基于局部振动测试的约束子结构模型修正方法

摘要/Abstract

摘要：

针对大型复杂结构模型修正中待识别参数过多、修正效率低等问题，提出一种基于局部振动测试的约束子结构模型修正方法。首先，利用子结构部分的振动测试响应构造约束子结构，从而将子结构从整体结构中隔离出来，形成独立简单的结构，有效地隔绝整体结构对子结构的影响。然后，基于构造的约束子结构响应数据，直接对待修正的目标子结构进行模型修正。最后，以一个T形钢管焊接结构和某发射台骨架为例，对所提方法的有效性进行了验证分析。结果表明，该方法不仅能够减少待识别参数，简化修正过程，而且修正效率及精度也较高，为大型复杂结构的模型修正提供了一种新思路。

关键词: 振动测试响应, 约束子结构, 模型修正, 目标函数

Abstract:

A new method of isolation substructure was proposed to update a local substructure based on local vibration test responses, aiming to solve the problems of the excessive identification parameters and low efficiency applied in large complex structure model updating. The method utilized the local structure's vibration test responses to construct the isolation substructure, in order to separate the substructure from the whole and constituted a simply independent structure, which could weaken the influence of the whole effectively. Then, the objective substructure was updated based on the responses of isolation substructure. Finally, a T shaped weld steel tube and the launch platform model were given to prove the effectiveness of the method. The results show that the proposed method contains fewer elements and can be updated easier with high efficiency, and it is well suitable for model updating of such large complex structure.

Key words: vibration test response, isolated substructure, model updating, objective function

中图分类号:

TU311

郭俊龙, 马立元, 李辉, 李世龙. 基于局部振动测试的约束子结构模型修正方法[J]. 中国机械工程, 2015, 26(15): 2046-2050.

Guo Junlong, Ma Liyuan, Li Hui, Li Shilong. Isolated Substructure Model Updating Method Based on Local Vibration Test Response[J]. China Mechanical Engineering, 2015, 26(15): 2046-2050.

参考文献

[1]Imregun M，Visser W J．A Review of Model Updating Techniques[J].The Shock and Vibration Digest，1991，23（1）： 9-20．
[2]Mottershead J E，Friswell M I．Model Updating in Structural Dynamics[J].Journal of Sound and Vibration，1993，167（2）：347-375．
[3]Friswell M I，Mottershead J E．Finite Element Model Updating in Structural Dynamics[M].Netherlands：Kluwer Academic Publishers，1995．
[4]Fritzen C P，Jennewein D，Kiefer T．Damage Detection Based on Model Updating Methods[J].Mechanical Systems and Signal Processing，1998，12（1）：163-186．
[5]Perer R，Ruiz A．A Multistage FE Updating Proeedure for Damage Identification in Large-scale Structures Based on Multiobjeetive Evolutionary Optimization[J].Mechanical Systems and Signal Processing，2008，22（4）：970-991．
[6]张纯，宋固全．去噪正则化模型修正方法在桥梁损伤识别中的应用[J]．振动工程学报，2012，25（1）：97-102．
Zhang Chun，Song Guquan．Bridge Damage Identification by Finite Element Model Updatingwith Tikhonov Regularization and Wavelet Denoising[J]．Journal of Vibration Engineering，2012，25（1）：97-102．
[7]钟儒勉，宗周红，秦中远,等．基于多尺度模型修正的结合梁斜拉桥损伤识别方法[J].东南大学学报（自然科学版），2014，44（2）：350-356．
Zhong Rumian，Zong Zhouhong，Qin Zhongyuan，et al．Damage Identification Method of Composite Cable-stayed Bridge Based on Multi-scale Model Updating[J]．Journal of Southeast University（Natural Science Edition），2014，44（2）：350-356．
[8]李世龙，王天辉，马立元,等．大型复杂结构损伤识别两步法研究[J].中国机械工程，2012，23（9）：1051-1055．
Li Shilong，Wang Tianhui，Ma Liyuan，et al．Study on Two-step Damage Detection Methods of Large and Complex Structures[J]．China Mechanical Engineering,2012，23（9）：1051-1055.
[9]侯吉林，欧进萍．基于局部模态的约束子结构法[J].力学学报，2009， 41（5）：748-756．
Hou Jilin，Ou Jinping．Isolated Substructure Model Updating Method Based on Local Impulse Response[J]．Engineering Mechanics，2009，41（5）：748-756．