012,17:2053-2057.
[18]Huang Zhen，Liu Jingfang,Zeng axing.The General Method of Analysis of Mechanisms Mobility Based on Constraint Screw Theory[J].Science in China: E Series,2009,39(1):84-93.
[19]Zhang Hui,Wang Qiming,Ye Peiqing,et al.Forward Kinematics of General Stewart Platform and the Application[J].Journal of Mechanical Engineering,2002,38(Supp):108-112.
[20]Zhao Tieshi,Geng Mingchao,LiuXiao,et al.Kinematics and Dynamics Hessian Matrixes of Manipulators Based on Lie Bracket.[2013-03-06].http://www.paper.edu.cn/releasepaper/content/201303-167.
[21]耿明超,赵铁石,赵飞等.非惯性系下弹性欠驱动机器人动力学建模及应用[J].中国机械工程,2014,15:2080-2085.
Geng Mingchao,Zhao Tieshi,Zhao Fei,et al.Dynamics Model of Elastic Underacutated Robot in a Non-inertial Frame and Its Applications[J].China Mechanical Engineering,2014,15:2080-2085.
[22]黄真, 赵永生, 赵铁石. 高等空间机构学[M].北京:高等教育出版社,2006.